Supersonic mixing and combustion control using streamwise vortices

In this paper, we present our experimental and numerical results for the supersonic mixing and combustion control. Our strategy of enhancing supersonic mixing is to use streamwise vortices. The reasons are (1) that in supersonic flows streamwise vortices can be generated quite easily and almost without additional losses in total pressure such as those due to shock waves, (2) that their breakdown into smaller scale, which is essential for mixing enhancement, can be controlled by their geometry in spanwise row configurations and by various combinations of their scales, intensity of circulation and rotational directions, and (3)that the hydrogen fuel can be injected into their core region. Several kind of alternating wedge struts are tested to examine the effects of the cited various combinations on the mixing enhancement. By presenting those results, we will discuss the formation mechanism of streamwise vortices and their downstream development, in particular the interaction between themselves in spanwise row configurations, their eventual breakdown into turbulent eddies. Firing tests are also carried out and the results for alternating wedge strut will be presented together with the results for a generic fuel injection strut for comparison. The results show the effectiveness of the present streamwise vortices for supersonic mixing enhancement and combustion control.

[1]  Neil D. Sandham,et al.  Compressible mixing layer - Linear theory and direct simulation , 1989 .

[2]  Antonio Ferri,et al.  Mixing-Controlled Supersonic Combustion , 1973 .

[3]  G. B. Northam,et al.  Mach 2 and Mach 3 mixing and combustion in scramjets , 1991 .

[4]  A. Roshko,et al.  The compressible turbulent shear layer: an experimental study , 1988, Journal of Fluid Mechanics.

[5]  N. A. Chigier,et al.  Vortex mixing for supersonic combustion , 1969 .

[6]  A. Roshko,et al.  On density effects and large structure in turbulent mixing layers , 1974, Journal of Fluid Mechanics.

[7]  Ephraim Gutmark,et al.  Mixing Enhancement in Supersonic Free Shear Flows , 1995 .

[8]  David W. Riggins,et al.  Mixing Enhancement in a Supersonic Combustor , 1989 .

[9]  Joseph A. Schetz,et al.  Fuel-vortex interactions for enhanced mixing in supersonic flow , 1996 .

[10]  J. Laufer,et al.  Measurements of heat transfer from fine wires in supersonic flows , 1956, Journal of Fluid Mechanics.

[11]  Edward E. Zukoski,et al.  A model for characterization of a vortex pair formed by shock passage over a light-gas inhomogeneity , 1994, Journal of Fluid Mechanics.

[12]  Goro Masuya,et al.  Spreading of two-stream supersonic turbulent mixing layers , 1986 .

[13]  T. Sunami,et al.  Mach 4 Tests of a Scramjet Engine-Effects of Isolator , 1997 .

[14]  S. Osher,et al.  A new class of high accuracy TVD schemes for hyperbolic conservation laws. [Total Variation Diminishing] , 1985 .

[15]  Mo Samimy,et al.  Compressibility effects in free shear layers , 1990 .

[16]  Frank E. Marble,et al.  Progress Toward Shock Enhancement of Supersonic Combustion Processes , 1987 .

[17]  Ian Anton Waitz.  An Investigation of Contoured Wall Injectors for Hypervelocity Mixing Augmentation , 1991 .

[18]  D. W. Bogdanoff,et al.  Compressibility Effects in Turbulent Shear Layers , 1983 .

[19]  Mark F. Reeder,et al.  Compressibility effects on large structures in free shear flows , 1992 .

[20]  H. Lomax,et al.  Thin-layer approximation and algebraic model for separated turbulent flows , 1978 .

[21]  J. A. Fox,et al.  On the inviscid stability of the laminar mixing of two parallel streams of a compressible fluid , 1965, Journal of Fluid Mechanics.

[22]  Alexander J. Smits,et al.  Constant-temperature hot-wire anemometer practice in supersonic flows. II - The inclined wire , 1983 .

[23]  A. Smits,et al.  Constant temperature hot-wire anemometer practice in supersonic flows , 1983 .

[24]  C. S. Byington,et al.  Evaluation of parallel injector configurations for supersonic combustion , 1989 .

[25]  S. D. Stouffer,et al.  Comparison of Wall Mixing Concepts for Scramjet Combustors , 1994 .

[26]  Noel T. Clemens,et al.  Two- and three-dimensional effects in the supersonic mixing layer , 1990 .

[27]  Neil D. Sandham,et al.  Three-dimensional simulations of large eddies in the compressible mixing layer , 1991, Journal of Fluid Mechanics.