Gysel Power Divider Realized by Ridge Gap Waveguide Technology

The novel ridge-gap waveguide (RGW) technology which uses a full metal structure has many advantages in micro/mm-wave frequencies such as low loss, broad bandwidth, low sensitivity to manufacturing errors, and easy integration with active components, etc. In this paper, a Ku-band Gysel power divider (GPD) is proposed and experimentally demonstrated based on the RGW technology for the first time, to the best of our knowledge. An RGW-to-WR62 transition is also designed and fabricated. The proposed RGW-based GPD with WR62 transitions shows low-loss equal-power division in phase with good impedance matching and isolation in the Ku band. The measured results are in good agreement with the simulations. Besides, it is shown that the proposed structure can be used as a 3-way GPD with an unequal power splitting ratio. The proposed RGW-based GPD can be extended to a 2N-way power divider which can find applications in solid-state power amplifiers, array antenna feed networks, etc.

[1]  Ashraf Uz Zaman,et al.  Gap Waveguide PMC Packaging for Improved Isolation of Circuit Components in High-Frequency Microwave Modules , 2014, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[2]  Ahmed A. Kishk,et al.  Wide band power divider based on Ridge gap waveguide , 2016, 2016 17th International Symposium on Antenna Technology and Applied Electromagnetics (ANTEM).

[3]  Per-Simon Kildal,et al.  Dispersion Characteristics of a Metamaterial-Based Parallel-Plate Ridge Gap Waveguide Realized by Bed of Nails , 2011, IEEE Transactions on Antennas and Propagation.

[4]  P. Kildal Definition of artificially soft and hard surfaces for electromagnetic waves , 1988 .

[5]  B. Henin,et al.  Wideband inphase power divider with compact size for high power applications , 2013, 2013 IEEE Antennas and Propagation Society International Symposium (APSURSI).

[6]  A. Farahbakhsh Ka-Band Coplanar Magic-T Based on Gap Waveguide Technology , 2020, IEEE Microwave and Wireless Components Letters.

[7]  S. Birgermajer,et al.  Microstrip-Ridge Gap Waveguide Filter Based on Cavity Resonators With Mushroom Inclusions , 2018, IEEE Transactions on Microwave Theory and Techniques.

[8]  Ulrich H. Gysel,et al.  A New N-Way Power Divider/Combiner Suitable for High-Power Applications , 1975 .

[9]  Marianna Ivashina,et al.  Spatial Power Combining and Splitting in Gap Waveguide Technology , 2016, IEEE Microwave and Wireless Components Letters.

[10]  Q. Xue,et al.  $N$ -Way Gysel Power Divider With Arbitrary Power-Dividing Ratio , 2019, IEEE Transactions on Microwave Theory and Techniques.

[11]  Eduardo Carrasco,et al.  Broadband reflectarrays made of cells with three coplanar parallel dipoles , 2014 .

[12]  Hongwen Yang,et al.  Design of Unequal Dual-Band Gysel Power Divider With Arbitrary Termination Resistance , 2011, IEEE Transactions on Microwave Theory and Techniques.

[13]  Mohsen Hayati,et al.  A Novel Design of Triple-Band Gysel Power Divider , 2013, IEEE Transactions on Microwave Theory and Techniques.

[14]  E. Rajo-Iglesias,et al.  Local Metamaterial-Based Waveguides in Gaps Between Parallel Metal Plates , 2009, IEEE Antennas and Wireless Propagation Letters.

[15]  Ali Banai,et al.  Direct Coupled Resonator Filters Realized by Gap Waveguide Technology , 2015, IEEE Transactions on Microwave Theory and Techniques.

[16]  Peng Zhao,et al.  A Quasi-Planar $H$ -Plane Waveguide Power Divider With Full Bandwidth , 2018, IEEE Microwave and Wireless Components Letters.

[17]  Jorge A. Ruiz-Cruz,et al.  Compact Ridge Waveguide Gysel Combiners for High-Power Applications , 2019, IEEE Transactions on Microwave Theory and Techniques.

[18]  A. Banai,et al.  Substrate-less oscillator module realized by gap waveguide technology for millimeter wave applications , 2017, 2017 47th European Microwave Conference (EuMC).

[19]  Wenquan Che,et al.  Size-Reduced Planar and Nonplanar SIW Gysel Power Divider Based on Low Temperature Co-fired Ceramic Technology , 2017, IEEE Microwave and Wireless Components Letters.

[20]  Yong Fan,et al.  Ka-Band Rectangular-Waveguide Gysel Power Divider with Low Insertion Loss and High Output Isolation , 2018, Journal of Infrared, Millimeter, and Terahertz Waves.

[21]  Ashraf Uz Zaman,et al.  Design and Fabrication of a High-Gain 60-GHz Corrugated Slot Antenna Array With Ridge Gap Waveguide Distribution Layer , 2016, IEEE Transactions on Antennas and Propagation.

[22]  Jinyi Ding,et al.  A Novel Five-Port Waveguide Power Divider , 2014, IEEE Microwave and Wireless Components Letters.

[23]  Jian Yang,et al.  A Slot Array Antenna With Single-Layered Corporate-Feed Based on Ridge Gap Waveguide in the 60 GHz Band , 2019, IEEE Transactions on Antennas and Propagation.

[25]  A. Banai,et al.  A power divider/combiner realized by ridge gap waveguide technology for millimeter wave applications , 2016, 2016 Fourth International Conference on Millimeter-Wave and Terahertz Technologies (MMWaTT).

[26]  Mikael Guegan,et al.  Erratum: A low‐consumption electronic system developed for a 10 km long all‐optical extension dedicated to sea floor observatories using power‐over‐fiber technology and SPI protocol , 2013 .

[28]  S. R. Zinka,et al.  Power Dividers and Directional Couplers , 2015 .

[29]  Qing-Xin Chu,et al.  A Ka-Band Waveguide Magic-T With Coplanar Arms Using Ridge-Waveguide Transition , 2017, IEEE Microwave and Wireless Components Letters.

[30]  Ali Banai,et al.  Substrateless Amplifier Module Realized by Ridge Gap Waveguide Technology for Millimeter-Wave Applications , 2016, IEEE Transactions on Microwave Theory and Techniques.

[31]  Eva Rajo-Iglesias,et al.  Losses in ridge gap waveguide compared with rectangular waveguides and microstrip transmission lines , 2010, Proceedings of the Fourth European Conference on Antennas and Propagation.