Analysis and design of coupled-cavity lasers - Part I: Threshold gain analysis and design guidelines

The analysis and design of two-section and multisection coupled-cavity lasers are treated in two parts. In this first part, the focus is on two-section laser design and control using threshold gains. In the second part numerical analysis of the transient behavior is given. The present treatment begins by using the poles of a linear transfer function for the coupled-cavity laser to obtain mode wavelengths and wavelength dependent threshold gains. A general wave scattering matrix describes the intercavity coupling, so that simple waveguide discontinuities or complex arrays of discontinuities can be modeled. Numerical examples are given. Design relationships obtained primarily from the scattering analysis, together with numerical examples, show the dependence and interdependence of the laser mode wavelengths and threshold gain minima on various parameters such as cavity and coupler lengths, indexes of refraction, and gains. These relationships show optimum or preferred coupling gap lengths and cavity length ratios for various design criteria. For example, for optimum mode and spurious rejection stability a short (\lsim40 \mum) cavity can be coupled via a gap approximately an integer number of half wavelengths long to a second longer cavity (\sim 100- 250 \mum). Conversely, for maximum tunability (or sensitivity to input changes) together with good mode selectivity, two medium length cavities (\sim 100-250 \mum) differing in length by a small amount (\lsim40 \mum) should be chosen.

[1]  Kenichi Iga,et al.  Monolithic two‐section GaInAsP/InP active‐optical‐resonator devices formed by reactive ion etching , 1981 .

[2]  C. Henry,et al.  Stabilization of single frequency operation of coupled-cavity lasers , 1984 .

[3]  Kenichi Iga,et al.  GaInAsP/InP laser with monolithically integrated monitoring detector , 1980 .

[4]  C. A. Burrus,et al.  CM and High-Speed Single-Longitudinal-Mode Operation of a Short InGaAsP Injection Laser with External Coupled Cavity , 1983 .

[5]  Larry A. Coldren,et al.  Single longitudinal mode operation of two-section GaInAsP/InP lasers under pulsed excitation , 1983 .

[6]  L. Coldren,et al.  Scattering Analysis and Design of SAW Resonator Filters , 1979, IEEE Transactions on Sonics and Ultrasonics.

[7]  E. Garmire,et al.  Amplification in cleaved-substrate lasers , 1980, IEEE Journal of Quantum Electronics.

[8]  K. Kurokawa,et al.  Power Waves and the Scattering Matrix , 1965 .

[9]  A. Yariv,et al.  Bistability and negative resistance in semiconductor lasers , 1982 .

[10]  Richard A. Linke,et al.  119 -km, 420 Mb/s Transmission with a 1.55 µm Single-Frequency Laser , 1983 .

[11]  C. Burrus,et al.  Short-cavity InGaAsP injection lasers: Dependence of mode spectra and single-longitudinal-mode power on cavity length , 1982 .

[12]  Larry A. Coldren,et al.  Single‐mode operation of coupled‐cavity GaInAsP/InP semiconductor lasers , 1983 .

[13]  Larry A. Coldren,et al.  Analysis of multielement semiconductor lasers , 1983 .

[14]  Simple spectral control technique for external cavity laser transmitters , 1982 .

[15]  Larry A. Coldren,et al.  Generation of single-longitudinal-mode subnanosecond light pulses by high-speed current modulation of monolithic two-section semiconductor lasers , 1982 .

[16]  N. A. Olsson,et al.  Stable single-longitudinal-mode operation under high-speed direct modulation in cleaved-coupled-cavity GaInAsP semiconductor lasers , 1983 .

[17]  R. Logan,et al.  Integrated electro‐optic intracavity frequency modulation of double‐heterostructure injection laser , 1975 .

[18]  Larry A. Coldren,et al.  Etched mirror and groove-coupled GaInAsP/InP laser devices for integrated optics , 1982 .

[19]  K. H. Cameron,et al.  External cavity controlled single longitudinal mode laser transmitter module , 1981 .