A systematic approach to describe the air terminal device in CFD simulation for room air distribution analysis

Abstract Proper specification of air terminal device boundary conditions is the essential element in accurate prediction of the air distribution in a ventilated room. The conventional method of describing the air terminal device boundary conditions requires large computing time, and some of the assumptions made are far from reality. This paper proposes a systematic approach that correctly and simply describes the air terminal device boundary conditions for CFD simulation. Based on the detailed study of the air terminal device characteristics, the specification of complicated air terminal device boundary conditions is transferred to the specification of a volume around the diffuser. One surface of the volume will be located inside the jet main region. The boundary conditions of the volume are calculated using the diffuser jet characteristic equations. This method was proved to be easy to use, more efficient, applicable to any type of diffusers and, above all, can correctly predict the airflow in a ventilated room. The predictions of the newly proposed method were compared with the predictions of the conventional model as well as with the measured data. It is shown that the prediction of the new model is significantly more accurate than the prediction of the conventional model.

[1]  Fariborz Haghighat,et al.  A CFD Analysis of Ventilation Effectiveness in a Partitioned Room , 1991 .

[2]  Fariborz Haghighat,et al.  The Influence of Office Furniture, Workstation Layouts, Diffuser Types and Location on Indoor Air Quality and Thermal Comfort Conditions at Workstations , 1996 .

[3]  Suhas V. Patankar,et al.  Numerical Prediction of Flow, Heat Transfer, Turbulence and Combustion: Selected Works of Professor D. Brian Spalding , 1983 .

[4]  P. Suter,et al.  Air flow Patterns within buildings : a database for assessing indoor airflow, air quality, and draught risk , 1992 .

[5]  Peter V. Nielsen.  Description of Supply Openings in Numerical Models for Room Air Distribution , 1992 .

[6]  Ying Zhang,et al.  The Impact of Ventilation Rate and Partition Layout on the VOC Emission Rate: Time‐Dependent Contaminant Removal , 1994 .

[7]  V. V. Baturin.  Fundamentals of industrial ventilation , 1972 .

[8]  Qingyan Chen,et al.  Comparison of Displacement and Mixing Diffusers , 1992 .

[9]  L. Christianson,et al.  Experimental Evaluation of a Numerical Simulation Model for Predicting Room Air Motion , 1993 .

[10]  Jin B Fang,et al.  A numerical method for calculating indoor airflows using a turbulence model , 1990 .

[11]  Peter V. Nielsen,et al.  The Velocity Characteristics of Ventilated Rooms , 1978 .

[12]  Peter V. Nielsen.  The Box Method: a Practical Procedure for Introduction of an Air Terminal Device in CFD Calculation , 1997 .

[13]  D. B. Spalding,et al.  A two-parameter model of turbulence, and its application to free jets , 1970 .