Investigation of flame establishment and stabilization mechanism in a kerosene fueled supersonic combustor equipped with a thin strut

Abstract The flame establishment and propagation processes in a supersonic combustor fueled by liquid kerosene at Mach 6 condition were observed by high speed photography. In this paper, a thin strut acted as the flame holder equipped in the center of the combustor. In the experiment condition, the Mach number in the inlet of the combustor is 2.8, with the stagnation state T t = 1680 K , P t = 1.87 MPa . The combustion establishment process and the flame characteristics in the supersonic combustor were well captured and reproduced by the high-speed camera, with the camera parameter of 5000 frames per second. Experimental results show that initial flame appears around the plasma jet torch in the recirculation zone at the tailing edge of the strut, and grows to form a steady flame in the center of main inflow. The attribute of the flame is partially premixed flame in the experimental conditions, and the flame could be divided into three main parts in accordance with the flame characteristics. By the analysis of the high speed images, different flame propagation patterns in the flame establishment processes are found in different equivalence ratios, the mechanism of which is explained in this paper.

[1]  Wei Huang.  Investigation on the effect of strut configurations and locations on the combustion performance of a typical scramjet combustor , 2015 .

[2]  Jian Li,et al.  IGNITION TRANSIENT IN AN ETHYLENE FUELED SCRAMJET ENGINE WITH AIR THROTTLING , 2010 .

[3]  Nickolay Smirnov,et al.  Experimental investigation of deflagration to detonation transition in hydrocarbon-air gaseous mixtures , 1995 .

[4]  Meng Wu,et al.  Effects of upstream strut on the combustion of liquid kerosene in a model cavity scramjet , 2014 .

[5]  Jianhan Liang,et al.  Spark ignition process in a scramjet combustor fueled by hydrogen and equipped with multi-cavities at Mach 4 flight condition , 2012 .

[6]  Jun-tao Chang,et al.  Experimental and numerical investigation on hysteresis characteristics and formation mechanism for a variable geometry dual-mode combustor , 2017 .

[7]  Jun-tao Chang,et al.  Numerical studies for performance improvement of a variable geometry dual mode combustor by optimizing deflection angle , 2017 .

[8]  Takeshi Kanda,et al.  Reaction and Mixing-Controlled Combustion in Scramjet Engines , 2001 .

[9]  Jialing Le,et al.  Investigation of combustion process of a kerosene fueled combustor with air throttling , 2017 .

[10]  Xu Xu,et al.  Flame Stabilization and Propagation in Dual-Mode Scramjet with Staged-Strut Injectors , 2017 .

[11]  Jiang Qin,et al.  Combustion stabilization based on a center flame strut in a liquid kerosene fueled supersonic combustor , 2013 .

[12]  Wen Bao,et al.  Flame Transition in Dual-Mode Scramjet Combustor with Oxygen Piloted Ignition , 2014 .

[13]  Daren Yu,et al.  Effect of structural factors on maximum aerodynamic heat flux of strut leading surface , 2014 .

[14]  Ye Tian,et al.  Study on flame stabilization of a hydrogen and kerosene fueled combustor , 2016 .

[15]  Li Yan,et al.  Numerical investigation on the ram–scram transition mechanism in a strut-based dual-mode scramjet combustor , 2016 .

[16]  L. A. Povinelli.  Drag and distribution measurements of single-element fuel injectors for supersonic combustors , 1974 .

[17]  Nickolay Smirnov,et al.  A study of deflagration and detonation in multiphase hydrocarbon-air mixtures , 1994 .

[18]  Krishna Murari Pandey,et al.  Effect of variation of length-to-depth ratio and Mach number on the performance of a typical double cavity scramjet combustor , 2016 .

[19]  F. Billig,et al.  Supersonic Combustion Experiments with a Cavity-Based Fuel Injector (Postprint) , 2001 .

[20]  Li Yan,et al.  Survey on the mode transition technique in combined cycle propulsion systems , 2014 .

[21]  Wen Bao,et al.  Flow field characteristics analysis and combustion modes classification for a strut/cavity dual-mode combustor , 2017 .

[22]  Derek B. Ingham,et al.  Variation of inlet boundary conditions on the combustion characteristics of a typical cavity-based scramjet combustor , 2014 .

[23]  Matthew Fotia,et al.  Ram-Scram Transition and Flame/Shock-Train Interactions in a Model Scramjet Experiment , 2013 .

[24]  Wen Bao,et al.  Numerical and experimental investigation of improving combustion performance of variable geometry dual-mode combustor , 2017 .

[25]  Wei Huang,et al.  Parametric effects on the combustion flow field of a typical strut-based scramjet combustor , 2011 .

[26]  Wen Bao,et al.  Effect of Fuel Injection Allocation on the Combustion Characteristics of a Cavity-Strut Model Scramjet , 2015 .

[27]  Jun-tao Chang,et al.  Pressure rising slope variation accompanying with combustion mode transition in a dual-mode combustor , 2017 .

[28]  Nickolay Smirnov,et al.  Evaporation and ignition of droplets in combustion chambers modeling and simulation , 2012 .

[29]  Jing Lei,et al.  Numerical investigation on the shock wave transition in a three-dimensional scramjet isolator , 2011 .

[30]  Meng Wu,et al.  Combustion characteristic using O2-pilot strut in a liquid-kerosene-fueled strut-based dual-mode scramjet , 2013 .

[31]  Jun-tao Chang,et al.  Effects of strut swept angle on the drag of scramjet , 2012 .

[32]  Campbell D. Carter,et al.  Mixing and combustion studies using cavity-based flameholders in a supersonic flow , 2004 .

[33]  Ning Qin,et al.  Combustion characteristics in a supersonic combustor with hydrogen injection upstream of cavity flameholder , 2013 .

[34]  Jianhan Liang,et al.  Experimental investigation on combustion performance of cavity-strut injection of supercritical kerosene in supersonic model combustor , 2016 .

[35]  Li Yan,et al.  Numerical validation and parametric investigation on the cold flow field of a typical cavity-based scramjet combustor , 2012 .

[36]  Zhenguo Wang,et al.  Experimental study of oscillations in a scramjet combustor with cavity flameholders , 2013 .

[37]  Jian Chen,et al.  Plasma-assisted ignition for a kerosene fueled scramjet at Mach 1.8 , 2013 .

[38]  Meng Wu,et al.  Combustion characteristics of a dual-mode scramjet injecting liquid kerosene by multiple struts , 2015 .

[39]  Zhenguo Wang,et al.  Experimental Investigation of Supersonic Model Combustor with Distributed Injection of Supercritical Kerosene , 2014 .

[40]  Jianwen Xing,et al.  Experimental and computational study on combustion performance of a kerosene fueled dual-mode scramjet engine , 2015 .

[41]  Drummond J. Philip,et al.  Future Direction of Supersonic Combustion Research: Air Force/NASA Workshop on Supersonic Combustion , 1997 .

[42]  Masatoshi Kodera,et al.  Numerical Study on the Supersonic Mixing Enhancement Using Streamwise Vortices , 2002 .

[43]  Weidong Liu,et al.  Characterization of kerosene distribution around the ignition cavity in a scramjet combustor , 2017 .

[44]  Jun Liu,et al.  Influences of the turbulence model and the slot width on the transverse slot injection flow field in supersonic flows , 2012 .

[45]  Paul J. Waltrup,et al.  Liquid-fueled supersonic combustion ramjets - A research perspective , 1987 .