Experimentally validated structural finite element method analysis of a tibial intramedullary nail: Optimal choice of the contact settings

This article focuses on the static structural analysis of a tibial intramedullary nail, carried out by the finite element method. The investigated subject is concerned with the issue of frictional contacts that, generating a non-linear problem, play an important role in numerical analyses. Experimental tests were also developed on tibial intramedullary nail specimens. The experimental results, in terms of force–displacement, were used to calibrate and validate the finite element analysis, by tuning the contact parameters available in the software.

[1]  Giorgio Olmi,et al.  Tribological properties of bolts depending on different screw coatings and lubrications: An experimental study , 2017 .

[2]  M. Bouxsein,et al.  Tibial ultrasound velocity measured in situ predicts the material properties of tibial cortical bone. , 1997, Bone.

[3]  G J Hooper,et al.  Conservative management or closed nailing for tibial shaft fractures. A randomised prospective trial. , 1991, The Journal of bone and joint surgery. British volume.

[4]  S. Goldstein,et al.  Elastic modulus and hardness of cortical and trabecular bone lamellae measured by nanoindentation in the human femur. , 1999, Journal of biomechanics.

[5]  A. Alho,et al.  Comparison of functional bracing and locked intramedullary nailing in the treatment of displaced tibial shaft fractures. , 1992, Clinical orthopaedics and related research.

[6]  K. Dickson,et al.  Unreamed rod with early wound closure for grade IIIA and IIIB open tibial fractures: analysis of 40 consecutive patients. , 1998, Orthopedics.

[7]  P Zioupos,et al.  Mechanical properties and the hierarchical structure of bone. , 1998, Medical engineering & physics.

[9]  J. Hsu,et al.  Advances in Tibial Nailing , 2006 .

[10]  K. Dickson,et al.  Delayed unions and nonunions of open tibial fractures. Correlation with arteriography results. , 1994, Clinical orthopaedics and related research.

[11]  J. Lucke,et al.  Nonreamed Nailing of Tibial Diaphyseal Fractures in Blunt Polytrauma Patients , 1995, Journal of orthopaedic trauma.

[12]  Paul Tornetta,et al.  Treatment of closed tibial fractures. , 2003, Instructional course lectures.

[13]  S. Fini,et al.  The influence of lubrication on the frictional characteristics of threaded joints for planetary gearboxes , 2016 .

[14]  D. Croccolo,et al.  Analysis of the Influence of Fretting on the Fatigue Life of Interference Fitted Joints , 2014 .

[15]  P. Augat,et al.  The stability of a hip fracture determines the fatigue of an intramedullary nail , 2010, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[16]  Bernard Sanschagrin,et al.  Finite element analysis and contact modelling considerations of interference fits for fretting fatigue strength calculations , 2009, Simul. Model. Pract. Theory.

[17]  D Croccolo.  Special section on bolted joints and mechanical connections of components: state of the art and new prospectives for future performance from researchers and engineers , 2016 .

[18]  Roger A. Sauer,et al.  A computational contact formulation based on surface potentials , 2013 .

[19]  Douglas J. Pacaccio,et al.  Finite element analysis of a pseudoelastic compression-generating intramedullary ankle arthrodesis nail. , 2016, Journal of the mechanical behavior of biomedical materials.

[20]  David Nowell,et al.  On the finite element analysis of contacting bodies using submodelling , 2005 .

[21]  C. Krettek,et al.  Superior Results of Tibial Rodding Versus External Fixation in Grade 3B Fractures , 1997, Clinical orthopaedics and related research.

[22]  R. B. Ashman,et al.  Relations of mechanical properties to density and CT numbers in human bone. , 1995, Medical engineering & physics.

[23]  A L Yettram,et al.  Finite element analysis of intramedullary devices: The effect of the gap between the implant and the bone , 2008, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[24]  T. Hangartner,et al.  Computed-tomography-based finite-element models of long bones can accurately capture strain response to bending and torsion. , 2011, Journal of biomechanics.

[25]  Dario Croccolo,et al.  Structural Analysis of an Articulated Urban Bus Chassis via FEM: a Methodology Applied to a Case Study , 2011 .

[26]  Dario Croccolo,et al.  Influence of tightening procedures and lubrication conditions on titanium screw joints for lightweight applications , 2012 .

[27]  M. Bhandari,et al.  Early versus delayed operative management of closed tibial fractures. , 1999, Clinical orthopaedics and related research.

[28]  S. García-Rodríguez,et al.  A Calibration Procedure for a Bone Loading System , 2008 .

[29]  M. Swiontkowski,et al.  Treatment of type II, IIIA, and IIIB open fractures of the tibial shaft: a prospective comparison of unreamed interlocking intramedullary nails and half-pin external fixators. , 1998, Journal of orthopaedic trauma.

[30]  R. B. Ashman,et al.  Young's modulus of trabecular and cortical bone material: ultrasonic and microtensile measurements. , 1993, Journal of biomechanics.