Delamination Detection in Polymeric Ablative Materials Using Pulse-Compression Thermography and Air-Coupled Ultrasound

Ablative materials are used extensively in the aerospace industry for protection against high thermal stresses and temperatures, an example being glass/silicone composites. The extreme conditions faced and the cost-risk related to the production/operating stage of such high-tech materials indicate the importance of detecting any anomaly or defect arising from the manufacturing process. In this paper, two different non-destructive testing techniques, namely active thermography and ultrasonic testing, have been used to detect a delamination in a glass/silicone composite. It is shown that a frequency modulated chirp signal and pulse-compression can successfully be used in active thermography for detecting such a delamination. Moreover, the same type of input signal and post-processing can be used to generate an image using air-coupled ultrasound, and an interesting comparison between the two can be made to further characterise the defect.

[1]  Luis S. Rosado,et al.  Advances in NDT and Materials Characterization by Eddy Currents , 2013 .

[2]  Y. Y. Hung,et al.  Review and comparison of shearography and active thermography for nondestructive evaluation , 2009 .

[3]  Luigi Ferrigno,et al.  An experimental comparison of multi-frequency and chirp excitations for eddy current testing on thin defects , 2015 .

[4]  D. Hutchins,et al.  Multi-spectral near infrared NDE of polymer composites , 2019, NDT & E International.

[5]  Gui Yun Tian,et al.  New features for delamination depth evaluation in carbon fiber reinforced plastic materials using eddy current pulse-compression thermography , 2019, NDT & E International.

[6]  J A Jensen,et al.  Potential of coded excitation in medical ultrasound imaging. , 2000, Ultrasonics.

[7]  Ravibabu Mulaveesala,et al.  Pulse Compression with Gaussian Weighted Chirp Modulated Excitation for Infrared Thermal Wave Imaging , 2014 .

[8]  M. Ricci,et al.  The use of pulse-compression thermography for detecting defects in paintings , 2018, NDT & E International.

[9]  M. Duguay,et al.  Compression of optical pulses , 1968 .

[10]  W. Bisle,et al.  In-Service Inspection Concept for GLARE ® – An Example for the Use of New UT Array Inspection Systems , 2006 .

[11]  G. Carlomagno,et al.  The use of infrared thermography for materials characterization , 2004 .

[12]  Renaldas Raisutis,et al.  Application of ultrasonic guided waves for non-destructive testing of defective CFRP rods with multiple delaminations , 2010 .

[13]  Joseph L. Rose,et al.  Ultrasonic Guided Waves for Anomaly Detection in Aircraft Components , 2000 .

[14]  Delamination detection and impact damage assessment of GLARE by active thermography , 2011 .

[15]  R Kazys,et al.  Air-coupled ultrasonic investigation of multi-layered composite materials. , 2006, Ultrasonics.

[16]  Michel Castaings,et al.  Air-coupled ultrasonic C-scan technique in impact response testing of carbon fibre and hybrid: glass, carbon and Kevlar/epoxy composites , 2004 .

[17]  Angelo Farina,et al.  Simultaneous Measurement of Impulse Response and Distortion with a Swept-Sine Technique , 2000 .

[18]  Marco Ricci,et al.  Pulse Compression in Nondestructive Testing Applications: Reduction of Near Sidelobes Exploiting Reactance Transformation , 2019, IEEE Transactions on Circuits and Systems I: Regular Papers.

[19]  Yuan Yao,et al.  Sparse Principal Component Thermography for Subsurface Defect Detection in Composite Products , 2018, IEEE Transactions on Industrial Informatics.

[20]  Yunze He,et al.  Impact evaluation in carbon fiber reinforced plastic (CFRP) laminates using eddy current pulsed thermography , 2014 .

[21]  N. Chen,et al.  Rapid and nondestructive analysis of quality of prepreg cloth by near-infrared spectroscopy , 2005 .

[22]  D. Schindel,et al.  The use of broadband acoustic transducers and pulse-compression techniques for air-coupled ultrasonic imaging. , 2001, Ultrasonics.

[23]  C. Scarponi,et al.  Ultrasonic technique for the evaluation of delaminations on CFRP, GFRP, KFRP composite materials , 2000 .

[24]  Nicola Femia,et al.  A Pulse Compression procedure for power inductors modeling up to moderate non-linearity , 2019, Integr..

[25]  D. Hutchins,et al.  Design and characterization of 3D-printed phononic crystals for sub-MHz ultrasound manipulation , 2015, 2015 IEEE International Ultrasonics Symposium (IUS).

[26]  Aguinaldo Fraddosio,et al.  Mechanical characterization of CFRP composites by ultrasonic immersion tests: Experimental and numerical approaches , 2014 .

[27]  Sevan Harput,et al.  The effect of amplitude modulation on subharmonic imaging with chirp excitation , 2013, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control.

[28]  Peter Burgholzer,et al.  Three-dimensional thermographic imaging using a virtual wave concept , 2017 .

[29]  J. Kenny,et al.  Science and technology of polymeric ablative materials for thermal protection systems and propulsion devices: A review , 2016 .

[30]  J. Gunnink,et al.  Glare Technology Development 1997–2000 , 2002, Applied Composite Materials.

[31]  Pierrick Lotton,et al.  Nonlinear System Identification Using Exponential Swept-Sine Signal , 2010, IEEE Transactions on Instrumentation and Measurement.

[32]  Pietro Burrascano,et al.  Coded waveforms for optimised air-coupled ultrasonic nondestructive evaluation. , 2014, Ultrasonics.

[33]  M. Ricci,et al.  Detection of rebars in concrete using advanced ultrasonic pulse compression techniques , 2017, Ultrasonics.

[34]  S. Marinetti,et al.  Pulse phase infrared thermography , 1996 .

[35]  Charles E. Cook,et al.  Pulse Compression-Key to More Efficient Radar Transmission , 1960, Proceedings of the IRE.

[36]  Pietro Burrascano,et al.  Exploiting Pseudorandom Sequences to Enhance Noise Immunity for Air-Coupled Ultrasonic Nondestructive Testing , 2012, IEEE Transactions on Instrumentation and Measurement.

[37]  Ravibabu Mulaveesala,et al.  Coded excitation for infrared non-destructive testing of carbon fiber reinforced plastics. , 2011, The Review of scientific instruments.

[38]  Renaldas Raisutis,et al.  Ultrasonic air-coupled testing of square-shape CFRP composite rods by means of guided waves , 2011 .

[39]  Yang Wang,et al.  Study of inspection on metal sheet with subsurface defects using linear frequency modulated ultrasound excitation thermal-wave imaging (LFM-UTWI) , 2014 .

[40]  J. Gunnink,et al.  GLARE TECHNOLOGY DEVELOPMENT , 2002 .

[41]  Garrett F. Farrell,et al.  Spectroscopic analysis of single-walled carbon nanotubes and semiconjugated polymer composites. , 2004, The journal of physical chemistry. B.

[42]  Sergio Callegari,et al.  Industrial Applications of Noncontact Ultrasonics Techniques , 2015 .

[43]  Peter Cawley,et al.  Single Sided Inspection of Composite Materials Using Air Coupled Ultrasound , 1998 .

[44]  G. Turin,et al.  An introduction to matched filters , 1960, IRE Trans. Inf. Theory.

[45]  Xavier Maldague,et al.  Applications of infrared thermography in nondestructive evaluation , 2000 .

[46]  Clemente Ibarra-Castanedo,et al.  Inspection of aerospace materials by pulsed thermography, lock-in thermography, and vibrothermography: a comparative study , 2007, SPIE Defense + Commercial Sensing.

[47]  Jose Maria Kenny,et al.  Degradation behaviour of a composite material for thermal protection systemsPart II Process simulation , 1998 .

[48]  Yukihiro Ozaki,et al.  Advantages of near infrared spectroscopy for the analysis of polymers and composites , 1999 .

[49]  L. Rosenhead.  Conduction of Heat in Solids , 1947, Nature.

[50]  Dominick V. Rosato,et al.  Environmental effects on polymeric materials , 1968 .

[51]  Y. Y. Hung.  Shearography: A novel and practical approach for nondestructive inspection , 1989 .

[52]  A. Donskoy.  Elastomeric Heat-Shielding Materials for Internal Surfaces of Missile Engines , 1996 .

[53]  Xavier Maldague,et al.  Robust quantitative depth estimation on CFRP samples using active thermography inspection and numerical simulation updating , 2017 .

[54]  Tat-Hean Gan,et al.  Air-coupled ultrasonic evaluation of food materials , 2007 .

[55]  Sandor Popovics,et al.  Ultrasonic pulse velocity test of concrete properties as specified in various standards , 1996 .

[56]  J. Klauder,et al.  The theory and design of chirp radars , 1960 .

[57]  C. Maierhofer,et al.  Characterizing damage in CFRP structures using flash thermography in reflection and transmission configurations , 2014 .

[58]  Andreas Mandelis,et al.  Thermal-wave radar: a novel subsurface imaging modality with extended depth-resolution dynamic range. , 2009, The Review of scientific instruments.

[59]  Pietro Burrascano,et al.  Galois sequences in the non-destructive evaluation of metallic materials , 2006 .

[60]  Giuseppe Silipigni,et al.  Optimization of the pulse-compression technique applied to the infrared thermography nondestructive evaluation , 2017 .

[61]  Fang-fang Shi,et al.  Research on the imaging of concrete defect based on the pulse compression technique , 2013, Applied Geophysics.

[62]  G. Tian,et al.  Surface Crack Detection for Carbon Fiber Reinforced Plastic (CFRP) Materials Using Pulsed Eddy Current Thermography , 2011, IEEE Sensors Journal.

[63]  Dongmei Zhang,et al.  Application of wavelet filtering and Barker-coded pulse compression hybrid method to air-coupled ultrasonic testing , 2014 .

[64]  P Burrascano,et al.  Comparative study between linear and non-linear frequency-modulated pulse-compression thermography. , 2018, Applied optics.

[65]  A. Ettemeyer,et al.  Composite structural integrity NDT with automatic shearography measurements , 2000 .

[66]  Darryl P Almond,et al.  A new technique to detect defect size and depth in composite structures using digital shearography and unconstrained optimization , 2012 .

[67]  R. Yen,et al.  Compression of femtosecond optical pulses , 1982 .

[68]  J. Kenny,et al.  Degradation behaviour of a composite material for thermal protection systems Part I–Experimental characterization , 1998 .

[69]  David A. Hutchins,et al.  Ultrasonic NDE of thick polyurethane flexible riser stiffener material , 2017 .

[70]  S. Tuli,et al.  Theory of frequency modulated thermal wave imaging for nondestructive subsurface defect detection , 2006 .

[71]  Christopher K. Davis,et al.  Shearographic and thermographic nondestructive evaluation of the space shuttle structure and thermal protection systems (TPS) , 1996, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[72]  Pietro Burrascano,et al.  Industrial applications: Ultrasonic inspection of large forgings , 2015 .

[73]  Peter Burgholzer,et al.  Thermodynamic Limits of Spatial Resolution in Active Thermography , 2015, International journal of thermophysics.

[74]  J. Kenny,et al.  An Armadillo‐Like Flexible Thermal Protection System for Inflatable Decelerators: A Novel Paradigm , 2014 .