Hybrid LC Filter Electrical Design Considerations

This paper continues the design considerations of a novel type of passive filter called hybrid LC filter (HLCF). The filter is aimed at significant reduction in high-frequency differential mode (DM) and common mode (CM) currents in speed-controlled ac drives. A model of the HLCF is presented. Based on the model, a transfer function of the HLCF is found. The HLCF behavior is analyzed in frequency domain. A method for HLCF frequency-domain behavior estimation with asymptotes is proposed. A comparison of the measured, simulated, and calculated results in frequency domain is presented.

[1]  SangCheol Lee,et al.  Overvoltage suppression filter design methods based on voltage reflection theory , 2004, IEEE Transactions on Power Electronics.

[2]  A. Binder,et al.  Techniques for Measurement of Parameters Related to Inverter-Induced Bearing Currents , 2007, IEEE Transactions on Industry Applications.

[3]  P. T. Finlayson.  Output filters for PWM drives with induction motors , 1997 .

[4]  A. Binder,et al.  Scaling Effects of Inverter-Induced Bearing Currents in AC Machines , 2008, IEEE Transactions on Industry Applications.

[5]  A. von Jouanne,et al.  Design considerations for an inverter output filter to mitigate the effects of long motor leads in ASD applications , 1997 .

[6]  Valentin Dzhankhotov,et al.  Hybrid LC Filter for Power Electronic Drives: Theory and Implementation , 2009 .

[7]  D.A. de Andrade,et al.  Methodology for Cable Modeling and Simulation for High-Frequency Phenomena Studies in PWM Motor Drives , 2008, IEEE Transactions on Power Electronics.

[8]  Prasad N. Enjeti,et al.  Analysis of Common-Mode Voltage in Utility-Interactive Fuel Cell Power Conditioners , 2009, IEEE Transactions on Industrial Electronics.

[9]  R.A. Lukaszewski,et al.  Universal Induction Motor Model With Low-to-High Frequency-Response Characteristics , 2006, IEEE Transactions on Industry Applications.

[10]  Prasad Enjeti,et al.  An improved inverter output filter configuration reduces common and differential modes dv/dt at the motor terminals in PWM drive systems , 1998 .

[11]  Thierry Lebey,et al.  Identification and Time-Domain Simulation of the Association Inverter–Cable–Asynchronous Machine Using Diffusive Representation , 2009, IEEE Transactions on Industrial Electronics.

[12]  Juha Pyrhonen,et al.  Air-cored common Mode filter with integrated capacitors , 2009, 2009 13th European Conference on Power Electronics and Applications.

[13]  Doyle F. Busse,et al.  Bearing currents and their relationship to PWM drives , 1995, Proceedings of IECON '95 - 21st Annual Conference on IEEE Industrial Electronics.

[14]  Kwanghee Nam,et al.  An overvoltage suppression scheme for AC motor drives using a half DC-link voltage level at each PWM transition , 2002, IEEE Trans. Ind. Electron..

[15]  Henry Shu-Hung Chung,et al.  A 31-level cascade inverter for power applications , 2002, IEEE Trans. Ind. Electron..

[16]  Annette Muetze,et al.  Calculation of Circulating Bearing Currents in Machines of Inverter-Based Drive Systems , 2004, IEEE Transactions on Industrial Electronics.

[17]  Fred C. Lee,et al.  Analysis and Applications of Parasitic Capacitance Cancellation Techniques for EMI Suppression , 2010, IEEE Transactions on Industrial Electronics.

[18]  Pertti Silventoinen,et al.  A New Passive Hybrid Air-Core Foil Filter for Modern Power Drives , 2011, IEEE Transactions on Industrial Electronics.

[19]  Annette Muetze,et al.  Practical Rules for Assessment of Inverter-Induced Bearing Currents in Inverter-Fed AC Motors up to 500 kW , 2007, IEEE Transactions on Industrial Electronics.

[20]  Dianguo Xu,et al.  A Novel Inverter-Output Passive Filter for Reducing Both Differential- and Common-Mode $dv/dt$ at the Motor Terminals in PWM Drive Systems , 2007, IEEE Transactions on Industrial Electronics.