Tensile testing of materials at high temperatures above 1700 °C with in situ synchrotron X-ray micro-tomography.
暂无分享,去创建一个
Robert O Ritchie | R. Ritchie | A. MacDowell | D. Marshall | B. Cox | H. Bale | A. Haboub | J. Nasiatka | Abdel Haboub | Brian N Cox | Hrishikesh A Bale | Alastair A MacDowell | James R Nasiatka | David B Marshall
[1] Brian N. Cox,et al. Stochastic Virtual Tests for High-Temperature Ceramic Matrix Composites , 2014 .
[2] A. A. MacDowell,et al. X-ray micro-tomography at the Advanced Light Source , 2012, Optics & Photonics - Optical Engineering + Applications.
[3] Kevin W Eliceiri,et al. NIH Image to ImageJ: 25 years of image analysis , 2012, Nature Methods.
[4] W. Ludwig,et al. In situ X-ray microtomography characterization of damage in SiCf/SiC minicomposites , 2011 .
[5] B. Kieback,et al. A 1800 K furnace designed for in situ synchrotron microtomography. , 2009, Journal of synchrotron radiation.
[6] A. Sakdinawat,et al. Nanoscale X-ray imaging , 2009 .
[7] Manuel Dierick,et al. Bronnikov-aided correction for x-ray computed tomography. , 2009, Journal of the Optical Society of America. A, Optics, image science, and vision.
[8] A. J. Moffat,et al. Micromechanisms of damage in 0° splits in a [90/0]s composite material using synchrotron radiation computed tomography , 2008 .
[9] I. Sinclair,et al. Ultra High Resolution Computed Tomography of Damage in Notched Carbon Fiber—Epoxy Composites , 2008 .
[10] David B. Marshall,et al. Integral Textile Ceramic Structures , 2008 .
[11] S. Stock. Recent advances in X-ray microtomography applied to materials , 2008 .
[12] Qingda Yang,et al. In Quest of Virtual Tests for Structural Composites , 2006, Science.
[13] Waltraud M. Kriven,et al. Quadrupole Lamp Furnace for High Temperature (up to 2050 K) Synchrotron Powder X-ray Diffraction Studies in Air in Reflection Geometry , 2006 .
[14] M Stampanoni,et al. Implementation of a fast method for high resolution phase contrast tomography. , 2006, Optics express.
[15] Frank Westferro,et al. High-pressure x-ray tomography microscope: Synchrotron computed microtomography at high pressure and temperature , 2005 .
[16] A. Gessler,et al. Ceramic Matrix Composites: A Challenge in Space‐Propulsion Technology Applications , 2005 .
[17] F. Rebillat,et al. Properties of Multilayered Interphases in SiC/SiC Chemical‐Vapor‐Infiltrated Composites with “Weak” and “Strong” Interfaces , 2005 .
[18] Manuel Dierick,et al. Octopus, a fast and user-friendly tomographic reconstruction package developed in LabView® , 2004 .
[19] J. H. Westbrook,et al. Ultrahigh-Temperature Materials for Jet Engines , 2003 .
[20] J. Baruchel,et al. A 1300 K furnace for in situ X‐ray microtomography , 2003 .
[21] T. Chou,et al. Fabrication and Characterization of Three‐Dimensional Carbon Fiber Reinforced Silicon Carbide and Silicon Nitride Composites , 1995 .
[22] D. Marshall,et al. Measurement of Interfacial Mechanical Properties in Fiber‐Reinforced Ceramic Composites , 1987 .
[23] A. Evans,et al. Failure Mechanisms in Ceramic‐Fiber/Ceramic‐Matrix Composites , 1985 .
[24] R. Ritchie,et al. Real-time Quantitative Imaging of Failure Events in Materials under Load at Temperatures above 1,600 , 2012 .
[25] Brian N. Cox,et al. Characterizing Three‐Dimensional Textile Ceramic Composites Using Synchrotron X‐Ray Micro‐Computed‐Tomography , 2012 .
[26] X. J. Fang,et al. Virtual Testing for Advanced Aerospace Composites: Advances and Future Needs , 2011 .
[27] Z. Hashin. PROPERTIES OF FIBER COMPOSITES WITH IMPERFECT INTERFACE , 2022 .