Grain size and scratching depth dependent tribological characteristics of CrCoNi medium-entropy alloy coatings: A molecular dynamics simulation study

[1]  T. Yang,et al.  Friction-induced rapid amorphization in a wear-resistant (CoCrNi)88Mo12 dual-phase medium-entropy alloy at cryogenic temperature , 2023, Composites Part B: Engineering.

[2]  Xiaohui Cui,et al.  Nano-tribological behavior of CuCoCrFeNi high-entropy alloys at cryogenic temperature: A molecular dynamics study , 2023, Journal of Applied Physics.

[3]  Haifeng Wang,et al.  Effect of a water film on the material removal behavior of Invar during chemical mechanical polishing , 2023, Applied Surface Science.

[4]  Haifeng Wang,et al.  Microstructure and tribological properties of in-situ carbide/CoCrFeNiMn high entropy alloy composites synthesized by flake powder metallurgy , 2023, Tribology International.

[5]  A. K. Tieu,et al.  Fabrication and Characterization of a Low-cost Co-free Al0.8CrFeNi2.2 Eutectic High Entropy Alloy Based Solid Self-lubricating Composite: Microstructure, Mechanical and Wear Properties , 2022, Journal of Alloys and Compounds.

[6]  R. Aghababaei,et al.  On the anisotropic scratching behavior of single crystalline copper at nanoscale , 2022, Tribology International.

[7]  K. Hua,et al.  Cryogenic wear behaviors of a metastable Ti-based bulk metallic glass composite , 2022, Journal of Materials Science & Technology.

[8]  T. Fang,et al.  Deformation and machining mechanism of nanocrystalline NiCoCrFe high entropy alloys , 2022, Journal of Alloys and Compounds.

[9]  A. K. Tieu,et al.  Tribological performance of a cost-effective CrFeNiAl0.3Ti0.3 high entropy alloy based self-lubricating composite in a wide temperature range , 2022, Tribology International.

[10]  Z. Gu,et al.  Optimizing transformation-induced plasticity in CoCrNi alloys by combined grain refinement and chemical tuning , 2022, Scripta Materialia.

[11]  P. Cao.  Maximum strength and dislocation patterning in multi–principal element alloys , 2022, Science advances.

[12]  Z. Gu,et al.  Temperature-dependent tensile properties of ultrafine-grained C-doped CoCrFeMnNi high-entropy alloy , 2022, Rare Metals.

[13]  R. Ritchie,et al.  Exceptional fracture toughness of CrCoNi-based medium- and high-entropy alloys at 20 kelvin , 2022, Science.

[14]  J. Zhang,et al.  An Atomic Insight into the Stoichiometry Effect on the Tribological Behaviors of Crconi Medium-Entropy Alloy , 2022, SSRN Electronic Journal.

[15]  Jinzhong Lu,et al.  Effects of crystallographic orientations and grain boundaries on nanoscratching behaviour of unique bi-crystal Cu , 2022, Wear.

[16]  R. Aghababaei,et al.  On the Effect of Adhesive Strength and Scratching Depth on Material Transfer During Nanoscale Scratching , 2022, Tribology Letters.

[17]  Junqin Shi,et al.  Molecular dynamics simulation of deformation mechanism of CoCrNi medium entropy alloy during nanoscratching , 2022, Computational Materials Science.

[18]  Zhihua Wang,et al.  Role of local chemical fluctuations in the shock dynamics of medium entropy alloy CoCrNi , 2021, Acta Materialia.

[19]  L. Dai,et al.  Anomalous size effect in micron-scale CoCrNi medium-entropy alloy wire , 2021, Scripta Materialia.

[20]  Junqin Shi,et al.  Atomistic insights into the deformation mechanism of a CoCrNi medium entropy alloy under nanoindentation , 2021, International Journal of Plasticity.

[21]  K. Pashkeev,et al.  A novel intermediate temperature self-lubricating CoCrCu1-xFeNix high entropy alloy fabricated by direct laser cladding , 2021 .

[22]  A. K. Tieu,et al.  Effects of oxidation on friction and wear properties of eutectic high-entropy alloy AlCoCrFeNi2.1 , 2021 .

[23]  S. Ringer,et al.  Deformation-induced crystalline-to-amorphous phase transformation in a CrMnFeCoNi high-entropy alloy , 2021, Science Advances.

[24]  Zhiping Xiong,et al.  Excellent combination of compressive strength and ductility of (CoCrFeNi) (Co0.26Cr0.07Fe0.16Ni0.31Hf0.4) high-entropy alloys , 2021 .

[25]  A. K. Tieu,et al.  Investigation into reciprocating dry sliding friction and wear properties of bulk CoCrFeNiMo high entropy alloys fabricated by spark plasma sintering and subsequent cold rolling processes: Role of Mo element concentration , 2020 .

[26]  T. Fang,et al.  Influences of grain size and temperature on tribological characteristics of CuAlNi alloys under nanoindentation and nanoscratch , 2020 .

[27]  I. Beyerlein,et al.  Effects of lattice distortion and chemical short-range order on the mechanisms of deformation in medium entropy alloy CoCrNi , 2020 .

[28]  T. Fang,et al.  Effects of grain and twin boundary on friction and contact characteristics of CuZrAl nanocrystallines , 2020 .

[29]  Y. Shibuta,et al.  Inverse Hall-Petch relationship of high-entropy alloy by atomistic simulation , 2020 .

[30]  L. Dai,et al.  Novel atomic-scale mechanism of incipient plasticity in a chemically complex CrCoNi medium-entropy alloy associated with inhomogeneity in local chemical environment , 2020, Acta Materialia.

[31]  Cheng Lu,et al.  The wrinkling and buckling of graphene induced by nanotwinned copper matrix: A molecular dynamics study , 2020 .

[32]  Jianbin Luo,et al.  A molecular dynamics study of lubricating mechanism of graphene nanoflakes embedded in Cu-based nanocomposite , 2020 .

[33]  F. Kennedy,et al.  A comparison of the dry sliding wear behavior of NiCoCr medium entropy alloy with 316 stainless steel , 2020 .

[34]  F. Ren,et al.  Sliding wear of CoCrNi medium-entropy alloy at elevated temperatures: Wear mechanism transition and subsurface microstructure evolution , 2019 .

[35]  Jingwei Yang,et al.  Molecular Dynamics Simulations of Atomic Diffusion during the Al–Cu Ultrasonic Welding Process , 2019, Materials.

[36]  H. Urbassek,et al.  Influence of tip adhesion on nanoindentation and scratching , 2019, Modelling and Simulation in Materials Science and Engineering.

[37]  R. Ritchie,et al.  Real-time nanoscale observation of deformation mechanisms in CrCoNi-based medium- to high-entropy alloys at cryogenic temperatures , 2019, Materials Today.

[38]  H. Sheng,et al.  Strengthening in multi-principal element alloys with local-chemical-order roughened dislocation pathways , 2019, Nature Communications.

[39]  Y. Shibuta,et al.  Interaction Between Nano-Voids and Migrating Grain Boundary by Molecular Dynamics Simulation , 2019, Acta Materialia.

[40]  Y. Tian,et al.  Fatigue behavior of CoCrFeMnNi high-entropy alloy under fully reversed cyclic deformation , 2019, Journal of Materials Science & Technology.

[41]  Y. Shibuta,et al.  Grain boundary induced deformation mechanisms in nanocrystalline Al by molecular dynamics simulation: From interatomic potential perspective , 2019, Computational Materials Science.

[42]  H. Bei,et al.  Local lattice distortion in NiCoCr, FeCoNiCr and FeCoNiCrMn concentrated alloys investigated by synchrotron X-ray diffraction , 2018, Materials & Design.

[43]  I. Karaman,et al.  On the mechanical response and microstructure evolution of NiCoCr single crystalline medium entropy alloys , 2018, Materials Research Letters.

[44]  F. Cao,et al.  Medium entropy alloy CoCrNi coatings: Enhancing hardness and damage-tolerance through a nanotwinned structuring , 2018 .

[45]  Y. H. Wang,et al.  Enhanced strength and ductility of bulk CoCrFeMnNi high entropy alloy having fully recrystallized ultrafine-grained structure , 2017 .

[46]  Peng Wang,et al.  Impacts of atomic scale lattice distortion on dislocation activity in high-entropy alloys , 2017 .

[47]  G. M. Stocks,et al.  Stacking fault energies of face-centered cubic concentrated solid solution alloys , 2017 .

[48]  P. Krakhmalev,et al.  Atomistic Insights on the Wear/Friction Behavior of Nanocrystalline Ferrite During Nanoscratching as Revealed by Molecular Dynamics , 2017, Tribology Letters.

[49]  E. George,et al.  Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi , 2017 .

[50]  Pierre Hirel,et al.  Atomsk: A tool for manipulating and converting atomic data files , 2015, Comput. Phys. Commun..

[51]  I. Szlufarska,et al.  How grain size controls friction and wear in nanocrystalline metals , 2015 .

[52]  H. Urbassek,et al.  Nanoscratching of iron: A molecular dynamics study of the influence of surface orientation and scratching direction , 2015 .

[53]  George M. Pharr,et al.  Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys , 2014 .

[54]  X. Liang,et al.  Effect of Nb addition on the structure and mechanical behaviors of CoCrCuFeNi high-entropy alloy coatings , 2014 .

[55]  Jing Shi,et al.  Nano-scale machining of polycrystalline coppers - effects of grain size and machining parameters , 2013, Nanoscale Research Letters.

[56]  Laurent Capolungo,et al.  Virtual diffraction analysis of Ni [0 1 0] symmetric tilt grain boundaries , 2013 .

[57]  S. Islam,et al.  Mechanism of Abrasive Wear in Nanomachining , 2011 .

[58]  K. Jacobsen,et al.  A Maximum in the Strength of Nanocrystalline Copper , 2003, Science.

[59]  T. Nieh,et al.  Hall–Petch breakdown manifested in abrasive wear resistance of nanocrystalline nickel , 2002 .

[60]  Steve Plimpton,et al.  Fast parallel algorithms for short-range molecular dynamics , 1993 .

[61]  H. Berendsen,et al.  Molecular dynamics with coupling to an external bath , 1984 .

[62]  David Tabor,et al.  Friction, lubrication and wear: a survey of work during the last decade , 1966 .

[63]  Junqin Shi,et al.  Molecular dynamics simulation of the tribological performance of amorphous/amorphous nano-laminates , 2022, Journal of Materials Science & Technology.

[64]  Xiancheng Zhang,et al.  Chemical short-range order strengthening mechanism in CoCrNi medium-entropy alloy under nanoindentation , 2022, Scripta Materialia.

[65]  Yiping Lu,et al.  A critical review of the mechanical properties of CoCrNi-based medium-entropy alloys , 2022, Microstructures.

[66]  Xiaozhou Liao,et al.  Ultra-strong and thermally stable nanocrystalline CrCoNi alloy , 2022, Journal of Materials Science & Technology.

[67]  A. Stukowski.  Modelling and Simulation in Materials Science and Engineering Visualization and analysis of atomistic simulation data with OVITO – the Open Visualization Tool , 2009 .