Investigating the effect of gravity on long pulsed laser drilling

Abstract With the aim of improving the efficiency of laser drilling, an upward drilling method is proposed. In the experiment, a long pulsed laser beam was arranged to propagate upwards, in the opposite direction to gravity, and was used to drill hole at the bottom of an aluminum slab. A semi-infinite axisymmetric model of this system was also established. The analytical solution for the hole shape was derived by assuming that material, once it melted, was removed from hole with the aid of gravity. The calculation results agreed well with the experimental results. For further verification of the effects of gravity, the removed molten material and the hole shape for the downward (along the gravity direction) and the upward drilling cases were compared experimentally. In addition, the relationships between gravity, the inertia force, the surface tension and the viscosity were discussed. The results show that more molten material is expelled with the assistance of the gravity, and the laser energy is used more efficiently to melt the aluminum slab in the upward drilling.

[1]  J. Jones,et al.  Melt ejection during laser drilling of metals , 2003 .

[2]  X. Ni,et al.  Axisymmetric numerical simulation of plastic damage in aluminum alloy induced by long pulsed laser , 2010 .

[3]  M. Allmen.  Laser-beam interactions with materials , 1987 .

[4]  B. Yilbas,et al.  Laser pulse heating and phase changes in the irradiated region: Temperature-dependent thermal properties case , 2009 .

[5]  Solidification of a two-dimensional high-Reynolds-number flow and its application to laser percussion drilling , 2007, European Journal of Applied Mathematics.

[6]  A. Matsunawa,et al.  The role of recoil pressure in energy balance during laser materials processing , 1997 .

[7]  A. Yarin,et al.  Spreading of an axisymmetric viscous drop due to gravity and capillarity on a dry horizontal wall , 2002 .

[8]  Lin Li,et al.  A Melt Depth Prediction Model for Quality Control of Laser Surface Glazing of Inhomogeneous Materials , 2001 .

[9]  Michael W.S. Lau,et al.  A technical review of the laser drilling of aerospace materials , 1994 .

[10]  C. Sutcliffe,et al.  Analysis of laser micro drilled holes through aluminium for micro-manufacturing applications , 2005 .

[11]  Claus Daniel,et al.  Computational approach to photonic drilling of silicon carbide , 2009 .

[12]  J. Jones,et al.  Time dependent ablation and liquid ejection processes during the laser drilling of metals , 2001 .

[13]  Lin Li,et al.  An analytical model for laser drilling incorporating effects of exothermic reaction, pulse width and hole geometry , 2006 .

[14]  Lin Li,et al.  The effects of process parameters on spatter deposition in laser percussion drilling , 2000 .

[15]  John Dowden,et al.  The theory of laser materials processing : heat and mass transfer in modern technology , 2009 .

[16]  Konstantinos Salonitis,et al.  A theoretical and experimental investigation on limitations of pulsed laser drilling , 2007 .

[17]  Jian Lu,et al.  Mathematical modeling of laser induced heating and melting in solids , 2001 .

[18]  M. Allmen,et al.  Evaporation and Plasma Formation , 1995 .

[19]  J. Mazumder,et al.  One‐dimensional steady‐state model for damage by vaporization and liquid expulsion due to laser‐material interaction , 1987 .

[20]  Aravinda Kar,et al.  Mathematical modeling of melting during laser materials processing , 1997 .

[21]  S. Na,et al.  Theoretical investigations on multiple-reflection and Rayleigh absorption–emission–scattering effects in laser drilling , 2010 .

[22]  Y. Yao,et al.  Gas Dynamic Effects on Laser Cut Quality , 2001 .

[23]  A. Kar,et al.  Two‐dimensional model for material damage due to melting and vaporization during laser irradiation , 1990 .