Dynamic model based cross-coupled control of parallel manipulators

The dynamic model based cross-coupled control is developed to improve the coordination motion relation between multiple kinematic chains in parallel manipulators. According to the mechanism characteristic of the parallel manipulators, two different types of synchronization error of the kinematic chains are defined in the joint space of active joints and in the task space of end-effector, respectively. By using the synchronization error, the cross-coupled control law in the task space is designed based on the dynamic model. The trajectory tracking experiments of an actual planar parallel manipulator are carried out, and then the control performances between the cross-coupled controller and the augmented PD (APD) controller are compared.

[1]  Jun Wu,et al.  Identification of Dynamic Parameter of a 3DOF Parallel Manipulator With Actuation Redundancy , 2008 .

[2]  Shuang Cong,et al.  Nonlinear computed torque control for a high-speed planar parallel manipulator , 2009 .

[3]  Andreas Müller,et al.  Consequences of Geometric Imperfections for the Control of Redundantly Actuated Parallel Manipulators , 2010, IEEE Transactions on Robotics.

[4]  Philippe Martinet,et al.  A Review on the Dynamic Control of Parallel Kinematic Machines: Theory and Experiments , 2009, Int. J. Robotics Res..

[5]  Lu Ren,et al.  Integration of saturated PI synchronous control and PD feedback for control of parallel manipulators , 2006, IEEE Transactions on Robotics.

[6]  C.M. Gosselin,et al.  Computationally Efficient Predictive Robot Control , 2007, IEEE/ASME Transactions on Mechatronics.

[7]  S. Cong,et al.  Nonlinear adaptive task space control for a 2-DOF redundantly actuated parallel manipulator , 2009 .

[8]  Bin Yao,et al.  Coordinated Adaptive Robust Contouring Controller Design for an Industrial Biaxial Precision Gantry , 2010, IEEE/ASME Transactions on Mechatronics.

[9]  S. Cong,et al.  Identification of dynamic and friction parameters of a parallel manipulator with actuation redundancy , 2010 .

[10]  Lu Ren,et al.  Synchronous Tracking Control of Parallel Manipulators Using Cross-coupling Approach , 2006, Int. J. Robotics Res..

[11]  Shuang Cong,et al.  Nonlinear friction compensation of a 2-DOF planar parallel manipulator , 2008 .

[12]  Pau-Lo Hsu,et al.  Estimation of the contouring error vector for the cross-coupled control design , 2002 .

[13]  Shuang Cong,et al.  Augmented Nonlinear PD Controller for a Redundantly Actuated Parallel Manipulator , 2009, Adv. Robotics.

[14]  V. Mata,et al.  Identification of dynamic parameters of a 3-DOF RPS parallel manipulator , 2008 .

[15]  Yoram Koren,et al.  Cross-Coupled Biaxial Computer Control for Manufacturing Systems , 1980 .

[16]  Etienne Burdet,et al.  Adaptive control of the Hexaglide, a 6 dof parallel manipulator , 1997, Proceedings of International Conference on Robotics and Automation.

[17]  Shuang Cong,et al.  Active Joint Synchronization Control for a 2-DOF Redundantly Actuated Parallel Manipulator , 2009, IEEE Trans. Control. Syst. Technol..

[18]  Jian Cao,et al.  Integrated Direct/Indirect Adaptive Robust Posture Trajectory Tracking Control of a Parallel Manipulator Driven by Pneumatic Muscles , 2009, IEEE Transactions on Control Systems Technology.