The identification of dynamic recrystallization and constitutive modeling during hot deformation of Ti55511 titanium alloy

[1]  T. Senthilvelan,et al.  Investigations on the hot workability characteristics and deformation mechanisms of aluminium alloy-Al2O3 nanocomposite , 2015 .

[2]  Houquan Liang,et al.  The integrated influence on hot deformation of dual-phase titanium alloys incorporating dynamic recrystallization evolution and α/β phase transformation , 2015 .

[3]  Y. Ning,et al.  Correlation between strain-rate sensitivity and dynamic softening behavior during hot processing , 2015 .

[4]  Y. Ning,et al.  Dynamic softening behavior of TC18 titanium alloy during hot deformation , 2015 .

[5]  Y. Ning,et al.  Dynamic recrystallization behavior of Ti–5Al–5Mo–5V–1Cr–1Fe alloy , 2014 .

[6]  Hongzhen Guo,et al.  The construction of constitutive model and identification of dynamic softening mechanism of high-temperature deformation of Ti–5Al–5Mo–5V–1Cr–1Fe alloy , 2014 .

[7]  Yang Wang,et al.  Tension behavior of Ti–6.6Al–3.3Mo–1.8Zr–0.29Si alloy over a wide range of strain rates , 2014 .

[8]  Zhi-feng Shi,et al.  Study on the hot deformation behavior of TC4-DT alloy with equiaxed α+β starting structure based on processing map , 2014 .

[9]  Y. Lin,et al.  Dynamic recrystallization behavior of a typical nickel-based superalloy during hot deformation , 2014 .

[10]  M. Jahazi,et al.  Microstructure evolution at the onset of discontinuous dynamic recrystallization: A physics-based model of subgrain critical size , 2014 .

[11]  Wei Yan,et al.  Hot deformation characteristics of a nitride strengthened martensitic heat resistant steel , 2014 .

[12]  Lars-Erik Lindgren,et al.  Dislocation density based model for plastic deformation and globularization of Ti-6Al-4V , 2013 .

[13]  D. Fabrègue,et al.  Modeling Grain Boundary Motion and Dynamic Recrystallization in Pure Metals , 2013, Metallurgical and Materials Transactions A.

[14]  B. Tang,et al.  Characterization of hot deformation behavior of a new near beta titanium alloy: Ti-7333 , 2013 .

[15]  Y. Lin,et al.  A critical review of experimental results and constitutive descriptions for metals and alloys in hot working , 2011 .

[16]  Imre Felde,et al.  Handbook of thermal process modeling of steels , 2009 .

[17]  Wei Sha,et al.  Titanium Alloys: Modelling of Microstructure, Properties and Applications , 2009 .

[18]  J. Jonas,et al.  The Avrami kinetics of dynamic recrystallization , 2009 .

[19]  R. Turk,et al.  Modeling the dynamic recrystallization under multi-stage hot deformation , 2004 .

[20]  O. Balancin,et al.  Effect of competing hardening and softening mechanisms on the flow stress curve modeling of ultra-low carbon steel at high temperatures , 2003 .

[21]  W. Sha.  Determination of activation energy of phase transformation and recrystallization using a modified kissinger method , 2001 .

[22]  G. Gottstein,et al.  Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK60 , 2001 .

[23]  W. G. Frazier,et al.  Hot deformation mechanisms in ELI Grade Ti-6a1-4V , 1999 .

[24]  Jung-Min Kim,et al.  Microstructural analysis on boundary sliding and its accommodation mode during superplastic deformation of Ti–6Al–4V alloy , 1999 .

[25]  Y. V. R. K. Prasad,et al.  Processing maps for hot working of titanium alloys , 1998 .

[26]  John J. Jonas,et al.  A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization , 1996 .

[27]  J. Klepaczko.  Physical-state variables - the key to constitutive modeling in dynamic plasticity , 1991 .

[28]  S. M. Doraivelu,et al.  Modeling of dynamic material behavior in hot deformation: Forging of Ti-6242 , 1984 .

[29]  M. Ashby,et al.  Deformation maps for titanium and zirconium , 1982 .

[30]  U. F. Kocks,et al.  Kinetics of flow and strain-hardening☆ , 1981 .

[31]  D. G. Bourgin.  Cones and Vietoris-Begle type theorems , 1972 .

[32]  Y. P. Varshni.  Temperature Dependence of the Elastic Constants , 1970 .