Development of a simple cup method for water vapor transmission rate measurements under high-temperature conditions

A novel method has been studied to measure high-temperature water vapor transmission rates (WVTRs) for sealing materials such as epoxy encapsulants. Sealing materials are widely used as electronic components and must be moisture resistant under the damp heat test conditions for electronic components, e.g., 60 °C and 85 °C. To prevent samples from damage during high-temperature measurements using the conventional cup method, we built a new cup unit with a pressure-adjusting mechanism. This new cup is used to measure WVTRs without damaging the thin epoxy encapsulant membranes (thicknesses of 120-220 μm). Arrhenius plots of the WVTRs for epoxy encapsulants measured by using the new cup exhibit linear relationships between temperatures of 25-85 °C.

[1]  P. Doty,et al.  Temperature Dependence of Water Vapor Permeability , 1946 .

[2]  John Crank,et al.  Diffusion in polymers , 1968 .

[3]  Paul Calvert,et al.  Diffusion in polymers , 1977, Nature.

[4]  M. Kempe.  Modeling of rates of moisture ingress into photovoltaic modules , 2006 .

[5]  Determination of moisture ingress rate through photovoltaic encapsulants , 2013, 2013 IEEE 39th Photovoltaic Specialists Conference (PVSC).

[6]  C. Hsueh,et al.  Water cooking for backsheet and PV module endurance evaluation , 2014, 2014 IEEE 40th Photovoltaic Specialist Conference (PVSC).

[7]  L. Blunt,et al.  Defect detection in thin-film photovoltaics; Towards improved efficiency and longevity , 2014, 2014 5th International Renewable Energy Congress (IREC).

[8]  Thomas Stieglitz,et al.  Non-hermetic encapsulation for implantable electronic devices based on epoxy , 2015, 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

[9]  Dylan L. Nobles,et al.  Evaluation of the durability of flexible barrier materials , 2015, 2015 IEEE 42nd Photovoltaic Specialist Conference (PVSC).

[10]  C. Sato,et al.  A novel cup with a pressure-adjusting mechanism for high-temperature water vapor transmission rate measurements , 2016 .