Top-hat beam output of a single-mode microstructured optical fiber: impact of core index depression.

A new strategy to obtain a single-mode fiber with a flattened intensity profile distribution is presented. It is based on the use of an OVD-made high index ring deposited on a silica rod having a refractive index slightly lower than the silica used for the microstructured cladding. Using this strategy, we realized the first single-mode fiber with a quasi-perfect top-hat intensity profile around 1 µm. Numerical studies clearly demonstrate the advantage of using a core index depression to insure the single-mode operation of the fiber at the working wavelength.

[1]  J W Nicholson,et al.  Spatially and spectrally resolved imaging of modal content in large-mode-area fibers. , 2008, Optics express.

[2]  David J. Richardson,et al.  High power fiber lasers: current status and future perspectives [Invited] , 2010 .

[3]  James A. West,et al.  Photonic crystal fibers , 2001, Proceedings 27th European Conference on Optical Communication (Cat. No.01TH8551).

[4]  A Katzir,et al.  Silver-halide fiber tip as a beam homogenizer for infrared hollow waveguides. , 1997, Optics letters.

[5]  Andrew S. Webb,et al.  Fiber design for high-power fiber lasers , 2009, LASE.

[6]  Fan Zhang,et al.  Single-mode operations in the large flattened mode optical fiber lasers and amplifiers , 2009 .

[7]  Raymond J. Beach,et al.  Large flattened mode optical fiber for high output energy pulsed fiber lasers , 2003, Conference on Lasers and Electro-Optics, 2003. CLEO '03..

[8]  Arnaud Mussot,et al.  Top-hat beam output from a large mode area microstructured fiber for beam delivery , 2012, Photonics Europe.

[9]  D. Bird,et al.  Adaptive curvilinear coordinates in a plane-wave solution of Maxwell’s equations in photonic crystals , 2005 .

[10]  P. Russell,et al.  Photonic Crystal Fibers , 2003, Science.

[11]  Anatoly P. Napartovich,et al.  Modeling of large flattened mode area fiber lasers , 2010 .

[12]  Mitsunobu Miyagi,et al.  Beam homogenizer for hollow-fiber delivery system of excimer laser light. , 2003, Applied optics.

[13]  J. C. Flanagan,et al.  Square core jacketed air-clad fiber. , 2006 .

[14]  Ajoy Ghatak,et al.  Design of a waveguide refractive index profile to obtain a flat modal field , 1999, Other Conferences.

[15]  Sébastien Guenneau,et al.  On the use of PML for the computation of leaky modes , 2008 .

[16]  R. Allott,et al.  Square core jacketed air-clad fiber , 2006, 2006 Optical Fiber Communication Conference and the National Fiber Optic Engineers Conference.

[17]  Kunimasa Saitoh,et al.  Endlessly single-mode holey fibers: the influence of core design. , 2005, Optics express.

[18]  F Hanawa,et al.  Influences of the drawing conditions on optical characteristics in undoped-silica-core single-mode fibers. , 1987, Optics letters.

[19]  J. Limpert,et al.  High-power rod-type photonic crystal fiber laser. , 2005, Optics express.

[20]  Dianyuan Fan,et al.  Design guidelines and characteristics of beam-shaping microstructure optical fibers , 2006 .

[21]  Duc Minh Nguyen,et al.  Scalar product technique in modal decomposition for multimode fibers , 2010, Photonics Europe.

[22]  A. Dubrouil,et al.  Spatial shaping of intense femtosecond beams for the generation of high-energy attosecond pulses , 2012 .

[23]  Arnaud Mussot,et al.  High-energy temporally shaped nanosecond-pulse master-oscillator power amplifier based on ytterbium-doped single-mode microstructured flexible fiber. , 2011, Optics letters.

[24]  Arnaud Mussot,et al.  Flattened fundamental mode in microstructured fibers: design, realization and characterization , 2012, Other Conferences.

[25]  Fan Zhang,et al.  Photonic crystal fiber with a flattened fundamental mode for the fiber lasers , 2009 .

[26]  Stephen A. Payne,et al.  Large flattened-mode optical fiber for reduction of nonlinear effects in optical fiber lasers , 2004, SPIE LASE.