KINE3D: a New 3d Restoration Method Based on a Mixed Approach Linking Geometry and Geomechanics

We developed a new methodology for 3D restoration by coupling a geometric modelling software and a mechanical finite-element code. This method allows the geologist to impose the displacement on the main faults in order to get an adequate restored geometry and to compute the 3D strain and stress fields within the main blocks based on the unfolding with the mechanical approach. Complex meshing of the solid take into account heterogeneities due to the layering and facies variation. Results are discussed on compressive and extensional contexts, as well as in backward and forward approaches. The compressive case is illustrated by the restoration of a faulted anticline with massive sand and shaly beds. This case has been also restored with 2D surface unfolding processes and we will compare the information that geologists may get from the various methods. The second case concerns the deformation, in a gravity gliding context, of a sandy channel embedded into a shaly matrix. The mixed approach allows to quantify the reorientation of the stress field on the sand/shale boundary.

[1]  I. Moretti,et al.  Sedimentary flattening and multi-extensional deformation along the West African margin , 2003 .

[2]  A. Poliakov,et al.  Erosion and rheology controls on synrift and postrift evolution: Verifying old and new ideas using a fully coupled numerical model , 2001 .

[3]  Jean-Marc Vézien,et al.  Piecewise surface flattening for non-distorted texture mapping , 1991, SIGGRAPH.

[4]  I. Moretti,et al.  Hydrocarbon generation in relation to thrusting in the Sub Andean zone from 18 to 22 degrees S, Bolivia , 1996, Petroleum Geoscience.

[5]  Renaud Bouroullec,et al.  Kinematics of a growth fault/raft system on the West African margin using 3-D restoration , 2002 .

[6]  I.,et al.  Hydrocarbon generation in relation to thrusting in the Sub Andean Zone from 18 to 22 " S , Bolivia , 2002 .

[7]  M. Antonellini,et al.  Fault and fracture systems in a fold and thrust belt: An example from Bolivia , 2005 .

[8]  J. Suppe,et al.  Geometry and kinematics of fault-bend folding , 1983 .

[9]  Thomas Kohl,et al.  Geothermal resource mapping—example from northern Switzerland , 2003 .

[10]  Chakib Bennis,et al.  Construction of coherent 3D geological blocks , 2003 .

[11]  M. Rowan,et al.  Cross Section Restoration and Balancing as Aid to Seismic Interpretation in Extensional Terranes , 1989 .

[12]  James Jackson,et al.  The relationship between the geometry of normal faults and that of the sedimentary layers in their hanging walls , 1986 .

[13]  M. Jackson,et al.  Raft tectonics in the Kwanza Basin, Angola* , 1992 .

[14]  F. Lepage.  Unstructured 3D Gridding and Upscaling for Coarse Modeling of Geometrically Complex , 2004 .

[15]  J. Mallet,et al.  Building and Editing a Sealed Geological Model , 2004 .

[16]  I. Moretti,et al.  LOCACE: Computer-aided construction of balanced geological cross sections , 1989 .

[17]  I. Moretti,et al.  Compartmentalisation of fluid migration pathways in the sub-Andean Zone, Bolivia , 2002 .

[18]  Yves M. Leroy,et al.  Activation of diffuse discontinuities and folding of sedimentary layers , 2003 .

[19]  J. Suppe,et al.  3-D Restoration of Complexly Folded and Faulted Surfaces Using Multiple Unfolding Mechanisms , 2000 .

[20]  A. Poliakov,et al.  Initiation of salt diapirs with frictional overburdens: numerical experiments , 1993 .

[21]  L. Maerten,et al.  Syn-sedimentary shear zones , 2003, Petroleum Geoscience.

[22]  J. Gratier,et al.  Compatibility constraints on folded and faulted strata and calculation of total displacement using computational restoration (UNFOLD program) , 1993 .