PZT thin film pressure sensor for on-line monitoring injection molding

In this paper, a new fabrication process for lead zirconate titanate (PbZrTiO/sub 3/, PZT) micro pressure sensor is presented. The PZT pressure sensor can be applied to on-line monitoring of the pressure in the mold's core and cavity during the injection process. This PZT piezoelectric thin film sensor is deposited on the surface of steel wafer at 300/spl deg/C by RF sputtering process and is micro fabricated directly. The composition of the steel wafer is similar to the injection mold used in most injection machines. After the sputter deposition, rapid or slow thermal annealing treatment is proceeded at 650/spl deg/C. Rapid thermal annealing will attain better ferroelectric property and better perovskite crystal structure of PZT thin films. However, rapid thermal annealing can cause film cracks. This research developed multilayer PZT thin film techniques, which can reduce the effect of film cracks. The properties of the proposed PZT thin film pressure sensor are: the remnant polarization (P/sub r/), coercive field (E/sub c/), and relative dielectric constant (/spl epsi//sub s/) of the PZT films are 10.41 C/cm/sup 2/, 79.2 kV/cm and 1535, respectively; the piezoelectric constant d/sub 33/ and d/sub 31/ are estimated to be 129.9 pc/N and -48.03 pc/N, respectively.

[1]  P. Chung,et al.  RF sputtered PLZT thin film on Pt/Ti electrode , 1997, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[2]  L. Madsen,et al.  Examination of barrier layers for lead zirconate titanate thin films , 1992 .

[3]  K. Iijima,et al.  Preparation of ferroelectric BaTiO3 thin films by activated reactive evaporation , 1990 .

[4]  S. Orzechowski,et al.  A process monitoring and control system for injection molding using nozzle-based pressure and temperature sensors , 1998 .

[5]  I. K. Naik,et al.  Observations of ferroelectric polarization reversal in sol‐gel processed very thin lead‐zirconate‐titanate films , 1990 .

[6]  R. Vest.  Metallo-organic decomposition (MOD) processing of ferroelectric and electro-optic films : a review , 1990 .

[7]  Piezoelectric films in silicon-based microactuation structures , 1995 .

[8]  Wei-Yean Howng,et al.  Ferroelectric lead zirconate titanate thin films by radio frequency magnetron sputtering , 1992 .

[9]  D. Uhlmann,et al.  Fatigue and retention behaviors of Pt-PZT-metal capacitors with various top metallizations , 1994, Proceedings of 1994 IEEE International Symposium on Applications of Ferroelectrics.

[10]  J. Dininger.  Three critical measurements on injection molding processes , 1994, Proceedings of IEEE Technical Conference on Rubber and Plastics Industry.

[11]  Michael L. Reed,et al.  RF-magnetron sputtering of piezoelectric lead-zirconate-titanate actuator films using composite targets , 1994, Proceedings IEEE Micro Electro Mechanical Systems An Investigation of Micro Structures, Sensors, Actuators, Machines and Robotic Systems.