The status of metal-matrix composite research and development in Japan
暂无分享,去创建一个
[1] T. Hasegawa,et al. Microstructural Studies on Tensile Fracture of an Aligned Al–Al3Ni Eutectic Composite , 1988 .
[2] Toshiro Kobayashi,et al. Micromechanical fracture process of SiC-particle-reinforced aluminium alloy 6061-T6 metal matrix composites , 1992 .
[3] Y. Shida,et al. Development of New Wear Resistant Carbide Dispersed Titanium Based Composite and Its Application to Automobile Parts , 1990 .
[4] T. Kawai,et al. Recent Developments in Functionally Gradient Materials , 1992 .
[5] K. Osamura,et al. Stress concentration at a notch tip in unidirectional metal matrix composites , 1991 .
[6] Y. Tsunekawa,et al. Flame-spraying fabrication of silicon carbide whisker-reinforced aluminium , 1987 .
[7] Y. Kagawa,et al. Some mechanical properties of carbon fibre-reinforced magnesium-matrix composite fabricated by squeeze casting , 1992 .
[8] H. Fukunaga,et al. Reactivity of Potassium Titanate Whiskers with Al Alloys , 1992 .
[9] Y. Kagawa,et al. Strength and Failure Process of Continuous Fiber-reinforced Metals , 1989 .
[10] M. Taya,et al. Effects of Thermal Cycling on Properties of Carbon Fiber/Aluminum Composites , 1988 .
[11] M. Shimbo,et al. Wettability of silicon carbide by aluminium, copper and silver , 1987 .
[12] H. Morimoto,et al. Effects of HIP Consolidating Temperature on the Mechanical Properties of SiC Whisker Reinforced Aluminum Alloy Composites , 1989 .
[13] Donomoto Tadashi,et al. CERAMIC FIBER REINFORCED PISTON FOR HIGH PERFORMANCE DIESEL ENGINES , 1983 .
[14] A. Okada,et al. AE Signals and Fracture in SiC-Fiber Reinforced Aluminum after Applying Cyclic Deformation , 1990 .
[15] Lawrence M. Seiford,et al. Recent developments in dea : the mathematical programming approach to frontier analysis , 1990 .
[16] M. Nakahashi,et al. Diffusion-preventive Al2O3 layer growth at the interface of plasma-sprayed niobium and FeCrAlY in a tungsten fibre-reinforced high-temperature superalloy composite , 1991 .
[17] Wettability of MgO single crystal by liquid pure Pb, Sn and Bi , 1992 .
[18] B. Cullity,et al. URANIUM--SILICON ALLOYS , 1957 .
[19] V. Michaud,et al. Pressure-infiltration processing of reinforced aluminum , 1993 .
[20] H. Fujii,et al. A New Approach to Estimating Wetting in a Reaction System , 1990 .
[21] T. Yano,et al. Influence of Inter-Fiber Spacing on the Yield Stress of Al–Al 3 Ni Eutectic Composites , 1988 .
[22] S. Ochiai,et al. Influences of matrix ductility, interfacial bonding strength, and fiber volume fraction on tensile strength of unidirectional metal matrix composite , 1990 .
[23] A. Kohyama,et al. Development of Advanced SiC/Al Composite Materials Through Microstructural Evaluation and Design , 1989 .
[24] Yoshihisa Tanaka,et al. Fatigue properties and fatigue fracture mechanisms of SiC whiskers or SiC particulate-reinforced aluminium composites , 1992 .
[25] M. Taya,et al. Stress relaxation by dislocation punching to radial direction from a long fiber in a composite , 1992 .
[26] M. Sugamata,et al. Effect of Hot Extrusion on the Mechanical Properties of SiC Whisker/AZ91 Magnesium Alloy Composites , 1991 .
[27] H. Tsukamoto,et al. Mean-field micromechanics model and its application to the analysis of thermomechanical behaviour of composite materials , 1991 .
[28] M. Mabuchi,et al. Very high strain-rate superplasticity in a particulate Si3N4/6061 aluminum composite , 1991 .
[29] K. Ichikawa,et al. Production and Properties of Carbide Dispersion-strengthened Coppers by Compocasting , 1989 .
[30] K. Mukai,et al. Effects of Oxygen and Temperature on the Surface Tension of Liquid Iron and Its Wettability of Alumina , 1991 .
[31] Tadayoshi Hayashi,et al. Production Process of Metal Matrix Composite (MMC) Engine Block , 1991 .
[32] R. Watanabe,et al. Elastic Constants of Zirconia/Stainless Steel Sintered Composite Materials Measured by a Line-Focus-Beam Acoustic Microscope , 1992 .
[33] Tohru Takahashi,et al. STRENGTHENING MECHANISMS IN ALUMINUM-CERAMIC PARTICLE COMPOSITE ALLOYS PRODUCED BY MECHANICAL ALLOYING , 1992 .
[34] T. Kurauchi,et al. Detection of microcracking in manufacturing continuous fibre-reinforced aluminium composites by acoustic emission measurement , 1992 .
[35] Tadayoshi Hayashi,et al. The Properties of Hybrid Fiber Reinforced Metal and It's Application for Engine Block , 1989 .
[36] T. Nakatsuka,et al. Surface Modification of Aluminum-Boron Double Oxide Whisker and Its Effects on Whisker/Aluminum or Whisker/Thermoplastic Composite , 1990 .
[37] Y. Imai,et al. Thermal Stability of NiCrAIY/PSZ FGM by Plasma Twin Torches Method. , 1992 .
[38] K. Goda,et al. Considerations of the reliability of tensile strength at elevated temperature of unidirectional metal matrix composites , 1989 .
[39] K. Akutagawa,et al. Reduction of the Friction Coefficient of Metal Matrix Composite Under Dry Conditions , 1987 .
[40] M. Kobashi,et al. Effects of alloying elements on SiC dispersion in liquid aluminum , 1990 .
[41] K. Niihara,et al. Aluminium composites reinforced with a new aluminium borate whisker , 1990 .
[42] H. G. Suzuki,et al. MECHANICAL PROPERTIES OF PARTICULATE REINFORCED TITANIUM-BASED METAL MATRIX COMPOSITES PRODUCED BY THE BLENDED ELEMENTAL P/M ROUTE , 1992 .
[43] Y. Tsunekawa,et al. Centrifugally cast aluminium matrix composites containing segregated alumina fibres , 1988 .
[44] M. K. Premkumar,et al. Aluminum composite materials for multichip modules , 1992 .
[45] A. Sakamoto,et al. Current status of R&D in Japan on materials for space planes , 1991 .
[46] I. W. Hall. The interface in carbon-magnesium composites: fibre and matrix effects , 1991 .
[47] M Kubo,et al. Development of new fiber reinforced aluminum alloy for high performance diesel engine pistons , 1988 .
[48] M. Mabuchi,et al. Experimental investigation of superplastic behavior in a 20 vol% aluminum composite , 1992 .
[49] T. Suganuma,et al. Application of Metal Matrix Composites to Diesel Engine Pistons , 1989 .
[50] H. Fukunaga,et al. Preparation of intermetallic compound matrix composites by reaction squeeze casting , 1991 .