Microbioreactors with microfluidic control and a user-friendly connection to the actuator hardware

In this study, an array of microbioreactors based on the format of 48-well microtiter plates (MTPs) is presented. The process parameters pH and biomass are monitored online using commercially available optical sensor technology. A microfluidic device dispenses acid or base individually into each well for controlling the pH of fermentations. Fluid volumes from 72 nL to 940 nL can be supplied with valve opening times between 10 ms and 200 ms. One microfluidic device is capable of supplying four wells from two reservoirs. Up to four microfluidic devices can be integrated on the area of a prototype MTP. The devices are fabricated in polydimethylsiloxane (PDMS) using soft lithographic techniques and utilize pneumatically actuated microvalves. During fermentations, the microbioreactor is clamped to an orbital shaker and a temporary pneumatic connection guides the externally controlled pressurized air to the microfluidic device. Finally, fermentations of Escherichia coli in the presence and absence of pH control are carried out in the microbioreactor system over 18 h. During the fermentation the pH of the cultures is continuously monitored by means of optodes. An ammonia solution or phosphoric acid is dispensed to adjust the pH if it differs from the set point of 7.2. In a controlled culture, the pH can be sustained within 7.0 to 7.3 while the pH in an uncontrolled culture ranges between 6.5 and 9.0. This microbioreactor demonstrates the possibility of pH-controlled fermentations in micro-scale. The process control and the user friendly connection to the actuation hardware provide an easy handling comparable to standard MTPs.

[1]  S. Quake,et al.  Monolithic microfabricated valves and pumps by multilayer soft lithography. , 2000, Science.

[2]  Yordan Kostov,et al.  Design and performance of a 24‐station high throughput microbioreactor , 2006, Biotechnology and bioengineering.

[3]  Norbert Gerbsch,et al.  A novel fiber optic probe for on-line monitoring of biomass concentrations , 2000 .

[4]  J Büchs,et al.  Quasi-continuous combined scattered light and fluorescence measurements: a novel measurement technique for shaken microtiter plates. , 2005, Biotechnology and bioengineering.

[5]  Dirk Weuster-Botz,et al.  Miniature bioreactors for automated high‐throughput bioprocess design (HTBD): reproducibility of parallel fed‐batch cultivations with Escherichia coli , 2005, Biotechnology and applied biochemistry.

[6]  Ryutaro Maeda,et al.  A pneumatically-actuated three-way microvalve fabricated with polydimethylsiloxane using the membrane transfer technique , 2000 .

[7]  Yinjie J. Tang,et al.  Evaluation of the effects of various culture conditions on Cr(VI) reduction by Shewanella oneidensis MR‐1 in a novel high‐throughput mini‐bioreactor , 2006, Biotechnology and bioengineering.

[8]  Juan G. Santiago,et al.  A review of micropumps , 2004 .

[9]  Hartmut F. Zimmermann,et al.  Evaluation of the applicability of backscattered light measurements to the determination of microbial cell densities in microtiter plates , 2006, Analytical and bioanalytical chemistry.

[10]  C. W. Hancher,et al.  A fiber‐optic retroreflective turbidimeter for continuously monitoring cell concentration during fermentation , 1974, Biotechnology and bioengineering.

[11]  G. Whitesides,et al.  Solvent compatibility of poly(dimethylsiloxane)-based microfluidic devices. , 2003, Analytical chemistry.

[12]  I Klimant,et al.  Optical sensor for seawater salinity , 2000, Fresenius' journal of analytical chemistry.

[13]  J. Büchs,et al.  Effect of Oxygen Limitation and Medium Composition on Escherichia coli Fermentation in Shake‐Flask Cultures , 2004, Biotechnology progress.

[14]  On-chip microcultivation chamber for swimming cells using visualized poly(dimethylsiloxane) valves , 2003 .

[15]  Frank Kensy,et al.  Oxygen transfer phenomena in 48-well microtiter plates: determination by optical monitoring of sulfite oxidation and verification by real-time measurement during microbial growth. , 2005, Biotechnology and bioengineering.