Characterization of membrane fouling distribution in a spiral wound module using high-frequency ultrasound image analysis

Abstract The fouling phenomenon in spiral wound membrane modules was investigated using ultrasonic time domain reflectometry (UTDR) and computational fluid dynamic (CFD) simulations. This study utilized a high-frequency 50-MHz ultrasound system to measure the fouling distribution in the spiral wound ultrafiltration and reserve osmosis membrane modules. The results show that for a porous membrane, the voltage decreases as the fouling increases while the opposite is true for a dense membrane. The effects of gravity and module orientation on fouling were also investigated. It is clear from the results that gravity and membrane curvature play a role in the deposition of foulants on the membrane surface. This finding is supported by CFD simulations revealing that the inner membrane experiences higher axial velocities as the fluid flows through the spacers, thus generating a higher wall shear stress in the interior, which can aid in reducing membrane fouling. This study demonstrated that UTDR with a high-frequency transducer can be used to analyze the fouling phenomenon in spiral wound membrane modules.

[1]  Kuo-Lun Tung,et al.  Analysis of particle fouling during microfiltration by use of blocking models , 2007 .

[2]  R. Sanderson,et al.  Measurement and modelling of organic fouling deposition in ultrafiltration by ultrasonic transfer signals and reflections , 2002 .

[3]  Distribution and deposition of organic fouling on the microfiltration membrane evaluated by high-frequency ultrasound. , 2013, Journal of membrane science.

[4]  J. C. Schippers,et al.  The modified fouling index, a method of determining the fouling characteristics of water , 1980 .

[5]  R. Wakeman,et al.  Colloidal fouling of microfiltration membranes during the treatment of aqueous feed streams , 1991 .

[6]  W. Krantz,et al.  Ultrasound, gravimetric, and SEM studies of inorganic fouling in spiral-wound membrane modules , 2007 .

[7]  Jianxin Li,et al.  In situ monitoring of membrane fouling in spiral-wound RO modules by UTDR with a sound intensity modeling , 2011 .

[8]  R. Sanderson,et al.  Development of an ultrasonic technique for in situ investigating the properties of deposited protein during crossflow ultrafiltration. , 2005, Journal of colloid and interface science.

[9]  Tao Yang,et al.  Quantitative study of the effect of electromagnetic field on scale deposition on nanofiltration membranes via UTDR. , 2007, Water research.

[10]  Y. Cai,et al.  Non-invasive monitoring of fouling in hollow fiber membrane via UTDR , 2009 .

[11]  Antonio Hernández,et al.  Steps of membrane blocking in flux decline during protein microfiltration , 1995 .

[12]  S. Chae,et al.  Fouling characteristics of pressurized and submerged PVDF (polyvinylidene fluoride) microfiltration membranes in a pilot-scale drinking water treatment system under low and high turbidity conditions. , 2009 .

[13]  A new view of membrane fouling with 3D ultrasonic imaging techniques: Taking the canola oil with pho , 2011 .

[14]  Kuo-Lun Tung,et al.  The effect of curvature of a spacer-filled channel on fluid flow in spiral-wound membrane modules , 2008 .

[15]  E. P. Jacobs,et al.  Non-invasive visualization of the fouling of microfiltration membranes by ultrasonic time-domain reflectometry , 2002 .

[16]  Mark Hernandez,et al.  Use of Ultrasonic Sensors for Characterization of Membrane Fouling and Cleaning , 2008 .

[17]  R. D. Sanderson,et al.  A focused ultrasonic sensor for in situ detection of protein fouling on tubular ultrafiltration membranes , 2006 .

[18]  Zhanfeng Cui,et al.  In situ 3D characterization of membrane fouling by yeast suspensions using two-photon femtosecond near infrared non-linear optical imaging , 2006 .

[19]  Mark Hernandez,et al.  Monitoring Protein Fouling on Polymeric Membranes Using Ultrasonic Frequency-Domain Reflectometry , 2011, Membranes.

[20]  Anthony G. Fane,et al.  Fouling transients in nominally sub-critical flux operation of a membrane bioreactor , 2002 .

[21]  Jianxin Li,et al.  Non-invasive measurement of membrane scaling and cleaning in spiral-wound reverse osmosis modules by ultrasonic time-domain reflectometry with sound intensity calculation , 2011 .

[22]  Mark Hernandez,et al.  Biofouling potential of industrial fermentation broth components during microfiltration , 2010 .

[23]  Rolf Gimbel,et al.  A comparative study of fouling-index and fouling-potential of waters to be treated by reverse osmosis , 1990 .

[24]  R. Sanderson,et al.  Interpretation of calcium sulfate deposition on reverse osmosis membranes using ultrasonic measurements and a simplified model , 2005 .

[25]  R. Sanderson,et al.  Cake-layer deposition, growth, and compressibility during microfiltration measured and modeled using a noninvasive ultrasonic technique , 2002 .

[26]  K. Tung,et al.  Online monitoring of particle fouling in a submerged membrane filtration system using a photointerrupt sensor array , 2012 .

[27]  William B. Krantz,et al.  Investigation of membrane fouling and cleaning using ultrasonic time-domain reflectometry , 2000 .

[28]  Kuo-Lun Tung,et al.  CFD simulation of fluid flow through spacer-filled membrane module : selecting suitable cell types for periodic boundary conditions , 2008 .

[29]  Mark Hernandez,et al.  Ultrasonic monitoring of early-stage biofilm growth on polymeric surfaces. , 2007, Journal of microbiological methods.

[30]  William B. Krantz,et al.  Real-time measurement of inorganic fouling of RO desalination membranes using ultrasonic time-domain reflectometry , 1999 .

[31]  C. Cabassud,et al.  An optical method for in situ characterization of fouling during filtration , 2007 .

[32]  Kuo-Lun Tung,et al.  Analysis and prediction of fouling layer structure in microfiltration , 2008 .