Future structural stability design for composite space and airframe structures

Abstract Space and aircraft industry demands for reduced development and operating costs. Structural weight reduction by exploitation of structural reserves in composite space and aerospace structures contributes to this aim, however, it requires accurate and experimentally validated stability analysis. Currently, the potential of composite light weight structures, which are prone to buckling, is not fully exploited as appropriate guidelines in the field of aerospace and space applications do not exist. This paper deals with the state-of-the-art advances and challenges related to coupled stability analysis of composite structures which show very complex stability behaviour. Two types of thin-walled light weight structures endangered by buckling will be considered; imperfection tolerant and imperfection sensitive structures. For both groups improved design guidelines for composites structures are still under development. This paper gives a short state-of-the-art and presents proposals for future design guidelines.

[1]  Raimund Rolfes,et al.  Sensitivities to Geometrical and Loading Imperfections on Buckling of Composite Cylindrical Shells , 2002 .

[2]  M. Farshad,et al.  Buckling loads of CFRP composite cylinders under combined axial and torsion loading: experiments and computations , 2001 .

[3]  J. P. Peterson,et al.  Buckling of thin-walled circular cylinders, NASA SPACE VEHICLE DESIGN CRITERIA (Structures) , 1965 .

[4]  Richard Degenhardt,et al.  Probabilistic approach for improved buckling knock-down factors of CFRP cylindrical shells , 2007 .

[5]  Rolf Zimmermann,et al.  Experiments on buckling of CFRP cylindrical shells under non-uniform axial load. , 1994 .

[6]  Richard Degenhardt,et al.  Design and analysis of stiffened composite panels including post-buckling and collapse , 2008 .

[7]  Richard Degenhardt,et al.  Collapse Analysis, Defect Sensitivity and Load Paths , 2009 .

[8]  Richard Degenhardt,et al.  Investigations on imperfection sensitivity and deduction of improved knock-down factors for unstiffened CFRP cylindrical shells , 2010 .

[9]  Richard Degenhardt,et al.  EXPERIMENTS ON BUCKLING AND POSTBUCKLING OF THIN-WALLED CFRP STRUCTURES USING ADVANCED MEASUREMENT SYSTEMS , 2007 .

[10]  G. Schuëller,et al.  Buckling analysis of cylindrical shells with cutouts including random boundary and geometric imperfections , 2007 .

[11]  Luc Wullschleger.  Numerical investigation of the buckling behaviour of axially compressed circular cylinders having parametric initial dimple imperfections , 2006 .

[12]  Paul Seide,et al.  Elastic stability of thin-walled cylindrical and conical shells under axial compression , 1965 .

[13]  Richard Degenhardt,et al.  Experiments to Detect Damage Progression in Axially Compressed CFRP Panels under Cyclic Loading , 2008 .

[14]  Mark W. Hilburger,et al.  Toward a Probabilistic Preliminary Design Criterion for Buckling Critical Composite Shells , 2003 .

[15]  Russell Q. Bridge,et al.  The influence of circumferential weld-induced imperfections on the buckling of silos and tanks , 2001 .

[16]  James H. Starnes,et al.  Future directions and challenges in shell stability analysis , 1997 .

[17]  Raimund Rolfes,et al.  Robust design of composite cylindrical shells under axial compression — Simulation and validation , 2008 .

[18]  Walter Wunderlich,et al.  Direct evaluation of the ‘worst’ imperfection shape in shell buckling , 1997 .

[19]  Th. A. Winterstetter,et al.  Stability of circular cylindrical steel shells under combined loading , 2002 .

[20]  Mark W. Hilburger,et al.  Developing the Next Generation Shell Buckling Design Factors and Technologies , 2012 .

[21]  Elmar Breitbach,et al.  Structural engineering on deployable CFRP booms for a solar propelled sailcraft , 2006 .

[22]  Richard Degenhardt,et al.  COCOMAT - Improved Material Exploitation at Safe Design of Composite Airframe Structures by Accurate Simulation of Collapse , 2004 .

[23]  Rolf Zimmermann,et al.  Buckling tests with axially compressed unstiffened cylindrical shells made from CFRP , 1991 .