Process/equipment co-simulation for design and analysis of advanced energy systems

Abstract The grand challenge facing the power and energy industries is the development of efficient, environmentally friendly, and affordable technologies for next-generation energy systems. To provide solutions for energy and the environment, the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL) and its research partners in industry and academia are relying increasingly on the use of sophisticated computer-aided process design and optimization tools. In this paper, we describe recent progress toward developing an Advanced Process Engineering Co-Simulator (APECS) for the high-fidelity design, analysis, and optimization of energy plants. The APECS software system combines steady-state process simulation with multiphysics-based equipment simulations, such as those based on computational fluid dynamics (CFD). These co-simulation capabilities enable design engineers to optimize overall process performance with respect to complex thermal and fluid flow phenomena arising in key plant equipment items, such as combustors, gasifiers, turbines, and carbon capture devices. In this paper we review several applications of the APECS co-simulation technology to advanced energy systems, including coal-fired energy plants with carbon capture. This paper also discusses ongoing co-simulation R&D activities and challenges in areas such as CFD-based reduced-order modeling, knowledge management, advanced analysis and optimization, and virtual plant co-simulation. Continued progress in co-simulation technology – through improved integration, solution, and deployment – will have profound positive impacts on the design and optimization of high-efficiency, near-zero emission fossil energy systems.

[1]  W. Fu,et al.  A general cosimulation approach for coupled field-circuit problems , 2006, IEEE Transactions on Magnetics.

[2]  J. P. B. Mota,et al.  Dynamic modelling of an adsorption storage tank using a hybrid approach combining computational fluid dynamics and process simulation , 2004, Comput. Chem. Eng..

[3]  S. E. Zitney.  CAPE-OPEN Integration for Advanced Process Engineering Co-Simulation , 2006 .

[4]  Sandro Macchietto,et al.  General hybrid multizonal/CFD approach for bioreactor modeling , 2003 .

[5]  Timothy J. Skone,et al.  Water: A critical resource in the thermoelectric power industry , 2008 .

[6]  Leonardo Tognotti,et al.  CFD+reactor network analysis: an integrated methodology for the modeling and optimisation of industrial systems for energy saving and pollution reduction , 2002 .

[7]  L. Tognotti,et al.  NOX Emission Prediction from 3-D Complete Modelling to Reactor Network Analysis , 2000 .

[8]  Stephen E. Zitney,et al.  Plant design: Integrating Plant and Equipment Models , 2007 .

[9]  S. E. Zitney.  Use of CAPE-OPEN Standard in US-UK Collaboration on Virtual Plant Simulation , 2007 .

[10]  Gabriela Nicolescu,et al.  Codis - a Framework for continuous/discrete Systems Co-simulation , 2006, ADHS.

[11]  Herlander Mata-Lima.  Reservoir characterization with iterative direct sequential co-simulation: Integrating fluid dynamic data into stochastic model , 2008 .

[12]  D. L. Aumiller,et al.  AN INTEGRATED RELAP5-3D AND MUTLIPHASE CFD CODE SYSTEM UTILIZING A SEMI-implicit coupling technique , 2001 .

[13]  Mark Bryden,et al.  Towards the Integration of APECS with VE-Suite to Create a Comprehensive Virtual Engineering Environment , 2007 .

[14]  Leonardo Tognotti,et al.  A new procedure for predicting NOx emissions from furnaces , 2001 .

[15]  Paul G. A. Cizmas,et al.  Proper-Orthogonal Decomposition of Spatio-Temporal Patterns in Fluidized Beds , 2003 .

[16]  Sandro Macchietto,et al.  A general methodology for hybrid multizonal/CFD models: Part II. Automatic zoning , 2004, Comput. Chem. Eng..

[17]  S. Zitney,et al.  Development of CAPE-OPEN unit operations for advanced power systems modeling , 2007 .

[18]  T. Yuan,et al.  A reduced-order model for a bubbling fluidized bed based on proper orthogonal decomposition , 2005, Comput. Chem. Eng..

[19]  Stephen E. Zitney,et al.  Coupled CFD and Process Simulation of a Fuel Cell Auxiliary Power Unit , 2004 .

[20]  Jan Vierendeels,et al.  Vascular fluid-structure-interaction using Fluent and Abaqus software , 2006 .

[21]  Stephen E. Zitney.  Co-Simulation for Advanced Process Design and Optimization , 2009 .

[22]  Sandro Macchietto,et al.  A general framework for the integration of computational fluid dynamics and process simulation , 2000 .

[23]  L. Biegler,et al.  Reduced Order Model Based on Principal Component Analysis for Process Simulation and Optimization , 2009 .

[24]  Mark Bryden,et al.  Towards the Integration of APECS and VE-Suite for Virtual Power Plant Co-Simulation , 2007 .

[25]  Urmila M. Diwekar,et al.  Uncertainty analysis of an Igcc system with single-stage entrained-flow gasifier , 2008 .

[26]  Amy Henderson Squilacote.  The Paraview Guide , 2008 .

[27]  Liping Wang,et al.  Coupled simulations for naturally ventilated rooms between building simulation (BS) and computational fluid dynamics (CFD) for better prediction of indoor thermal environment , 2009 .

[28]  Eric Grol.  Technical assessment of an integrated gasification fuel cell combined cycle with carbon capture , 2009 .

[29]  Stephen E. Zitney,et al.  Integrated Process Simulation and CFD for Improved Process Engineering , 2002 .

[30]  Thomas A. Brenner,et al.  Acceleration techniques for reduced-order models based on proper orthogonal decomposition , 2008, J. Comput. Phys..

[31]  Sandro Macchietto,et al.  A general methodology for hybrid multizonal/CFD models: Part I. Theoretical framework , 2004, Comput. Chem. Eng..