Tailoring Mechanical Properties of Collagen-Based Scaffolds for Vascular Tissue Engineering: The Effects of pH, Temperature and Ionic Strength on Gelation

Collagen gels have been widely studied for applications in tissue engineering because of their biological implications. Considering their use as scaffolds for vascular tissue engineering, the main limitation has always been related to their low mechanical properties. During the process of in vitro self-assembly, which leads to collagen gelation, the size of the fibrils, their chemical interactions, as well as the resulting microstructure are regulated by three main experimental conditions: pH, ionic strength and temperature. In this work, these three parameters were modulated in order to increase the mechanical properties of collagen gels. The effects on the gelation process were assessed by turbidimetric and scanning electron microscopy analyses. Turbidity measurements showed that gelation was affected by all three factors and scanning electron images confirmed that major changes occurred at the microstructural level. Mechanical tests showed that the compressive and tensile moduli increased by four- and three-fold, respectively, compared to the control. Finally, viability tests confirmed that these gels are suitable as scaffolds for cellular adhesion and proliferation.

[1]  J. Paul Robinson,et al.  Tensile mechanical properties of three-dimensional type I collagen extracellular matrices with varied microstructure. , 2002, Journal of biomechanical engineering.

[2]  D. Herbage,et al.  Collagen-based biomaterials as 3D scaffold for cell cultures: applications for tissue engineering and gene therapy , 2000, Medical and Biological Engineering and Computing.

[3]  Enrico Gratton,et al.  Image correlation spectroscopy of multiphoton images correlates with collagen mechanical properties. , 2008, Biophysical journal.

[4]  Frédéric Couet,et al.  Design of a perfusion bioreactor specific to the regeneration of vascular tissues under mechanical stresses. , 2005, Artificial organs.

[5]  Joseph W Freeman,et al.  Collagen self-assembly and the development of tendon mechanical properties. , 2003, Journal of biomechanics.

[6]  C. Doillon,et al.  Preparation of ready-to-use, storable and reconstituted type I collagen from rat tail tendon for tissue engineering applications , 2006, Nature Protocols.

[7]  Eric A Nauman,et al.  Mechanical characterization of collagen fibers and scaffolds for tissue engineering. , 2003, Biomaterials.

[8]  G. C. Wood.  The formation of fibrils from collagen solutions. 2. A mechanism of collagen-fibril formation. , 1960, The Biochemical journal.

[9]  Athanassios Sambanis,et al.  A biological hybrid model for collagen-based tissue engineered vascular constructs. , 2003, Biomaterials.

[10]  Lucy Di-Silvio,et al.  Encyclopedia of Biomaterials and Biomedical Engineering. , 2004 .

[11]  Diego Mantovani,et al.  On the effects of UV-C and pH on the mechanical behavior, molecular conformation and cell viability of collagen-based scaffold for vascular tissue engineering. , 2010, Macromolecular bioscience.

[12]  Debby Gawlitta,et al.  Properties of engineered vascular constructs made from collagen, fibrin, and collagen-fibrin mixtures. , 2004, Biomaterials.

[13]  G. Na,et al.  Mechanism of in vitro collagen fibril assembly. Kinetic and morphological studies. , 1986, The Journal of biological chemistry.

[14]  Frédéric Couet,et al.  How to Optimize Maturation in a Bioreactor for Vascular Tissue Engineering: Focus on a Decision Algorithm for Experimental Planning , 2010, Annals of Biomedical Engineering.

[15]  J. Rosenblatt,et al.  Effect of electrostatic forces on the dynamic rheological properties of injectable collagen biomaterials. , 1992, Biomaterials.

[16]  J. Rosenblatt,et al.  Injectable collagen as a pH-sensitive hydrogel. , 1994, Biomaterials.

[17]  D. Mantovani,et al.  Preparation and characterization of a scaffold for vascular tissue engineering by direct-assembling of collagen and cells in a cylindrical geometry. , 2007, Macromolecular bioscience.

[18]  A. Cooper.  Thermodynamic studies of the assembly in vitro of native collagen fibrils. , 1970, The Biochemical journal.

[19]  G. C. Wood,et al.  The formation of fibrils from collagen solutions. 1. The effect of experimental conditions: kinetic and electron-microscope studies. , 1960, The Biochemical journal.

[20]  L. Kaufman,et al.  Elastic moduli of collagen gels can be predicted from two-dimensional confocal microscopy. , 2009, Biophysical journal.

[21]  Christopher Breuer,et al.  Artificial blood vessel: the Holy Grail of peripheral vascular surgery. , 2005, Journal of vascular surgery.

[22]  D. Mantovani,et al.  Biological performances of collagen-based scaffolds for vascular tissue engineering. , 2005, Biomaterials.

[23]  J. Harris,et al.  Influence of saline and pH on collagen type I fibrillogenesis in vitro: fibril polymorphism and colloidal gold labelling. , 2007, Micron.

[24]  K. Piez,et al.  Collagen fibril formation. Optimal in vitro conditions and preliminary kinetic results. , 1978, The Journal of biological chemistry.

[25]  D. Helseth,et al.  Collagen self-assembly in vitro. Differentiating specific telopeptide-dependent interactions using selective enzyme modification and the addition of free amino telopeptide. , 1981, The Journal of biological chemistry.

[26]  Anthony Atala,et al.  Methods Of Tissue Engineering , 2006 .

[27]  Steven C George,et al.  Noninvasive assessment of collagen gel microstructure and mechanics using multiphoton microscopy. , 2007, Biophysical journal.

[28]  R Langer,et al.  Functional arteries grown in vitro. , 1999, Science.

[29]  Robert M. Nerem,et al.  Dynamic Mechanical Conditioning of Collagen-Gel Blood Vessel Constructs Induces Remodeling In Vitro , 2000, Annals of Biomedical Engineering.

[30]  D. Mantovani,et al.  Preparation of ready-to-use, stockable and reconstituted collagen. , 2005, Macromolecular bioscience.

[31]  G. Wnek,et al.  Encyclopedia of biomaterials and biomedical engineering , 2008 .

[32]  L. Kaufman,et al.  Rheology and confocal reflectance microscopy as probes of mechanical properties and structure during collagen and collagen/hyaluronan self-assembly. , 2009, Biophysical journal.

[33]  G. C. WOODt,et al.  The Formation of Fibrils from Collagen Solutions * , 2022 .

[34]  Alexander M Seifalian,et al.  Current status of prosthetic bypass grafts: a review. , 2005, Journal of biomedical materials research. Part B, Applied biomaterials.

[35]  Chrysanthi Williams,et al.  Small-diameter artificial arteries engineered in vitro. , 2005, Circulation research.

[36]  A. Ratcliffe.  Tissue engineering of vascular grafts. , 2000, Matrix biology : journal of the International Society for Matrix Biology.

[37]  P. Panine,et al.  Fibrillogenesis in dense collagen solutions: a physicochemical study. , 2008, Journal of molecular biology.

[38]  Frédéric Couet,et al.  Macromolecular biomaterials for scaffold-based vascular tissue engineering. , 2007, Macromolecular bioscience.

[39]  T. Aigner,et al.  Collagens--structure, function, and biosynthesis. , 2003, Advanced drug delivery reviews.