Multiphysics Simulation of Low-Amplitude Acoustic Wave Detection by Piezoelectric Wafer Active Sensors Validated by In-Situ AE-Fatigue Experiment

Piezoelectric wafer active sensors (PWAS) are commonly used for detecting Lamb waves for structural health monitoring application. However, in most applications of active sensing, the signals are of high-amplitude and easy to detect. In this article, we have shown a new avenue of using the PWAS transducer for detecting the low-amplitude fatigue-crack related acoustic emission (AE) signals. Multiphysics finite element (FE) simulations were performed with two PWAS transducers bonded to the structure. Various configurations of the sensors were studied by using the simulations. One PWAS was placed near to the fatigue-crack and the other one was placed at a certain distance from the crack. The simulated AE event was generated at the crack tip. The simulation results showed that both PWAS transducers were capable of sensing the AE signals. To validate the multiphysics simulation results, an in-situ AE-fatigue experiment was performed. Two PWAS transducers were bonded to the thin aerospace test coupon. The fatigue crack was generated in the test coupon which had produced low-amplitude acoustic waves. The low-amplitude fatigue-crack related AE signals were successfully captured by the PWAS transducers. The distance effect on the captured AE signals was also studied. It has been shown that some high-frequency contents of the AE signal have developed as they travel away from the crack.

[1]  E. Manoach,et al.  An Investigation on Vibration-based Damage Detection in Circular Plates , 2009 .

[2]  J. E. Sinclair,et al.  The origin of acoustic emission during deformation of aluminium and an aluminium–magnesium alloy , 1981 .

[3]  Oleh Serhiyenko,et al.  Acoustic emission estimation of crack formation in aluminium alloys , 2010 .

[4]  Chan Ghee Koh,et al.  Acoustic emission source location and noise cancellation for crack detection in rail head , 2016 .

[5]  H Prosser William.  Applications of Advanced, Waveform Based AE Techniques for Testing Composite Materials , 1996 .

[7]  V. Giurgiutiu,et al.  Guidelines for using the finite element method for modeling guided Lamb wave propagation in SHM processes , 2012 .

[8]  Bernd Köhler,et al.  Shear horizontal piezoelectric fiber patch transducers (SH-PFP) for guided elastic wave applications , 2016 .

[9]  Jian Cai,et al.  Signal Construction-Based Dispersion Compensation of Lamb Waves Considering Signal Waveform and Amplitude Spectrum Preservation , 2016, Materials.

[10]  Miaolin Feng,et al.  Modeling of Fatigue Crack Propagation , 2004 .

[11]  W. H. Prosser,et al.  Application of normal mode expansion to accoustic emission waves in finite plates , 1996 .

[12]  Christian Willberg,et al.  Simulation Methods for Guided Wave-Based Structural Health Monitoring: A Review , 2015 .

[13]  John M. Gary,et al.  Modeling of buried monopole and dipole sources of acoustic emission with a finite element technique , 1999 .

[14]  Markus G. R. Sause,et al.  Modeling of Acoustic Emission Signal Propagation in Waveguides , 2015, Sensors.

[15]  U. Gabbert,et al.  Comparison of different higher order finite element schemes for the simulation of Lamb waves , 2012 .

[16]  M. Lysak.  Development of the theory of acoustic emission by propagating cracks in terms of fracture mechanics , 1996 .

[17]  Victor Giurgiutiu,et al.  Toward identifying crack-length-related resonances in acoustic emission waveforms for structural health monitoring applications , 2018 .

[18]  Aguinaldo Fraddosio,et al.  Mechanical characterization of CFRP composites by ultrasonic immersion tests: Experimental and numerical approaches , 2014 .

[19]  Eric Udd,et al.  Acoustic emission detection using fiber Bragg gratings , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[20]  Markus G. R. Sause,et al.  Finite Element Modelling of Cracks as Acoustic Emission Sources , 2015 .

[21]  Victor Giurgiutiu,et al.  Interaction of Lamb waves with rivet hole cracks from multiple directions , 2017 .

[22]  Victor Giurgiutiu,et al.  Piezoelectric wafer active sensors for in situ ultrasonic‐guided wave SHM , 2008 .

[23]  Victor Giurgiutiu,et al.  Acoustic emission source modeling in a plate using buried moment tensors , 2017, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[24]  Gang Li,et al.  Recent Progress on Distributed Structural Health Monitoring Research at NUAA , 2008 .

[25]  Χριστόφορος Ρεκατσίνας,et al.  Time domain spectral finite element methods for the simulation of wave propagation in composite layered structures with active piezoelectric sensors , 2016 .

[26]  W. H. Prosser,et al.  Finite Element and Plate Theory Modeling of Acoustic Emission Waveforms , 1999 .

[27]  John E. T. Penny,et al.  Crack Modeling for Structural Health Monitoring , 2002 .

[28]  M. N. Bassim,et al.  Acoustic emission mechanisms during high-cycle fatigue , 1981 .

[29]  Victor Giurgiutiu,et al.  Guided Wave Based Crack Detection in the Rivet Hole Using Global Analytical with Local FEM Approach , 2016, Materials.

[30]  A. Mal,et al.  Characteristics of elastic waves generated by crack initiation in aluminum alloys under fatigue loading , 2001 .

[31]  John A. Hudson,et al.  Source type plot for inversion of the moment tensor , 1989 .

[32]  Bo Sun,et al.  Lamb-Wave-Based Tomographic Imaging Techniques for Hole-Edge Corrosion Monitoring in Plate Structures , 2016, Materials.

[33]  D. J. Buttle,et al.  Acoustic emission source location in fiber reinforced plastic composites , 1988 .

[34]  Victor Giurgiutiu,et al.  Piezoelectric Wafer Embedded Active Sensors for Aging Aircraft Structural Health Monitoring , 2002 .

[35]  Victor Giurgiutiu,et al.  Predictive Modeling of Piezoelectric Wafer Active Sensors for Structural Health Monitoring , 2014 .

[36]  A. Mal,et al.  AE wavefield calculations in a plate , 1998 .

[37]  Masayasu Ohtsu,et al.  GENERALIZED THEORY AND SOURCE REPRESENTATIONS OF ACOUSTIC EMISSION. , 1985 .

[38]  Wang Qiang,et al.  Baseline-free Imaging Method based on New PZT Sensor Arrangements , 2009 .

[39]  C. B. Scruby,et al.  Characterisation of fatigue crack extension by quantitative acoustic emission , 1985, International Journal of Fracture.

[40]  C. Frohlich,et al.  Earthquake focal mechanisms, moment tensors, and the consistency of seismic activity near plate boundaries , 1992 .

[41]  Marwa Abdelrahman,et al.  Acoustic emission based damage assessment method for prestressed concrete structures: Modified index of damage , 2014 .

[42]  Ke Wei,et al.  Acoustic emission study of fatigue crack closure of physical short and long cracks for aluminum alloy LY12CZ , 2009 .

[43]  E Agletdinov,et al.  A novel Bayesian approach to acoustic emission data analysis. , 2016, Ultrasonics.

[44]  Victor Giurgiutiu,et al.  Analysis of acoustic emission waveforms from fatigue cracks , 2017, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[45]  Giola Santoni,et al.  Fundamental studies in the Lamb-wave interaction between piezoelectric wafer active sensor and host structure during structural health monitoring , 2010 .

[46]  R. Harrington,et al.  Acoustic emissions of fatigue crack growth , 1973 .

[47]  J Dual,et al.  One sensor acoustic emission localization in plates. , 2016, Ultrasonics.

[48]  Jeong-Beom Ihn,et al.  Pitch-catch Active Sensing Methods in Structural Health Monitoring for Aircraft Structures , 2008 .

[49]  C. E. Richards,et al.  Acoustic emission monitoring of fatigue crack growth , 1978 .

[50]  K. T. Ramesh,et al.  Acoustic Emission of Deformation Twinning in Magnesium , 2016, Materials.

[51]  Victor Giurgiutiu,et al.  Effective non-reflective boundary for Lamb waves: Theory, finite element implementation, and applications , 2015 .