Squeeze-film damping of flexible microcantilevers at low ambient pressures: theory and experiment

An improved theoretical approach is proposed to predict the dynamic behavior of long, slender and flexible microcantilevers affected by squeeze-film damping at low ambient pressures. Our approach extends recent continuum gas damping models (Veijola 2004 J. Micromech. Microeng. 14 1109‐18, Gallis and Torczynski 2004 J. Microelectromech. Syst. 13 653‐9), which were originally derived for a rigid oscillating plate near a wall, to flexible microcantilevers for calculating and predicting squeeze-film damping ratios of higher order bending modes at reduced ambient pressures. Theoretical frequency response functions are derived for a flexible microcantilever beam excited both inertially and via external forcing. Experiments performed carefully at controlled gas pressures are used to validate our theoretical approach over five orders of the Knudsen number. In addition, we investigate the relative importance of theoretical assumptions made in the Reynolds-equation-based approach for flexible microelectromechanical systems. (Some figures in this article are in colour only in the electronic version)

[1]  D. Czaplewski,et al.  A Soft-Landing Waveform for Actuation of a Single-Pole Single-Throw Ohmic RF MEMS Switch , 2005, Journal of Microelectromechanical Systems.

[2]  Minhang Bao,et al.  Squeeze film air damping in MEMS , 2007 .

[3]  Yuancheng Sun,et al.  Modified Reynolds' equation and analytical analysis of squeeze-film air damping of perforated structures , 2003 .

[4]  H. Tilmans,et al.  Electrostatically driven vacuum-encapsulated polysilicon resonators Part I. Design and fabrication , 1994 .

[5]  L. Meirovitch Analytical Methods in Vibrations , 1967 .

[6]  Z. Kádár,et al.  Quality factor of torsional resonators in the low-pressure region , 1996 .

[7]  Timo Veijola,et al.  Extending the validity of squeezed-film damper models with elongations of surface dimensions , 2005 .

[8]  Hartono Sumali,et al.  Squeeze-film damping in the free molecular regime: model validation and measurement on a MEMS , 2007 .

[9]  H. Tilmans,et al.  Electrostatically driven vacuum encapsulated polysilicon resonators , 1993 .

[10]  J. Torczynski,et al.  An improved Reynolds-equation model for gas damping of microbeam motion , 2003, Journal of Microelectromechanical Systems.

[11]  A. Raman,et al.  Comparative dynamics of magnetically, acoustically, and Brownian motion driven microcantilevers in liquids , 2007 .

[12]  Fook Siong Chau,et al.  Analytical solution of the modified Reynolds equation for squeeze film damping in perforated MEMS structures , 2007 .

[13]  J. B. Shukla,et al.  Generalized reynolds equation with slip at bearing surfaces: Multiple-layer lubrication theory , 1980 .

[14]  Measuring Natural Frequency and Non-Linear Damping on Oscillating Micro Plates , 2007 .

[15]  J. R. Pierce,et al.  Scientific foundations of vacuum technique , 1949 .

[16]  Timo Veijola,et al.  Compact models for squeezed-film dampers with inertial and rarefied gas effects , 2004 .

[17]  Yuancheng Sun,et al.  Energy transfer model for squeeze-film air damping in low vacuum , 2002 .

[18]  Weileun Fang,et al.  Tuning the quality factor of bulk micromachined structures using squeezed-film damping , 2005, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[19]  Hartono Sumali,et al.  Waveform design for pulse-and-hold electrostatic actuation in MEMS , 2007 .

[20]  R. Pratap,et al.  Influence of Boundary Conditions on the Dynamic Characteristics of Squeeze Films in MEMS Devices , 2007, Journal of Microelectromechanical Systems.

[21]  H. Tilmans,et al.  Electrostatically driven vacuum-encapsulated polysilicon resonators part II. theory and performance , 1994 .

[22]  Paolo Decuzzi,et al.  The dynamic response of resistive microswitches: switching time and bouncing , 2006 .

[23]  H. H. Richardson,et al.  A Study of Fluid Squeeze-Film Damping , 1966 .

[24]  Felix Sharipov,et al.  Data on Internal Rarefied Gas Flows , 1998 .

[25]  Changchun Zhu,et al.  The theoretical analysis on damping characteristics of resonant microbeam in vacuum , 1999 .

[26]  T. Veijola,et al.  Equivalent-circuit model of the squeezed gas film in a silicon accelerometer , 1995 .

[27]  W. E. Langlois Isothermal squeeze films , 1961 .

[28]  B. Hamrock,et al.  Fundamentals of Fluid Film Lubrication , 1994 .

[29]  R. Gohar,et al.  Fluid film lubrication , 2010 .

[30]  Leonard Meirovitch,et al.  Elements Of Vibration Analysis , 1986 .

[31]  Wenjing Ye,et al.  On the squeeze-film damping of micro-resonators in the free-molecule regime , 2004 .

[32]  J. J. Blech On Isothermal Squeeze Films , 1983 .

[33]  W. A. Gross,et al.  Fluid film lubrication , 1980 .

[34]  George G. Adams,et al.  Modeling, simulation and measurement of the dynamic performance of an ohmic contact, electrostatically actuated RF MEMS switch , 2007 .

[35]  Z. J. Wang,et al.  Effect of fluids on the Q factor and resonance frequency of oscillating micrometer and nanometer scale beams. , 2004, Physical review. E, Statistical, nonlinear, and soft matter physics.

[36]  Rudra Pratap,et al.  Effect of flexural modes on squeeze film damping in MEMS cantilever resonators , 2007 .

[37]  M. Younis,et al.  A new approach to the modeling and simulation of flexible microstructures under the effect of squeeze-film damping , 2004 .

[38]  Robert B. Darling,et al.  Compact analytical modeling of squeeze film damping with arbitrary venting conditions using a Green's function approach , 1998 .

[39]  J. Sader Frequency response of cantilever beams immersed in viscous fluids with applications to the atomic force microscope , 1998 .

[40]  Alina Alexeenko,et al.  Compact model of squeeze-film damping based on rarefied flow simulations , 2009 .

[41]  M. K. Andrews,et al.  A comparison of squeeze-film theory with measurements on a microstructure , 1993 .