Waveform adjustment for obtaining higher quality droplets based on a multi-satellite droplet monitoring system

In the field of printed electronics, there are many kinds of ink with a variety of performance and parameters. In order to generate high-quality droplets, it is necessary to eject droplet for testi...

[1]  Vivek Subramanian,et al.  All inkjet-printed, fully self-aligned transistors for low-cost circuit applications , 2011 .

[2]  A. Amirfazli,et al.  Pneumatic drop generator: Liquid pinch-off and velocity of single droplets , 2016 .

[3]  Wallace W. Carr,et al.  An experimental study of drop-on-demand drop formation , 2006 .

[4]  Ri Li,et al.  Droplet generation from pulsed micro-jets , 2008 .

[5]  Weng-Sing Hwang,et al.  The simulation of micro droplet behavior of molten lead-free solder in inkjet printing process and its experimental validation , 2012 .

[6]  Kye-Si Kwon,et al.  An inkjet vision measurement technique for high-frequency jetting. , 2014, The Review of scientific instruments.

[7]  Manfred Mengel,et al.  Inkjet printed dielectrics for electronic packaging of chip embedding modules , 2010 .

[8]  C. Dossou-Yovo,et al.  Inkjet printing of ceramic colloidal suspensions: Filament growth and breakup , 2016 .

[9]  Xing Wang,et al.  A waveform design method for piezoelectric inkjet printhead with Doppler vibration test and numerical simulation , 2018, Microelectronic Engineering.

[10]  Kye-Si Kwon,et al.  Experimental analysis of waveform effects on satellite and ligament behavior via in situ measurement of the drop-on-demand drop formation curve and the instantaneous jetting speed curve , 2010 .

[11]  C. Schindler,et al.  Inkjet-printed resistive memory cells for transparent electronics , 2018, Microelectronic Engineering.

[12]  Jooho Moon,et al.  Influence of fluid physical properties on ink-jet printability. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[13]  Jiaqing Chang,et al.  Effects of dwell time of excitation waveform on meniscus movements for a tubular piezoelectric print-head: experiments and model , 2017 .

[14]  I. Cacciotti,et al.  Electroanalysis moves towards paper-based printed electronics: carbon black nanomodified inkjet-printed sensor for ascorbic acid detection as a case study , 2018, Sensors and Actuators B: Chemical.