Systematic Methodology for Design of Tailor-Made Blended Products: Fuels and Other Blended Products

[1]  Aage Fredenslund,et al.  UNIFAC parameter table for prediction of liquid-liquid equilibriums , 1981 .

[2]  V. B. Guthrie,et al.  Petroleum Products Handbook , 1960 .

[3]  Luke E. K. Achenie,et al.  The optimal design of refrigerant mixtures for a two-evaporator refrigeration system , 1997 .

[4]  Gürkan Sin,et al.  Group-contribution+ (GC+) based estimation of properties of pure components: Improved property estimation and uncertainty analysis , 2012 .

[5]  Krist V. Gernaey,et al.  Tailor-made Design of Chemical Blends using Decomposition-based Computer-aided Approach , 2011 .

[6]  Van Krevelen.  Properties of Polymers: Their Correlation with Chemical Structure; their Numerical Estimation and Prediction from Additive Group Contributions , 2009 .

[7]  Rafiqul Gani,et al.  Computer-aided molecular design with combined molecular modeling and group contribution , 1999 .

[8]  Rafiqul Gani,et al.  Design of formulated products: Experimental component , 2012 .

[9]  Rafiqul Gani,et al.  Design of Formulated Products: A Systematic Methodology , 2011 .

[10]  Rafiqul Gani,et al.  Chemical product design : toward a perspective through case studies , 2007 .

[11]  J. Smith,et al.  Introduction to chemical engineering thermodynamics , 1949 .

[12]  Horng-Jang Liaw,et al.  A model for predicting the flash point of ternary flammable solutions of liquid , 2004 .

[13]  Michael Hill,et al.  Chemical Product Engineering - The third paradigm , 2009, Comput. Chem. Eng..

[14]  R van Basshuysen,et al.  Internal combustion engine handbook - basics, components, systems and perspectives , 2004 .

[15]  Jack Zakarian.  The Limitations of the Viscosity Index and Proposals for Other Methods to Rate Viscosity-Temperature Behavior of Lubricating Oils , 2012 .

[16]  Amal Elkilani,et al.  Chapter 9 – Product Blending , 2010 .

[17]  Edward L Cussler,et al.  An Introduction to Chemical Product Design , 2000 .

[18]  Edward L Cussler,et al.  Chemical product engineering , 2003 .

[19]  Efstratios N. Pistikopoulos,et al.  Property Modelling and Simulation for Product and Process Design , 2002 .

[20]  Krist V. Gernaey,et al.  Design of Sustainable Blended Products using an Integrated Methodology , 2013 .

[21]  ISOAMYL ALCOHOL,et al.  Acetic acid , 2015, Reactions Weekly.

[22]  Rafiqul Gani,et al.  Computer aided mixture design with specified property constraints , 1992 .

[23]  R. Gani,et al.  Computer aided product design: problem formulations, methodology and applications , 1996 .

[24]  Krist V. Gernaey,et al.  Computer-Aided Approach for Design of Tailor-Made Blended Products , 2012 .

[25]  S. Q. Rizvi.  A Comprehensive Review of Lubricant Chemistry, Technology, Selection, and Design , 2009 .

[26]  Krist V. Gernaey,et al.  An Integrated Methodology for Design of Tailor-Made Blended Products , 2012 .

[27]  Gholamhassan Najafi,et al.  Performance and exhaust emissions of a gasoline engine with ethanol blended gasoline fuels using artificial neural network , 2009 .

[28]  Horng-Jang Liaw,et al.  Prediction of Miscible Mixtures Flash-point from UNIFAC group contribution methods , 2011 .

[29]  Christianto Wibowo,et al.  An integrative approach to product development—A skin-care cream , 2008, Computers & Chemical Engineering.

[30]  Krist V. Gernaey,et al.  A systematic methodology for design of tailor-made blended products , 2014, Comput. Chem. Eng..

[31]  Gürkan Sin,et al.  Estimation of Environment-Related Properties of Chemicals for Design of Sustainable Processes: Development of Group-Contribution+ (GC+) Property Models and Uncertainty Analysis , 2012, J. Chem. Inf. Model..

[32]  Krist V. Gernaey,et al.  Model-Based Blend Design: Application to Lubricant Oils , 2013 .

[33]  Pedro M. Saraiva,et al.  Chemical product engineering: An emerging paradigm within chemical engineering , 2006 .

[34]  Horng-Jang Liaw,et al.  A mathematical model for predicting the flash point of binary solutions , 2002 .

[35]  Rafiqul Gani,et al.  Computer aided molecular and mixture design with specified property constraints , 1993 .

[36]  Jorge A. Marrero,et al.  Group-contribution based estimation of pure component properties , 2001 .

[37]  Rafiqul Gani,et al.  Design of tailor-made chemical blend using a decomposition-based computer-aided approach , 2011, 2011 Fourth International Conference on Modeling, Simulation and Applied Optimization.

[38]  Amol Hukkerikar,et al.  Development of pure component property models for chemical product-process design and analysis , 2013 .

[39]  M. Al-Hasan.  Effect of ethanol-unleaded gasoline blends on engine performance and exhaust emission , 2003 .

[40]  Krist V. Gernaey,et al.  Systematic design of tailor-made blended products , 2013 .

[41]  Calvin F. Spencer,et al.  Prediction of bubble-point density of mixtures , 1973 .

[42]  Christianto Wibowo,et al.  Product‐centered processing: Manufacture of chemical‐based consumer products , 2002 .

[43]  Aage Fredenslund,et al.  Group-contribution viscosity predictions of liquid mixtures using UNIFAC-VLE parameters , 1993 .

[44]  K. Sopian,et al.  Overview of the production of biodiesel from Waste cooking oil , 2013 .

[45]  Alírio E. Rodrigues,et al.  A case study of product engineering: Performance of microencapsulated perfumes on textile applications , 2012 .