A numerical model of delamination in composite laminated beams using the LRZ beam element based on the refined zigzag theory

A method based on the Refined Zigzag Theory (RZT) to model delamination in composite laminated beam structures is presented. The novelty of this method is the use of one-dimensional finite elements to discretize the geometry of the beam. The key property of this beam element, named LRZ [1], is the possibility to capture the relative displacement between consecutive layers which occurs during delamination. The fracture mode that the LRZ element is capable to predict is mode II. In order to capture the relative displacement using the LRZ element it is necessary to adapt the RZT theory as presented in this paper. The mechanical properties of the layers are modeled using a continuum isotropic damage model [2]. The modified Newton–Raphson method is used for solving the non-linear problem. The RZT theory, the LRZ finite element and the isotropic damage model are described in the paper. Also, the implicit integrations algorithm is presented. The performance of the LRZ element is analyzed by studying the delamination in a beam for two different laminates, using the plane stress solution as a reference.

[1]  Marco Gherlone,et al.  A Refined Zigzag Beam Theory for Composite and Sandwich Beams , 2009 .

[2]  Aditi Chattopadhyay,et al.  Unified Approach to Modeling Matrix Cracking and Delamination in Laminated Composite Structures , 2001 .

[3]  J. Reddy,et al.  THEORIES AND COMPUTATIONAL MODELS FOR COMPOSITE LAMINATES , 1994 .

[4]  S. Timoshenko,et al.  LXVI. On the correction for shear of the differential equation for transverse vibrations of prismatic bars , 1921 .

[5]  Sergio Oller,et al.  Simple and accurate two-noded beam element for composite laminated beams using a refined zigzag theory , 2012 .

[6]  Todd O. Williams,et al.  A general theory for laminated plates with delaminations , 1997 .

[7]  E. Oñate,et al.  Computationally optimized formulation for the simulation of composite materials and delamination failures , 2011 .

[8]  Dahsin Liu,et al.  An Overall View of Laminate Theories Based on Displacement Hypothesis , 1996 .

[9]  G. Kirchhoff,et al.  Über das Gleichgewicht und die Bewegung einer elastischen Scheibe. , 1850 .

[10]  R. C. Averill,et al.  C0 zig-zag finite element for analysis of laminated composite beams , 1999 .

[11]  Ugo Icardi,et al.  C0 plate element for delamination damage analysis, based on a zig-zag model and strain energy updating , 2005 .

[12]  J. Reddy,et al.  DELAMINATION IN CROSS-PLY LAMINATED BEAMS USING THE LAYERWISE THEORY , 2009 .

[13]  J. N. Reddy,et al.  A generalization of two-dimensional theories of laminated composite plates† , 1987 .

[14]  E. Carrera.  Historical review of Zig-Zag theories for multilayered plates and shells , 2003 .

[15]  Marco Gherlone,et al.  A consistent refinement of first-order shear deformation theory for laminated composite and sandwich plates using improved zigzag kinematics , 2010 .

[16]  J. Chaboche,et al.  Mechanics of Solid Materials , 1990 .

[17]  W. Wagner,et al.  Simulation of delamination in stringer stiffened fiber-reinforced composite shells , 2008 .

[18]  Wu Zhen,et al.  A Selective Review on Recent Development of Displacement-Based Laminated Plate Theories , 2008 .

[19]  B. Mohammadi,et al.  Delamination buckling growth in laminated composites using layerwise-interface element , 2010 .

[20]  E. Reissner.  The effect of transverse shear deformation on the bending of elastic plates , 1945 .

[21]  Pedro P. Camanho,et al.  A damage model for the simulation of delamination in advanced composites under variable-mode loading , 2006 .

[22]  O. C. Zienkiewicz,et al.  El método de los elementos finitos , 1981 .

[23]  Larsgunnar Nilsson,et al.  Modeling of delamination using a discretized cohesive zone and damage formulation , 2002 .

[24]  Claudio Balzani,et al.  An interface element for the simulation of delamination in unidirectional fiber-reinforced composite laminates , 2008 .

[25]  V. V. Bolotin.  Delaminations in composite structures: Its origin, buckling, growth and stability , 1996 .

[26]  M. Gherlone,et al.  Refined zigzag theory for homogeneous, laminated composite, and sandwich plates: a homogeneous limit methodology for zigzag function selection , 2010 .

[27]  J. N. Reddy,et al.  Modeling of delamination in composite laminates using a layer-wise plate theory , 1991 .

[28]  Ronald Krueger,et al.  The Virtual Crack Closure Technique : History , Approach and Applications , 2002 .

[29]  Marco Gherlone,et al.  A homogeneous limit methodology and refinements of computationally efficient zigzag theory for homogeneous, laminated composite, and sandwich plates , 2011 .

[30]  R. D. Mindlin,et al.  Influence of rotary inertia and shear on flexural motions of isotropic, elastic plates , 1951 .

[31]  Pedro P. Camanho,et al.  Accurate simulation of delamination growth under mixed-mode loading using cohesive elements: Definition of interlaminar strengths and elastic stiffness , 2010 .

[32]  Ronald C. Averill,et al.  Development of simple, robust finite elements based on refined theories for thick laminated beams , 1996 .