Numerical investigation on the performance of a solar air heater using inclined impinging jets on absorber plate with parallel and crossing orientation of nozzles

[1]  Jian Li,et al.  Numerical Modeling of Branching-Streamer Propagation in Ester-Based Insulating Oil Under Positive Lightning Impulse Voltage: Effects From Needle Curvature Radius , 2023, IEEE Transactions on Dielectrics and Electrical Insulation.

[2]  A. Biswas,et al.  Parametric investigation on the thermo-hydraulic performance of a novel solar air heater design with conical protruded nozzle jet impingement , 2023, Applied Thermal Engineering.

[3]  S. Jafarmadar,et al.  Effect of various configurations of swirl generator system on the hydrothermal performance of the flat-plate solar collector , 2022, Alexandria Engineering Journal.

[4]  O. Alomar,et al.  Efficiency enhancement of solar air heater collector by modifying jet impingement with v-corrugated absorber plate , 2022, Journal of Energy Storage.

[5]  K. Arslan,et al.  Effect of New Design of Elongated Jet Hole on Thermal Efficiency of Solar Air Heater , 2022, Thermal Science and Engineering Progress.

[6]  Ranchan Chauhan,et al.  Analytical investigation of jet impingement solar air heater with dimple-roughened absorber surface via thermal and effective analysis , 2022, Renewable Energy.

[7]  S. Khalilarya,et al.  Energy harvesting feasibility from photovoltaic/thermal (PV/T) hybrid system with Ag/Wangxu Li,et al.  Analysis of Surface Pressure Pulsation Characteristics of Centrifugal Pump Magnetic Liquid Sealing Film , 2022, Frontiers in Energy Research.

[9]  S. Chand,et al.  Thermal performance enhancement of solar air heater using louvered fins collector , 2022, Solar Energy.

[10]  Harish Kumar Ghritlahre,et al.  A detailed review of various types of solar air heaters performance , 2022, Solar Energy.

[11]  Jian-ping Wang,et al.  Investigation of counter-rotating shock wave and wave direction control of hollow rotating detonation engine with Laval nozzle , 2022, Physics of Fluids.

[12]  A. Asadi,et al.  Hydrothermal performance of humid air flow in a rectangular solar air heater equipped with V‐shaped ribs , 2022, Energy Science & Engineering.

[13]  M. Farhadi,et al.  On the thermal performance of evacuated tube solar collector integrated with phase change material , 2022, Sustainable Energy Technologies and Assessments.

[14]  Dianrong Gao,et al.  DPM-LES investigation on flow field dynamic and acoustic characteristics of a twin-fluid nozzle by multi-field coupling method , 2022, International Journal of Heat and Mass Transfer.

[15]  B. N. Prasad,et al.  Experimental investigation of thermo-hydraulic efficiency and performance characteristics of an impinging jet-finned type solar air heater , 2022, Sustainable Energy Technologies and Assessments.

[16]  P. Ning,et al.  Novel method for high-performance simultaneous removal of NOx and SO2 by coupling yellow phosphorus emulsion with red mud , 2022 .

[17]  Adarsh Kumar,et al.  Thermo-hydraulic and exergy analysis of inclined impinging jets on absorber plate of solar air heater , 2021 .

[18]  A. Issakhov,et al.  Design-eligibility study of solar thermal helically coiled heat exchanging system with annular dimples by irreversibility concept , 2021, Renewable Energy.

[19]  Sébastien Poncet,et al.  Numerical modeling of an innovative arc shape rib based solar air heater , 2021, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

[20]  N. Karimi,et al.  Numerical simulation of a solar air heater equipped with wavy and raccoon-shaped fins: The effect of fins’ height , 2021, Sustainable Energy Technologies and Assessments.

[21]  J. R. Senapati,et al.  Thermo-hydraulic performance analysis of a solar air heater (SAH) with quarter-circular ribs on the absorber plate: A comparative study , 2021 .

[22]  K. Sopian,et al.  Thermal performance of jet-impingement solar air heater with transverse ribs absorber plate , 2021 .

[23]  Harish Kumar Ghritlahre,et al.  Accurate prediction of exergetic efficiency of solar air heaters using various predicting methods , 2020 .

[24]  R. Saini,et al.  Numerical investigation on the performance of a solar air heater using jet impingement with absorber plate , 2020 .

[25]  Purvi Chandrakar,et al.  Application of ANN model to predict the performance of solar air heater using relevant input parameters , 2020 .

[26]  Hamed Sadighi Dizaji,et al.  Performance and profit analysis of thermoelectric power generators mounted on channels with different cross-sectional shapes , 2020 .

[27]  S. Chander,et al.  Utilizing circular jet impingement to enhance thermal performance of solar air heater , 2020 .

[28]  H. Abdi,et al.  Numerical investigation of laminar flow and heat transfer in a channel using combined nanofluids and novel longitudinal vortex generators , 2020, Journal of Thermal Analysis and Calorimetry.

[29]  Harish Kumar Ghritlahre,et al.  Thermal performance and heat transfer analysis of arc shaped roughened solar air heater – An experimental study , 2020 .

[30]  T. V. Arjunan,et al.  Thermohydraulic performance enhancement of a new hybrid duct solar air heater with inclined rib roughness , 2020 .

[31]  S. S. M. Ajarostaghi,et al.  Numerical evaluation of the thermal performance of a solar air heater equipped with two different types of baffles , 2020, Heat Transfer.

[32]  Radha Krishna Prasad,et al.  Prediction of heat transfer of two different types of roughened solar air heater using Artificial Neural Network technique , 2018, Thermal Science and Engineering Progress.

[33]  N. Pourmahmoud,et al.  Numerical investigation and performance analyses of rectangular mini channel with different types of ribs and their arrangements , 2018, International Journal of Thermal Sciences.

[34]  Ashok Kumar,et al.  Optimization of single arc protrusion ribs parameters in solar air heater with impinging air jets based upon PSI approach , 2018, Thermal Science and Engineering Progress.

[35]  T. V. Arjunan,et al.  Analytical investigation of solar air heater with jet impingement using energy and exergy analysis , 2018 .

[36]  Anil Kumar,et al.  Developing heat transfer and friction loss in an impingement jets solar air heater with multiple arc protrusion obstacles , 2017 .

[37]  Husam Abdulrasool Hasan,et al.  Performance analysis of solar air heater with jet impingement on corrugated absorber plate , 2017 .

[38]  S. Singh,et al.  Experimental analysis of geometrical parameters on the performance of an inline jet plate solar air heater , 2017 .

[39]  K. Srithar,et al.  Experimental investigation on the performance of an impinging jet solar air heater , 2017 .

[40]  S. N. Singh,et al.  Effect of geometrical aspects on the performance of jet plate solar air heater , 2016 .

[41]  Ranchan Chauhan,et al.  Investigation of the thermohydraulic performance of impinging jet solar air heater , 2014 .

[42]  H. P. Garg,et al.  Evaluation of a jet plate solar air heater , 1991 .