A high-efficiency DC-DC buck converter for sub-3×VDD power supply

This paper presents a DC-DC step-down converter, which can accommodate the range of input voltage from VDD to sub-3×VDD voltage. By utilizing stacked power MOSFETs, a voltage level converter, a detector and a controller, the proposed design is realized by a typical 1P6M 0.18 µm CMOS process without using any high voltage process to resolve gate-oxide reliability and leakage current problems. The core area is less than 0.184 mm2, while the VDD range is up to 5 V. Since the internal reference voltage is 1.0 V, it can increase the output regulation range. The proposed design attains very high conversion efficiency to prolong the life time of battery-based power supply. Therefore, it can be integrated in a system chip to provide multiple supply voltage sources.

[1]  Robert W. Erickson,et al.  DC–DC Power Converters , 2007 .

[2]  Gabriel A. Rincon-Mora,et al.  A low-voltage, low quiescent current, low drop-out regulator , 1998, IEEE J. Solid State Circuits.

[3]  Marcelino B. Santos,et al.  Level Shifters and DCVSL for a Low-Voltage CMOS 4.2-V Buck Converter , 2008, IEEE Transactions on Industrial Electronics.

[4]  Ka Nang Leung,et al.  A voltage-mode PWM buck regulator with end-point prediction , 2006, IEEE Transactions on Circuits and Systems II: Express Briefs.

[5]  Ke-Horng Chen,et al.  Hybrid Buck–Boost Feedforward and Reduced Average Inductor Current Techniques in Fast Line Transient and High-Efficiency Buck–Boost Converter , 2010, IEEE Transactions on Power Electronics.

[6]  Mei-Ling Yeh,et al.  A High Efficiency Dual-Mode Buck Converter IC For Portable Applications , 2008, IEEE Transactions on Power Electronics.

[7]  Brian Flynn,et al.  Switched Mode Power Supplies: Design and Construction , 1992 .

[8]  Lu Chen,et al.  Design and test of a synchronous PWM switching regulator system , 2000, IEEE APCCAS 2000. 2000 IEEE Asia-Pacific Conference on Circuits and Systems. Electronic Communication Systems. (Cat. No.00EX394).

[9]  Bruno Murari,et al.  Smart Power ICs , 1996 .

[10]  J. Zhang,et al.  An ultra-low-power digitally-controlled buck converter IC for cellular phone applications , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..

[11]  Feng Luo,et al.  Design of Digital Tri-mode Adaptive-Output Buck–Boost Power Converter for Power-Efficient Integrated Systems , 2010, IEEE Transactions on Industrial Electronics.

[12]  R. Jacob Baker,et al.  CMOS Circuit Design, Layout, and Simulation, Second Edition , 2004 .

[13]  Robert W. Brodersen,et al.  High-efficiency low-voltage dc-dc conversion for portable applications , 1994 .

[14]  Abraham Pressman,et al.  Switching Power Supply Design , 1997 .

[15]  Phillip E Allen,et al.  CMOS Analog Circuit Design , 1987 .

[16]  J. Bongiorno,et al.  An extension of the Nyquist-Barkhausen stability criterion to linear lumped-parameter systems with time-varying elements , 1963 .

[17]  Marty Brown,et al.  Power Supply Cookbook , 1994 .