论文信息 - Optical fiber Fabry-Pérot sensor fabrication based on focused ion beam post-processing

Optical fiber Fabry-Pérot sensor fabrication based on focused ion beam post-processing

A combination of focused ion beam milling and chemical etching is proposed for the creation of Fabry-Pérot cavities in microwires. Both simple cavities and cantilevers are created on 15 μm-diameter microwires and characterized in temperature. The cantilever structure shows sensitivity to vibration and is capable of measuring frequencies in the range 1 Hz – 40 kHz.

[1] Yan-qing Lu,et al. Microfiber-probe-based ultrasmall interferometric sensor. , 2010, Optics letters.

[2] Yan-qing Lu,et al. Demonstration of a compact temperature sensor based on first-order Bragg grating in a tapered fiber probe. , 2011, Optics express.

[3] Szabolcs Deladi,et al. Fiber-Top Cantilevers: A New Generation of Micromachined Sensors for Multipurpose Applications , 2007 .

[4] E. Cibula,et al. Micromachining of Optical Fibers Using Selective Etching Based on Phosphorus Pentoxide Doping , 2011, IEEE Photonics Journal.

[5] Denis Donlagic,et al. Miniature micro-wire based optical fiber-field access device. , 2012, Optics express.

[6] Yan-qing Lu,et al. Miniaturized fiber taper reflective interferometer for high temperature measurement. , 2010, Optics express.

[7] D. Iannuzzi,et al. Fiber-top cantilever: a new generation of micromachined sensors for multipurpose applications , 2006 .

[8] Ampere A. Tseng,et al. Recent developments in micromilling using focused ion beam technology , 2004 .