Modeling of turbulent transport and solidification during continuous ingot casting

[1]  W. Shyy,et al.  Effects of surface tension and buoyancy on continuous ingot solidification , 1991 .

[2]  Shyy Wei,et al.  Effect of Prandtl number on buoyancy-induced transport processes with and without solidification , 1990 .

[3]  B. Launder,et al.  The numerical computation of turbulent flows , 1990 .

[4]  Dan Backman,et al.  Metal-matrix composites and IPM: A modeling perspective , 1990 .

[5]  Sindo Kou,et al.  Thermocapillary flow and melt/solid interfaces in floating-zone crystal growth under microgravity , 1990 .

[6]  Stephen H. Davis,et al.  Hydrodynamic interactions in directional solidification , 1990, Journal of Fluid Mechanics.

[7]  Sergio D. Felicelli,et al.  Thermosolutal convection during dendritic solidification of alloys: Part II. Nonlinear convection , 1989 .

[8]  Marcel Crochet,et al.  Numerical-simulation of Crystal-growth in a Vertical Bridgman Furnace , 1989 .

[9]  Jonathan A. Dantzig,et al.  MODELLING LIQUID-SOLID PHASE CHANGES WITH MELT CONVECTION , 1989 .

[10]  Julian Szekely,et al.  The transient behavior of weldpools with a deformed free surface , 1989 .

[11]  G. Maurer.  3 – Primary and Secondary Melt Processing—Superalloys , 1989 .

[12]  Frank P. Incropera,et al.  Solidification of an aqueous ammonium chloride solution in a rectangular cavity—II. Comparison of predicted and measured results , 1989 .

[13]  Brian Launder,et al.  On the Computation of Convective Heat Transfer in Complex Turbulent Flows , 1988 .

[14]  J. Szekely,et al.  Experimental measurement and numerical computation of velocity and turbulence parameters in a heated liquid metal system , 1988 .

[15]  Christoph Beckermann,et al.  Double-diffusive convection due to melting , 1988 .

[16]  H. L. Grubin,et al.  Numerical simulations of Czochralski silicon growth , 1988 .

[17]  Robert A. Brown,et al.  Theory of transport processes in single crystal growth from the melt , 1988 .

[18]  Wei Shyy,et al.  Computation of complex fluid flows using an adaptive grid method , 1988 .

[19]  Sanjay M. Correa,et al.  Computation of Flow in a Gas Turbine Combustor , 1988 .

[20]  Julian Szekely,et al.  Mathematical and physical modelling of doublediffusive convection of aqueous solutions crystallizing at a vertical wall , 1988, Journal of Fluid Mechanics.

[21]  Wei Shyy,et al.  Applications of a generalized pressure correction algorithm for flows in complicated geometries , 1988 .

[22]  V. Voller,et al.  A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems , 1987 .

[23]  V. C. Patel,et al.  Turbulence models for near-wall and low Reynolds number flows - A review , 1985 .

[24]  Wei Shyy,et al.  Numerical Recirculating Flow Calculation Using a Body-Fitted Coordinate System , 1985 .

[25]  M. Mclean,et al.  Solidification morphologies in directionally solidified superalloys , 1984 .

[26]  S. Ostrach.  Fluid Mechanics in Crystal Growth—The 1982 Freeman Scholar Lecture , 1983 .

[27]  Klaus Bremhorst,et al.  A Modified Form of the k-ε Model for Predicting Wall Turbulence , 1981 .

[28]  F. Rosenberger,et al.  Fundamentals of Crystal Growth I , 1979 .

[29]  B. Launder,et al.  Application of the energy-dissipation model of turbulence to the calculation of flow near a spinning disc , 1974 .

[30]  A. Mitchell,et al.  The thermal characteristics of the electroslag process , 1973 .

[31]  W. Jones,et al.  The prediction of laminarization with a two-equation model of turbulence , 1972 .