The effects of nanoclay on the extrusion foaming of wood fiber/polyethylene nanocomposites

This article presents the foaming behaviors of wood fiber/high density polyethylene (HDPE) composites with small amounts of nanoclay. Melt compounding is used to prepare two types of clay-filled wood fiber composites: intercalated and exfoliated clay composites. Their respective morphologies are determined using wide-angle X-ray diffraction (XRD) and transmission electron microscopy (TEM). We subsequently conduct an extrusion foaming experiment of the composites using N2 as the blowing agent. Varying the wood fiber content, as well as the processing parameters, such as temperature and pressure, the effects of different amounts of clay and the degree of exfoliation on the final cell morphology and the foam density of the wood fiber/HDPE/clay nanocomposite foams are studied. The results suggested that the addition of nanoclay improved the cell morphology of the wood fiber/HDPE composite foams as its content and degree of dispersion increased. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers

[1]  Chul B. Park,et al.  Use of nanoparticles for improving the foaming behaviors of linear PP , 2010 .

[2]  Chul B. Park,et al.  Effects of nanoparticles on the density reduction and cell morphology of extruded metallocene polyethylene/wood fiber nanocomposites , 2007 .

[3]  Chul B. Park,et al.  Effects of clay dispersion on the foam morphology of LDPE/clay nanocomposites , 2007 .

[4]  B. Riedl,et al.  Preparation and morphology of polypropylene/wood flour composite foams via extrusion , 2005 .

[5]  G. Rizvi,et al.  Critical Issues in Extrusion Foaming of Plastic/Woodfiber Composites , 2005 .

[6]  Chul B. Park,et al.  HDPE-Clay Nanocomposite Foams Blown with Supercritical CO2 , 2005 .

[7]  Chul B. Park,et al.  Critical processing temperature in the manufacture of fine‐celled plastic/wood‐fiber composite foams , 2004 .

[8]  Chul B. Park,et al.  Expansion mechanisms of plastic/wood-flour composite foams with moisture, dissolved gaseous volatiles, and undissolved gas bubbles , 2003 .

[9]  L. Matuana,et al.  Foam extrusion of high density polyethylene/wood-flour composites using chemical foaming agents , 2003 .

[10]  S. Ray,et al.  Well-controlled biodegradable nanocomposite foams: From microcellular to nanocellular , 2003 .

[11]  G. Rizvi,et al.  A Novel System Design for Continuous Processing of Plastic/Wood-Fiber Composite Foams with Improved Cell Morphology , 2002 .

[12]  T. Kotaka,et al.  Foam processing and cellular structure of polypropylene/clay nanocomposites , 2002 .

[13]  C. Koo,et al.  Synthesis and characterization of maleated polyethylene/clay nanocomposites , 2001 .

[14]  T. Kotaka,et al.  A House of Cards Structure in Polypropylene/Clay Nanocomposites under Elongational Flow , 2001 .

[15]  Sumarno,et al.  Solubilities and diffusion coefficients of carbon dioxide and nitrogen in polypropylene, high-density polyethylene, and polystyrene under high pressures and temperatures , 1999 .

[16]  Chul B. Park,et al.  Cell morphology and property relationships of microcellular foamed pvc/wood‐fiber composites , 1998 .

[17]  R. D. Venter,et al.  Low density microcellular foam processing in extrusion using CO2 , 1998 .

[18]  Emmanuel P. Giannelis,et al.  Polymer Layered Silicate Nanocomposites , 1996 .

[19]  Dimitris I. Collais,et al.  Tesile toughness of microcellular foams of polystyrene, styrene‐acrylonitrile copolymer, and polycarbonate, and the effect of dissolved gas on the tensile toughness of the same polymer matrices and microcellular foams , 1995 .

[20]  D. Baird,et al.  Impact toughening of polycarbonate by microcellular foaming , 1994 .

[21]  Jonathan S. Colton,et al.  Nucleation of microcellular foam: Theory and practice , 1987 .

[22]  J. Waldman.  Striped bass in Gregory's «fish skulls» actually a grouper , 1984 .