Cavity pressure control during cooling in plastic injection molding

Cavity pressure control during filling, packing, and cooling phases is imperative for maintaining product quality in injection molding process. This paper presents the design and implementation of a strategy to control cavity pressure profile during the cooling phase. In order to do this, a controlled variable parameter was defined to be the time constant τ of the pressure profile. This parameter can be used effectively to control the shape of the cavity pressure over the cooling cycle. The coolant flow rate through the mold was used as the manipulated variable. A predictive control system was designed and implemented successfully to allow monitoring and control of τ at several setpoints τsp resulting in good and effective cavity pressure control. © 2006 Wiley Periodicals, Inc. Adv Polym Techn 25:170–181, 2006; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/adv.20068

[1]  W. I. Patterson,et al.  Cavity pressure control during the cooling stage in thermoplastic injection molding , 1996 .

[2]  R. Dubay.  Self-optimizing MPC of melt temperature in injection moulding. , 2002, ISA transactions.

[3]  W. I. Patterson,et al.  An injection molding study. Part I: Melt and barrel temperature dynamics , 1986 .

[4]  Yash P. Gupta.  Characteristic equations and robust stability of a simplified predictive control algorithm , 1993 .

[5]  P. Deshpande,et al.  Advanced process control for injection molding , 1991 .

[6]  W. I. Patterson,et al.  Dynamics and control of pressure in the injection molding of thermoplastics , 1987 .

[7]  Gregory A. Campbell,et al.  An experimental and theoretical investigation of transient melt temperature during injection molding , 1991 .

[8]  W. I. Patterson,et al.  An injection molding study. Part II: Evaluation of alternative control strategies for melt temperature , 1986 .

[9]  Kok Kiong Tan,et al.  Adaptive GPC Control of Melt Temperature in Injection Moulding , 1999, IIA/SOCO.

[10]  Douglas J. Cooper,et al.  Pattern‐based closed‐loop quality control for the injection molding process , 1997 .

[11]  Furong Gao,et al.  Dynamics and Control of Surface and Mold Temperatures in Injection Molding , 1993 .

[12]  Self‐tuning cavity pressure control of injection molding filling , 1994 .

[13]  Y. Gupta,et al.  Control of plastic melt temperature: A multiple input multiple output model predictive approach , 1997 .

[14]  Michael Pecht,et al.  Injection Molding Process Control - A Review. , 1987 .

[15]  Rickey Dubay,et al.  A generic controller for part surface temperature on a plastic injection molding machine , 2006 .