Synthesis and characterization of graphene-modified experimental adhesive system for bonding two-piece zirconia abutments: Electron microscopy and Raman spectroscopic analysis

[1]  Sultan Aati,et al.  Formulation of pH-sensitive chlorhexidine-loaded/mesoporous silica nanoparticles modified experimental dentin adhesive. , 2021, Materials science & engineering. C, Materials for biological applications.

[2]  J. Iqbal,et al.  Anti‐bacterial and wound healing‐promoting effects of zinc ferrite nanoparticles , 2021, Journal of Nanobiotechnology.

[3]  Sultan Aati,et al.  pH-dependent delivery of chlorhexidine from PGA grafted mesoporous silica nanoparticles at resin-dentin interface , 2020, Journal of Nanobiotechnology.

[4]  Fahim Vohra,et al.  Influence of graphene oxide filler content on the dentin bond integrity, degree of conversion and bond strength of experimental adhesive. A SEM, micro-Raman, FTIR and microtensile study , 2020, Materials Research Express.

[5]  Fahim Vohra,et al.  Graphene oxide nano-filler based experimental dentine adhesive. A SEM / EDX, Micro-Raman and microtensile bond strength analysis , 2020, Journal of applied biomaterials & functional materials.

[6]  Yu-Fu Shen,et al.  Clinical evaluation of two-piece zirconia abutments with bonded titanium inserts for implant-supported restorations. , 2020, The Journal of prosthetic dentistry.

[7]  D. Divakar,et al.  Graphene oxide-based experimental silane primers enhance shear bond strength between resin composite and zirconia. , 2019, European journal of oral sciences.

[8]  H. Mackey,et al.  Effect of Graphene Oxide Synthesis Method on Properties and Performance of Polysulfone-Graphene Oxide Mixed Matrix Membranes , 2019, Nanomaterials.

[9]  A. Centeno,et al.  Probing the mechanical properties of vertically-stacked ultrathin graphene/Al2O3 heterostructures , 2019, Nanotechnology.

[10]  P. Vallittu,et al.  Static and dynamic mechanical properties of graphene oxide-based bone cementing agents , 2019, Journal of Composite Materials.

[11]  Seog-Young Yoon,et al.  Enamel Anti-Demineralization Effect of Orthodontic Adhesive Containing Bioactive Glass and Graphene Oxide: An In-Vitro Study , 2018, Materials.

[12]  W. Siqueira,et al.  Esterase from a cariogenic bacterium hydrolyzes dental resins. , 2018, Acta biomaterialia.

[13]  S. Mohanty,et al.  Comparison of mechanical, electrical and thermal properties in graphene oxide and reduced graphene oxide filled epoxy nanocomposite adhesives , 2018 .

[14]  H. Kim,et al.  Nano-graphene oxide incorporated into PMMA resin to prevent microbial adhesion. , 2018, Dental materials : official publication of the Academy of Dental Materials.

[15]  J. Matinlinna,et al.  Enhanced resin zirconia adhesion with carbon nanotubes-infused silanes: A pilot study , 2018 .

[16]  N. Alharthi,et al.  Physical, mechanical, chemical and thermal properties of nanoscale graphene oxide-poly methylmethacrylate composites , 2018 .

[17]  D. V. Cesar,et al.  Solvothermal Reduction of Graphite Oxide Using Alcohols , 2017 .

[18]  Kateryna Bazaka,et al.  Review on the Antimicrobial Properties of Carbon Nanostructures , 2017, Materials.

[19]  J. Seidt,et al.  Load to failure of different zirconia implant abutments with titanium components , 2017, The Journal of prosthetic dentistry.

[20]  J. Matinlinna,et al.  Enhanced resin titanium adhesion with silane primers using tribochemical silica-coating. , 2017, Dental materials journal.

[21]  P. Kohorst,et al.  Retention Forces between Titanium and Zirconia Components of Two-Part Implant Abutments with Different Techniques of Surface Modification. , 2016, Clinical implant dentistry and related research.

[22]  P. Pongprueksa,et al.  Effect of thermocycling on the durability of etch-and-rinse and self-etch adhesives on dentin. , 2016, Dental materials journal.

[23]  K. Ogawa,et al.  Graphene oxide scaffold accelerates cellular proliferative response and alveolar bone healing of tooth extraction socket , 2016, International journal of nanomedicine.

[24]  G. de Souza,et al.  Are Zirconia Implant Abutments Safe and Predictable in Posterior Regions? A Systematic Review and Meta-Analysis. , 2016, International Journal of Prosthodontics.

[25]  K. Sadasivuni,et al.  Eco-Friendly Synthesis of Graphene Oxide Reinforced Hydroxypropyl Methylcellulose/Polyvinyl Alcohol Blend Nanocomposites Filled with Zinc Oxide Nanoparticles for High-k Capacitor Applications , 2016 .

[26]  Irena Sailer,et al.  Eleven-Year Follow-Up of a Prospective Study of Zirconia Implant Abutments Supporting Single All-Ceramic Crowns in Anterior and Premolar Regions. , 2015, Clinical implant dentistry and related research.

[27]  M. Gaintantzopoulou,et al.  Effect of Thermocycling, Degree of Conversion, and Cavity Configuration on the Bonding Effectiveness of All-in-One Adhesives. , 2015, Operative dentistry.

[28]  Yachong Guo,et al.  Graphene Induces Formation of Pores That Kill Spherical and Rod-Shaped Bacteria. , 2015, ACS nano.

[29]  Kalim Deshmukh,et al.  Highly dispersible graphene oxide reinforced polypyrrole/polyvinyl alcohol blend nanocomposites with high dielectric constant and low dielectric loss , 2015 .

[30]  Xiaodan Zhu,et al.  Killing dental pathogens using antibacterial graphene oxide. , 2015, ACS applied materials & interfaces.

[31]  F. Rueggeberg,et al.  The effect of photopolymerization on the degree of conversion, polymerization kinetic, biaxial flexure strength, and modulus of self-adhesive resin cements. , 2015, The Journal of prosthetic dentistry.

[32]  Zhiping Xu,et al.  Wetting of graphene oxide: a molecular dynamics study. , 2014, Langmuir : the ACS journal of surfaces and colloids.

[33]  Nelson Durán,et al.  Nanotoxicity of graphene and graphene oxide. , 2014, Chemical research in toxicology.

[34]  N. Silikas,et al.  Degree of conversion of bulk-fill compared to conventional resin-composites at two time intervals. , 2013, Dental materials : official publication of the Academy of Dental Materials.

[35]  E. Rafiei,et al.  Effect of thermocycling and water storage on bond longevity of two self-etch adhesives. , 2013, General dentistry.

[36]  A. Adnan,et al.  Role of nanoparticle dispersion and filler-matrix interface on the matrix dominated failure of rigid C60-PE nanocomposites: A molecular dynamics simulation study , 2013 .

[37]  V. Mortazavi,et al.  Shear Bond Strengths and Morphological Evaluation of Filled and Unfilled Adhesive Interfaces to Enamel and Dentine , 2012, International journal of dentistry.

[38]  S. Geraldeli,et al.  Durability of bonds and clinical success of adhesive restorations. , 2012, Dental materials : official publication of the Academy of Dental Materials.

[39]  Anders Ekfeldt,et al.  Zirconia abutments for single-tooth implant restorations: a retrospective and clinical follow-up study. , 2011, Clinical oral implants research.

[40]  Jing Kong,et al.  Antibacterial activity of graphite, graphite oxide, graphene oxide, and reduced graphene oxide: membrane and oxidative stress. , 2011, ACS nano.

[41]  Kavitha Sanjeev,et al.  Degree of conversion of two dentin bonding agents with and without a desensitizing agent using fourier transform infrared spectroscopy: An in vitro study , 2011, Journal of Conservative Dentistry.

[42]  G. Ambrosano,et al.  Influence of curing mode and time on degree of conversion of one conventional and two self-adhesive resin cements. , 2010, Operative dentistry.

[43]  Moustafa N. Aboushelib,et al.  Zirconia implant abutment fracture: clinical case reports and precautions for use. , 2009, The International journal of prosthodontics.

[44]  E. Hellwig,et al.  Curing efficiency of four self-etching, self-adhesive resin cements. , 2009, Dental materials : official publication of the Academy of Dental Materials.

[45]  A. Misra,et al.  Relationship of solvent to the photopolymerization process, properties, and structure in model dentin adhesives. , 2007, Journal of biomedical materials research. Part A.

[46]  J. Matinlinna,et al.  An introduction to silanes and their clinical applications in dentistry. , 2004, The International journal of prosthodontics.

[47]  M. Miyazaki,et al.  Determination of residual double bonds in resin-dentin interface by Raman spectroscopy. , 2003, Dental materials : official publication of the Academy of Dental Materials.

[48]  J. Ferracane,et al.  Solvent Degradation and Reduced Fracture Toughness in Aged Composites , 1992, Journal of dental research.

[49]  S. Kalachandra.  Influence of fillers on the water sorption of composites. , 1989, Dental materials : official publication of the Academy of Dental Materials.

[50]  J L Ferracane,et al.  Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins. , 1985, Dental materials : official publication of the Academy of Dental Materials.