Development and validation of a new turbocharger simulation methodology for marine two stroke diesel engine modelling and diagnostic applications

Engine cycle simulation models are increasingly used in diesel engine simulation and diagnostic applications, reducing experimental effort. Turbocharger simulation plays an important role in model's ability to accurately predict engine performance and emissions.

[1]  Dimitrios T. Hountalas,et al.  Prediction of marine diesel engine performance under fault conditions , 2000 .

[2]  Robert C. Juvinall,et al.  Fundamentals of machine component design , 1983 .

[3]  Jens Honore Walther,et al.  Numerical analysis of the scavenge flow and convective heat transfer in large two-stroke marine diesel engines , 2014 .

[4]  Ricardo Martinez-Botas,et al.  The Pulsating Flow Field in a Mixed Flow Turbocharger Turbine: An Experimental and Computational Study , 2004 .

[5]  Miloud Abidat,et al.  Prediction of the steady and non-steady flow performance of a highly loaded mixed flow turbine , 1998 .

[6]  Vincent Talon,et al.  Implementing Turbomachinery Physics into Data Map-Based Turbocharger Models , 2009 .

[7]  Ilya Kolmanovsky,et al.  Turbocharger Modeling for Automotive Control Applications , 1999 .

[8]  C. D. Rakopoulos,et al.  A fast algorithm for calculating the composition of diesel combustion products using 11 species chemical equilibrium scheme , 1994 .

[9]  Francisco José Arnau,et al.  A model of turbocharger radial turbines appropriate to be used in zero- and one-dimensional gas dynamics codes for internal combustion engines modelling , 2008 .

[10]  Ricardo Martinez-Botas,et al.  Performance prediction of a nozzled and nozzleless mixed-flow turbine in steady conditions , 2011 .

[11]  Fredrik Haglind,et al.  Validation of a zero-dimensional model for prediction of NOx and engine performance for electronically controlled marine two-stroke diesel engines , 2012 .

[12]  Xiande Fang,et al.  Empirical models for efficiency and mass flow rate of centrifugal compressors , 2014 .

[13]  Dimitrios T. Hountalas,et al.  Application of a multi-zone combustion model to investigate the NOx reduction potential of two-stroke marine diesel engines using EGR , 2015 .

[14]  Srithar Rajoo,et al.  Engine turbocharger performance prediction: One-dimensional modeling of a twin entry turbine , 2012 .

[15]  Kangyao Deng,et al.  Modeling and extrapolating mass flow characteristics of a radial turbocharger turbine , 2015 .

[16]  Pierre Podevin,et al.  Experimental identification of turbocharger mechanical friction losses , 2012 .

[17]  Hui Chen,et al.  Computational investigation of a large containership propulsion engine operation at slow steaming conditions , 2014 .

[18]  Evangelos G. Giakoumis,et al.  Review of Thermodynamic Diesel Engine Simulations under Transient Operating Conditions , 2006 .

[19]  Dimitrios T. Hountalas,et al.  Multi-Zone Combustion Modeling as a Tool for DI Diesel Engine Development – Application for the Effect of Injection Pressure , 2004 .

[20]  Peter F. Pelz,et al.  Physical Modeling of Automotive Turbocharger Compressor: Analytical Approach and Validation , 2011 .

[21]  Ricardo Martinez-Botas,et al.  Turbocharger matching methodology for improved exhaust energy recovery , 2012 .

[22]  Luis Miguel García-Cuevas,et al.  Characterization of a radial turbocharger turbine in pulsating flow by means of CFD and its application to engine modeling , 2013 .

[23]  Alessandro Romagnoli,et al.  Characterisation of a low pressure turbine for turbocompounding applications in a heavily downsized mild-hybrid gasoline engine , 2014 .

[24]  Dimitrios T. Hountalas,et al.  Validation of Multi-Zone Combustion Model Ability to Predict Two Stroke Diesel Engine Performance and NOx Emissions Using on Board Measurements , 2012 .

[25]  Dimitrios T. Hountalas,et al.  Meanline Modeling of Radial Turbine Performance for Turbocharger Simulation and Diagnostic Applications , 2013 .

[26]  C. D. Rakopoulos,et al.  Application of a Multi-Zone Combustion Model for the Prediction of Large Scale Marine Diesel Engines Performance and Pollutants Emissions , 1999 .

[27]  Francisco José Arnau,et al.  External heat losses in small turbochargers: Model and experiments , 2014 .

[28]  Rongchao Zhao,et al.  Parametric study of power turbine for diesel engine waste heat recovery , 2014 .

[29]  Luis Miguel García-Cuevas,et al.  Development and validation of a radial variable geometry turbine model for transient pulsating flow applications , 2014 .

[30]  U. Okapuu,et al.  A Mean Line Prediction Method for Axial Flow Turbine Efficiency , 1982 .

[31]  Y. L. Xu,et al.  Development of an empirical model of turbine efficiency using the Taylor expansion and regression an , 2011 .

[32]  Xiande Fang,et al.  Modeling of turbine mass flow rate performances using the Taylor expansion , 2010 .

[33]  Dimitrios T. Hountalas,et al.  Using a Phenomenological Multi-Zone Model to Investigate the Effect of Injection Rate Shaping on Performance and Pollutants of a DI Heavy Duty Diesel Engine , 2002 .

[34]  Dieter Bohn,et al.  A comparative throughflow analysis of axial flow turbines , 1998 .

[35]  Ron Zevenhoven,et al.  Large-scale diesel engine emission control parameters , 2010 .

[36]  J. Dunham,et al.  Improvements to the Ainley-Mathieson Method of Turbine Performance Prediction , 1970 .

[37]  Srithar Rajoo,et al.  Integration of meanline and one-dimensional methods for prediction of pulsating performance of a turbocharger turbine , 2014 .

[38]  N. Watson,et al.  Turbocharging the internal combustion engine , 1982 .

[39]  Christos Katsanos,et al.  Simulation of a heavy-duty diesel engine with electrical turbocompounding system using operating charts for turbocharger components and power turbine , 2013 .

[40]  Junqiang Zhu,et al.  Improved Profile Loss and Deviation Correlations for Axial-Turbine Blade Rows , 2005 .

[41]  John D Stanitz.  One-dimensional compressible flow in vaneless diffusers of radial- and mixed-flow centrifugal compressors, including effects of friction, heat transfer and area change , 1952 .

[42]  Ricardo Martinez-Botas,et al.  Pulse Performance Modeling of a Twin Entry Turbocharger Turbine Under Full and Unequal Admission , 2011 .

[43]  H W Oh,et al.  An optimum set of loss models for performance prediction of centrifugal compressors , 1997 .

[44]  David Japikse.  Turbomachinery Performance Modeling , 2009 .

[45]  Fadila Maroteaux,et al.  Diesel engine combustion modeling for hardware in the loop applications: Effects of ignition delay time model , 2013 .

[46]  Lars Eriksson,et al.  Modeling and Control of Turbocharged SI and DI Engines , 2007 .

[47]  John B. Heywood,et al.  Two-Stroke Cycle Engine: It's Development, Operation and Design , 1999 .

[48]  A. Whitfield,et al.  Design of radial turbomachines , 1990 .

[49]  Alain Lefebvre,et al.  Theoretical and experimental study of mechanical losses in automotive turbochargers , 2013 .

[50]  Dimitrios T. Hountalas,et al.  DEVELOPMENT AND VALIDATION OF A 3-D MULTI-ZONE COMBUSTION MODEL FOR THE PREDICTION OF DI DIESEL ENGINES PERFORMANCE AND POLLUTANTS EMISSIONS , 1998 .

[51]  A. J. Glassman,et al.  FORTRAN program for predicting off-design performance of radial-inflow turbines , 1975 .

[52]  Xuwen Qiu,et al.  A New Slip Factor Model for Axial and Radial Impellers , 2007 .

[53]  Weilin Zhuge,et al.  Development of an advanced turbocharger simulation method for cycle simulation of turbocharged internal combustion engines , 2009 .