Determination of the Strain Influence on the InAs/InAsSb Type-II Superlattice Effective Masses

A3B5 materials used for the superlattice (SL) fabrication have properties that enable the design of devices optimized for infrared (IR) detection. These devices are used in the military, industry, medicine and in other areas of science and technology. The paper presents the theoretical assessment and analysis of the InAs/InAs1−xSbx type-II superlattice (T2SL) (grown on GaSb buffer layer) strain impact on the bandgap energy and on the effective masses of electrons and holes at 150 K. The theoretical research was carried out with the use of the commercial program SimuApsys (Crosslight). The k·p method was adopted in T2SL modeling. Luttinger coefficients (γ1, γ2 and γ3) were assessed assuming the Kane coefficient F = 0. The bandgap energy of ternary materials (InAsxSb1−x) was determined assuming that the bowing parameter (bg) for the above-mentioned temperature is bg = 750 meV. The cutoff wavelength values were estimated based on the theoretically determined absorption coefficients (from approximation the quadratic absorption coefficient). The bandgap energy was calculated according to the following formula: Eg = 1.24/λcutoff. The theoretical simulations allowed us to conclude that the strain in T2SL causes the Eg shift, which also has an impact on the effective masses me and mh, playing an important role for the device’s optical and electrical performance. The T2SLs-simulated results at 150 K are comparable to those measured experimentally.

[1]  P. Martyniuk,et al.  Theoretical Study of the Effect of Stresses on Effective Masses in the InAs/InAsSb Type-II Superlattice , 2022, I3S2022Warsaw.

[2]  K. Grodecki,et al.  Method of electron affinity evaluation for the type-2 InAs/InAs1−xSbx superlattice , 2020, Journal of Materials Science.

[3]  A. Rogalski,et al.  Bandgap energy determination of InAsSb epilayers grown by molecular beam epitaxy on GaAs substrates , 2019, Progress in Natural Science: Materials International.

[4]  Krzysztof Murawski,et al.  InAs/InAsSb Strain-Balanced Superlattices for Longwave Infrared Detectors , 2019, Sensors.

[5]  D. Ting,et al.  Type-II superlattice hole effective masses , 2017 .

[6]  Alexander Soibel,et al.  Hole effective masses and subband splitting in type-II superlattice infrared detectors , 2016 .

[7]  R. Synowicki,et al.  Measurement of InAsSb bandgap energy and InAs/InAsSb band edge positions using spectroscopic ellipsometry and photoluminescence spectroscopy , 2015 .

[8]  Steve Grossman,et al.  Modeling InAs/GaSb and InAs/InAsSb Superlattice Infrared Detectors , 2014, Journal of Electronic Materials.

[9]  Nicolas Fressengeas,et al.  Bandgap energy bowing parameter of strained and relaxed InGaN layers , 2014 .

[10]  Elena Plis,et al.  InAs/GaSb Type-II Superlattice Detectors , 2014 .

[11]  Z. Q. Li,et al.  Finite difference k.p modeling of type II MQWs , 2013, 2013 13th International Conference on Numerical Simulation of Optoelectronic Devices (NUSOD).

[12]  Elena Plis,et al.  Gallium free type II InAs/InAsxSb1-x superlattice photodetectors , 2012 .

[13]  Michael T. Eismann,et al.  Design and modeling of InAs/GaSb type II superlattice based dual-band infrared detectors , 2012 .

[14]  S. Krishna,et al.  InAs/InAsSb strain balanced superlattices for optical detectors: Material properties and energy band simulations , 2012 .

[15]  B. Laikhtman,et al.  In-plane and growth direction electron cyclotron effective mass in short period InAs/GaSb semiconductor superlattices , 2011 .

[16]  M. Bugajski,et al.  Electronic States in Type-II Superlattices , 2009 .

[17]  L. Voon,et al.  The k p Method: Electronic Properties of Semiconductors , 2009 .

[18]  H. Aourag,et al.  Effective masses of electrons and heavy holes in InAs, InSb, GaSb, GaAs and some of their ternary compounds , 1999 .

[19]  P. Paskov Refractive indices of InSb, InAs, GaSb, InAsxSb1−x, and In1−xGaxSb: Effects of free carriers , 1997 .

[20]  L. Ekstrom,et al.  Semiconducting Properties of InSb–InAs Alloys , 1968 .

[21]  Matthias Ehrhardt,et al.  Multi-Band Effective Mass Approximations , 2014 .

[22]  A. Rogalski,et al.  Intrinsic carrier concentration and effective masses in InAs1−xSbx , 1989 .