Control-oriented dynamic process optimization of solid oxide electrolysis cell system with the gas characteristic regarding oxygen electrode delamination

[1]  Jongsup Hong,et al.  A review of solid oxide steam-electrolysis cell systems: Thermodynamics and thermal integration , 2022, Applied Energy.

[2]  L. Yang,et al.  Effects of methane steam reforming on the mechanical stability of solid oxide fuel cell stack , 2022, Applied Energy.

[3]  Dong-qi Zhao,et al.  Modeling and analysis of cross-flow solid oxide electrolysis cell with oxygen electrode/electrolyte interface oxygen pressure characteristics for hydrogen production , 2022, Journal of Power Sources.

[4]  H. Frandsen,et al.  Modelling of local mechanical failures in solid oxide cell stacks , 2021, Applied Energy.

[5]  Zhonghua Zhu,et al.  Air electrodes and related degradation mechanisms in solid oxide electrolysis and reversible solid oxide cells , 2021 .

[6]  Marco Sorrentino,et al.  Mechanism model-based and data-driven approach for the diagnosis of solid oxide fuel cell stack leakage , 2021 .

[7]  N. Rispoli,et al.  On the use of dynamic programming for optimal energy management of grid-connected reversible solid oxide cell-based renewable microgrids , 2021 .

[8]  Yashar S. Hajimolana,et al.  Dynamic modelling of reversible solid oxide cells for grid stabilization applications , 2021, Energy Conversion and Management.

[9]  W. Zhuge,et al.  A review of heat transfer and thermal management methods for temperature gradient reduction in solid oxide fuel cell (SOFC) stacks , 2020 .

[10]  M. Ni,et al.  Dynamic behaviour and control strategy of high temperature proton exchange membrane electrolyzer cells (HT-PEMECs) for hydrogen production , 2020 .

[11]  Filippo Berto,et al.  Transient system-level performance and thermo-mechanical stress analysis of a solid oxide fuel cell-based power generation plant with a multi-physics approach , 2020, Comput. Chem. Eng..

[12]  M. Mehrpooya,et al.  Thermo-economic analysis of a solar-driven multi-stage desalination unit equipped with a phase change material storage system to provide heating and fresh water for a residential complex , 2020 .

[13]  Jianhua Jiang,et al.  Thermoelectrical-based fuel adaptability analysis of solid oxide fuel cell system and fuel conversion rate prediction , 2020, Energy Conversion and Management.

[14]  P. Voorhees,et al.  The oxygen partial pressure in solid oxide electrolysis cells with multilayer electrolytes , 2020, Acta Materialia.

[15]  Ming Liu,et al.  Dynamic modeling and parameter analysis study on reversible solid oxide cells during mode switching transient processes , 2020, Applied Energy.

[16]  E. Reznicek,et al.  Reversible solid oxide cell systems for integration with natural gas pipeline and carbon capture infrastructure for grid energy management , 2020 .

[17]  B. Ghorbani,et al.  Novel integrated structure using solar parabolic dish collectors for liquid nitrogen production on offshore gas platforms (exergy and economic analysis) , 2020 .

[18]  Xiaowei Fu,et al.  Health state prediction and analysis of SOFC system based on the data-driven entire stage experiment , 2019, Applied Energy.

[19]  P. Aravind,et al.  Dynamic modeling of reversible solid oxide cell stack and control strategy development , 2019, Energy Conversion and Management.

[20]  M. Ni,et al.  Integration of reversible solid oxide cells with methane synthesis (ReSOC-MS) in grid stabilization: A dynamic investigation , 2019, Applied Energy.

[21]  J. Brouwer,et al.  Dynamic Behavior of a Solid Oxide Steam Electrolyzer System Using Transient Photovoltaic Generated Power for Renewable Hydrogen Production , 2018, Journal of Electrochemical Energy Conversion and Storage.

[22]  Qiang Hu,et al.  Optimization of Hydrogen Yield of a High-Temperature Electrolysis System with Coordinated Temperature and Feed Factors at Various Loading Conditions: A Model-Based Study , 2018, Applied Energy.

[23]  M. Sadeghzadeh,et al.  Developing a tri-generation system of power, heating, and freshwater (for an industrial town) by using solar flat plate collectors, multi-stage desalination unit, and Kalina power generation cycle , 2018, Energy Conversion and Management.

[24]  Đ. juričić,et al.  Modelling of anode delamination in solid oxide electrolysis cell and analysis of its effects on electrochemical performance , 2018 .

[25]  Werner Lehnert,et al.  Performance and degradation of an SOEC stack with different cell components , 2017 .

[26]  Kook-Young Ahn,et al.  Dynamic modeling of solid oxide fuel cell and engine hybrid system for distributed power generation , 2017 .

[27]  Jian Li,et al.  Control-oriented modeling analysis and optimization of planar solid oxide fuel cell system , 2016 .

[28]  F. Jabbari,et al.  Investigation of thermal control for different SOFC flow geometries , 2016 .

[29]  L. Barelli,et al.  SOFC regulation at constant temperature: Experimental test and data regression study , 2016 .

[30]  Mogens Bjerg Mogensen,et al.  Understanding degradation of solid oxide electrolysis cells through modeling of electrochemical potential profiles , 2016 .

[31]  Lin Zhang,et al.  Control strategy for power management, efficiency-optimization and operating-safety of a 5-kW solid oxide fuel cell system , 2015 .

[32]  Jianhua Jiang,et al.  Modeling and Model-based Analysis of a Solid Oxide Fuel Cell Thermal-Electrical Management System with an Air Bypass Valve , 2015 .

[33]  Xi Li,et al.  Dynamic modeling and analysis of a 5-kW solid oxide fuel cell system from the perspectives of cooperative control of thermal safety and high efficiency , 2015 .

[34]  Zhonghua Deng,et al.  A nonlinear sliding mode observer for the estimation of temperature distribution in a planar solid oxide fuel cell , 2015 .

[35]  Nigel P. Brandon,et al.  Optimal control strategies for hydrogen production when coupling solid oxide electrolysers with intermittent renewable energies , 2014 .

[36]  P. Kazempoor,et al.  Model validation and performance analysis of regenerative solid oxide cells: Electrolytic operation , 2014 .

[37]  S. Jiang,et al.  A model for the delamination kinetics of La0.8Sr0.2MnO3 oxygen electrodes of solid oxide electrolysis cells , 2012 .

[38]  S. Rashkeev,et al.  Control of Oxygen Delamination in Solid Oxide Electrolyzer Cells via Modifying Operational Regime , 2011 .

[39]  A. Virkar.  Mechanism of oxygen electrode delamination in solid oxide electrolyzer cells , 2010 .

[40]  Nigel P. Brandon,et al.  Hydrogen production through steam electrolysis: Model-based dynamic behaviour of a cathode-supported intermediate temperature solid oxide electrolysis cell , 2008 .

[41]  Y. Inui,et al.  Analytical investigation on cell temperature control method of planar solid oxide fuel cell , 2006 .

[42]  Meihong Wang,et al.  Long-term performance prediction of solid oxide electrolysis cell (SOEC) for CO2/H2O co-electrolysis considering structural degradation through modelling and simulation , 2022, Chemical Engineering Journal.

[43]  A. Virkar,et al.  Modeling of Oxygen Chemical Potential Distribution in Solid Oxide Electrolyzer Cells , 2019, Journal of The Electrochemical Society.