The axial momentum theory as applied to wind turbines: some exact solutions of the flow through a rotor with radially variable load

Abstract The paper gives the exact solutions of the equations involved in the axial momentum theory for several kinds of radially variable load distributions. Specifically, a relation between the power and thrust coefficients is obtained for a load distribution of polynomial type well representing physically relevant loads. The paper also analyses simpler loads of the trapezoidal, triangular and linear type. The mass flow swallowed by the rotor is also evaluated for all cases. By providing a set of exact solutions of the axial momentum theory for rather complex load shapes, the study offers the unique opportunity to verify the correctness of existing or new numerical methods based on the actuator disk approach for other than the trivial, though widely used, uniform load solution.

[1]  R. Bontempo,et al.  Solution of the flow over a non-uniform heavily loaded ducted actuator disk , 2013, Journal of Fluid Mechanics.

[2]  Stefan Ivanell,et al.  Validation of the actuator line method using near wake measurements of the MEXICO rotor , 2015 .

[3]  Jens Nørkær Sørensen,et al.  Rotor theories by Professor Joukowsky: Momentum theories , 2015 .

[4]  Jens Nørkær Sørensen,et al.  A MODEL FOR UNSTEADY ROTOR AERODYNAMICS , 1995 .

[5]  H. Madsen.  A CFD analysis of the actuator disc flow compared with momentum theory results , 1997 .

[6]  Maureen Hand,et al.  Unsteady Aerodynamics Experiment Phase VI: Wind Tunnel Test Con gurations and Available Data Campaigns , 2001 .

[7]  Gk Politis,et al.  Performance prediction method for ducted medium loaded horizontal axis windturbines , 1995 .

[8]  Shigeo Yoshida,et al.  An extension of the Generalized Actuator Disc Theory for aerodynamic analysis of the diffuser-augmented wind turbines , 2015 .

[9]  Bernardo Fortunato,et al.  Design of a ducted wind turbine for offshore floating platforms , 2016 .

[10]  Xin Shen,et al.  Aerodynamic shape optimization of non-straight small wind turbine blades , 2016 .

[11]  A. Vacca,et al.  Preconditioned spectral multi-domain discretization of the incompressible Navier-Stokes equations , 2004 .

[12]  Jens Nørkær Sørensen,et al.  Analysis of Power Enhancement for a Row of Wind Turbines Using the Actuator Line Technique , 2007 .

[13]  Ronald F. Boisvert,et al.  NIST Handbook of Mathematical Functions , 2010 .

[14]  J. Sørensen.  General Momentum Theory for Horizontal Axis Wind Turbines , 2015 .

[15]  Daniel Micallef,et al.  Analysis of Mexico wind tunnel measurements: Final report of IEA Task 29, Mexnext (Phase 1) , 2012 .

[16]  R. Bontempo,et al.  Analysis and Evaluation of the Momentum Theory Errors as Applied to Propellers , 2016 .

[17]  John T. Conway,et al.  Exact actuator disk solutions for non-uniform heavy loading and slipstream contraction , 1998, Journal of Fluid Mechanics.

[18]  R. Bontempo,et al.  Actuator disc methods for open propellers: assessments of numerical methods , 2017 .

[19]  R. Bontempo,et al.  Highly accurate error estimate of the momentum theory as applied to wind turbines , 2017 .

[20]  N. Troldborg.  Actuator Line Modeling of Wind Turbine Wakes , 2009 .

[21]  Jens Nørkær Sørensen,et al.  Numerical Modeling of Wind Turbine Wakes , 2002 .

[22]  Robert Flemming Mikkelsen,et al.  On the validity of the blade element momentum theory , 2001 .

[23]  Jens Nørkær Sørensen,et al.  Tip Loss Correction for Actuator/Navier–Stokes Computations , 2005 .

[24]  P. Goorjian.  An Invalid Equation in the General Momentum Theory of Actuator Disk , 1972 .

[25]  M. Manna,et al.  Effects of the duct thrust on the performance of ducted wind turbines , 2016 .

[26]  D. Kocurek,et al.  Lifting surface performance analysis for horizontal axis wind turbines , 1987 .

[27]  Michele Messina,et al.  Flow similitude laws applied to wind turbines through blade element momentum theory numerical codes , 2014 .

[28]  Shun Kang,et al.  The modeling and numerical simulations of wind turbine generation system with free vortex method and simulink , 2015 .

[29]  Jens Nørkær Sørensen,et al.  Actuator Line Simulation of Wake of Wind Turbine Operating in Turbulent Inflow , 2007 .

[30]  F. Grasso,et al.  Development and Validation of Generalized Lifting Line Based Code for Wind Turbine Aerodynamics , 2011 .

[31]  Hamdy A. Kandil,et al.  Aerodynamic analysis of different wind-turbine-blade profiles using finite-volume method , 2012 .

[32]  Massimo Cardone,et al.  Performance analysis of ducted marine propellers. Part I – Decelerating duct , 2016 .

[33]  Daniel Zwillinger,et al.  CRC standard mathematical tables and formulae; 30th edition , 1995 .

[34]  Göran Ronsten,et al.  Static pressure measurements on a rotating and a non-rotating 2.375 m wind turbine blade. Comparison with 2D calculations , 1992 .

[35]  R. Bontempo,et al.  A nonlinear and semi-analytical actuator disk method accounting for general hub shapes. Part 1. Open rotor , 2016, Journal of Fluid Mechanics.

[36]  Massimo Cardone,et al.  A comparison of nonlinear actuator disk methods for the performance analysis of ducted marine propellers , 2015 .

[37]  John Horlock.  Actuator disk theory , 1978 .

[38]  Scaling properties of turbulent pipe flow at low Reynolds number , 2001 .

[39]  I. S. Gradshteyn,et al.  Table of Integrals, Series, and Products , 1976 .

[40]  Richard G. J. Flay,et al.  Effect of placing a diffuser around a wind turbine , 2000 .

[41]  Jean-Jacques Chattot.  Optimization of Wind Turbines Using Helicoidal Vortex Model , 2003 .

[42]  Massimo Cardone,et al.  Ducted propeller flow analysis by means of a generalized actuator disk model , 2014 .

[43]  João Tavares Pinho,et al.  An extension of the Blade Element Momentum method applied to Diffuser Augmented Wind Turbines , 2014 .

[44]  R. Mikkelsen.  Actuator Disc Methods Applied to Wind Turbines , 2004 .

[45]  Sven Schmitz,et al.  Guidelines for Volume Force Distributions Within Actuator Line Modeling of Wind Turbines on Large-Eddy Simulation-Type Grids , 2014 .

[46]  Wen Zhong Shen,et al.  The Actuator Surface Model: A New Navier-Stokes Based Model for Rotor Computations , 2009 .

[47]  R. Bontempo,et al.  Performance analysis of open and ducted wind turbines , 2014 .

[48]  Jens Nørkær Sørensen,et al.  Actuator surface model for wind turbine flow computations , 2007 .

[49]  Man-Hoe Kim,et al.  Airborne wind turbine shell behavior prediction under various wind conditions using strongly coupled fluid structure interaction formulation , 2016 .

[50]  Xin Cai,et al.  Unsteady aerodynamics simulation of a full-scale horizontal axis wind turbine using CFD methodology , 2016 .

[51]  M.R.H. Nobari,et al.  Improvement of wind turbine performance using a novel tip plate structure , 2016 .

[52]  Paul van der Laan,et al.  Verification and validation of an actuator disc model , 2014 .

[53]  R. Bontempo,et al.  Effects of Duct Cross Section Camber and Thickness on the Performance of Ducted Propulsion Systems for Aeronautical Applications , 2016 .