Comparison of Neutral-Point-Clamped, Symmetrical, and Hybrid Asymmetrical Multilevel Inverters

This paper presents a comparison of three topologies of multilevel inverters applied to drive an induction motor of 500 kVA/4.16 kV rating. The multilevel inverters analyzed are the following: a neutral-point-clamped inverter, a symmetrical cascaded multilevel inverter, and a hybrid asymmetrical cascaded multilevel inverter. The performance indexes used in the comparison are total harmonic distortion, first-order distortion factor, second-order distortion factor, common-mode voltage, semiconductor power loss distribution, and heat-sink volume. The multilevel inverters are designed to present 99% efficiency at the nominal operating point, and the aforementioned performance indexes are compared for distinct values of amplitude modulation depth.

[1]  Alex Q. Huang,et al.  Small-Signal Model-Based Control Strategy for Balancing Individual DC Capacitor Voltages in Cascade Multilevel Inverter-Based STATCOM , 2009, IEEE Transactions on Industrial Electronics.

[2]  Wang Liqiao,et al.  Study on shunt active power filter based on cascade multilevel converters , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[3]  Cassiano Rech,et al.  Line current harmonics reduction in multipulse connection of asymmetrically loaded rectifiers , 2005, IEEE Transactions on Industrial Electronics.

[4]  D. Soto,et al.  Nonlinear control strategies for cascaded multilevel STATCOMs , 2004, IEEE Transactions on Power Delivery.

[5]  A.K. Gupta,et al.  A general space vector PWM algorithm for multilevel inverters, including operation in overmodulation range , 2007, IEEE International Conference on Electric Machines and Drives, 2005..

[6]  Dong-Seok Hyun,et al.  The analysis of conduction and switching losses in multi-level inverter system , 2001, 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230).

[7]  Shaahin Filizadeh,et al.  An Optimized Space Vector Modulation Sequence for Improved Harmonic Performance , 2009, IEEE Transactions on Industrial Electronics.

[8]  K. Gopakumar,et al.  A Pulsewidth Modulated Control of Induction Motor Drive Using Multilevel 12-Sided Polygonal Voltage Space Vectors , 2009, IEEE Transactions on Industrial Electronics.

[9]  Samir Kouro,et al.  Unidimensional Modulation Technique for Cascaded Multilevel Converters , 2009, IEEE Transactions on Industrial Electronics.

[10]  Vassilios G. Agelidis,et al.  Analysis of multicarrier PWM methods for a single-phase five level inverter , 2001, 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230).

[11]  C. Rech,et al.  Impact of Hybrid Multilevel Modulation Strategies on Input and Output Harmonic Performances , 2007, IEEE Transactions on Power Electronics.

[12]  Mariusz Malinowski,et al.  Comparison of 2.3-kV Medium-Voltage Multilevel Converters for Industrial Medium-Voltage Drives , 2007, IEEE Transactions on Industrial Electronics.

[13]  Alfred Rufer,et al.  Control of a hybrid asymmetric multilevel inverter for competitive medium-voltage industrial drives , 2003, IEEE Transactions on Industry Applications.

[14]  D.A.B. Zambra,et al.  A comparative analysis between the symmetric and the hybrid asymmetric nine-level series connected H-bridge cells inverter , 2007, 2007 European Conference on Power Electronics and Applications.

[15]  D.A.B. Zambra,et al.  Power losses analysis and cooling system design of three topologies of multilevel inverters , 2008, 2008 IEEE Power Electronics Specialists Conference.

[16]  A. Rufer,et al.  Control of a hybrid asymmetric multilevel inverter for competitive medium-voltage industrial drives , 2003, IEEE Transactions on Industry Applications.

[17]  M.R. Baiju,et al.  A Simple Space Vector PWM Generation Scheme for Any General $n$-Level Inverter , 2009, IEEE Transactions on Industrial Electronics.

[18]  Steffen Bernet,et al.  How to Select the System Voltage of MV Drives—A Comparison of Semiconductor Expenses , 2008, IEEE Transactions on Industrial Electronics.

[19]  T. Lipo,et al.  Hybrid multilevel power conversion system: a competitive solution for high power applications , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[20]  Barry W. Williams,et al.  Multilevel converters and series connection of igbt evaluation for high-power, high-voltage applications , 2004 .

[21]  Vassilios G. Agelidis,et al.  Application specific harmonic performance evaluation of multicarrier PWM techniques , 1998, PESC 98 Record. 29th Annual IEEE Power Electronics Specialists Conference (Cat. No.98CH36196).

[22]  Bin Wu,et al.  Multilevel Voltage-Source-Converter Topologies for Industrial Medium-Voltage Drives , 2007, IEEE Transactions on Industrial Electronics.

[23]  K. Gopakumar,et al.  A Combination of Hexagonal and 12-Sided Polygonal Voltage Space Vector PWM Control for IM Drives Using Cascaded Two-Level Inverters , 2009, IEEE Transactions on Industrial Electronics.

[24]  S. Bernet,et al.  Design and comparison of 4.16 kV neutral point clamped, flying capacitor and series connected H-bridge multi-level converters , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..