Etching of SiO2 features in fluorocarbon plasmas: Explanation and prediction of gas-phase-composition effects on aspect ratio dependent phenomena in trenches

A model to calculate etching rates in SiO2 features in fluorocarbon plasmas is presented. The model can predict several aspect ratio dependent phenomena such as reactive ion etching (RIE) lag, etch stop, inverse RIE lag, and aspect ratio independent etching (ARIE) at least for a limited range of aspect ratio values. The model includes three components: (a) a surface model for open area etching of SiO2 (and Si) [Gogolides et al., J. Appl. Phys. 88, 5570 (2000)]; (b) a flux calculator, which calculates local fluxes on each elementary surface of the feature being etched; and (c) a coupling of the two models (a) and (b), the focal point of coupling being the simultaneous calculation of the neutral species fluxes and the corresponding effective sticking coefficients. The model is applied for trench etching and the gas phase conditions considered correspond to a generic fluorocarbon gas. A different approach is presented by which the gas phase composition is divided (i.e., mapped) into regions leading to (a) de...

[1]  D. C. Gray,et al.  Influence of reactant transport on fluorine reactive ion etching of deep trenches in silicon , 1993 .

[2]  M. Surendra,et al.  Fluorocarbon high density plasma. VI. Reactive ion etching lag model for contact hole silicon dioxide etching in an electron cyclotron resonance plasma , 1994 .

[3]  Ying Zhang,et al.  Fluorocarbon high density plasma. V. Influence of aspect ratio on the etch rate of silicon dioxide in an electron cyclotron resonance plasma , 1994 .

[4]  R. Gottscho,et al.  Aspect ratio independent etching : fact or fantasy ? , 1995 .

[5]  C. W. Jurgensen,et al.  Microscopic uniformity in plasma etching , 1992 .

[6]  K. Whang,et al.  Effects of bias frequency on reactive ion etching lag in an electron cyclotron resonance plasma etching system , 1997 .

[7]  J. Pelletier,et al.  Two-dimensional implications of a purely reactive model for plasma etching , 1991 .

[8]  Marcus F. Doemling,et al.  Observation of inverse reactive ion etching lag for silicon dioxide etching in inductively coupled plasmas , 1996 .

[9]  J. Jorné,et al.  Redeposition during Deep Trench Etching , 1990 .

[10]  James P. McVittie,et al.  Crystal-orientation dependent etch rates and a trench model for dry etching , 1988 .

[11]  J. Arnold,et al.  Substrate bias effects in high‐aspect‐ratio SiO2 contact etching using an inductively coupled plasma reactor , 1995 .

[12]  J. Gregus,et al.  Scaling of Si and GaAs trench etch rates with aspect ratio, feature width, and substrate temperature , 1995 .

[13]  I. Amdur,et al.  Kinetic Theory of Gases , 1959 .

[14]  Vivek K. Singh,et al.  Simulation of profile evolution in silicon reactive ion etching with re‐emission and surface diffusion , 1992 .

[15]  K. Giapis,et al.  Aspect ratio independent etching of dielectrics , 1997 .

[16]  A. Misaka,et al.  Simulation study of micro-loading phenomena in silicon dioxide hole etching , 1997 .

[17]  K. Giapis,et al.  Aspect-ratio-dependent charging in high-density plasmas , 1997 .

[18]  G. Turban,et al.  Surface and plasma simulation of deposition processes: CH4 plasmas for the growth of diamondlike carbon , 1996 .

[19]  James Jeans,et al.  An Introduction to the Kinetic Theory of Gases: Index of Subjects , 2009 .

[20]  Michio Tajima,et al.  Determination of Conversion Factor for Infrared Measurement of Oxygen in Silicon , 1985 .

[21]  V. F. Lukichev.  A new approach to aspect ratio independent etching , 1998 .

[22]  G. Turban,et al.  Etching of SiO2 and Si in fluorocarbon plasmas: A detailed surface model accounting for etching and deposition , 2000 .

[23]  K. Atkinson,et al.  A survey of numerical methods for the solution of Fredholm integral equations of the second kind , 1977 .

[24]  J. Arnold,et al.  Charging of pattern features during plasma etching , 1991 .

[25]  K. Valiev,et al.  Aperture effect in plasma etching of deep silicon trenches , 1991 .

[26]  Ian Ronald Johnston,et al.  Recent advances in silicon etching for MEMS using the ASE™ process , 1999 .

[27]  Ying Zhang,et al.  Fluorocarbon high‐density plasmas. I. Fluorocarbon film deposition and etching using CF4 and CHF3 , 1994 .

[28]  H. F. Winters,et al.  Conductance considerations in the reactive ion etching of high aspect ratio features , 1989 .