Topology optimization of frame structures with flexible joints

A method for structural topology optimization of frame structures with flexible joints is presented. A typical frame structure is a set of beams and joints assembled to carry an applied load. The problem considered in this paper is to find the stiffest frame for a given mass. By introducing design variables for beams and joints, a mass distribution for optimal structural stiffness can be found. Each beam can have several design variables connected to its cross section. One of these is an area-type design variable which is used to represent the global size of the beam. The other design variables are of length ratio type, controlling the cross section of the beam. Joints are flexible elements connecting the beams in the structure. Each joint has stiffness properties and a mass. A framework for modelling these stiffnesses is presented and design variables for joints are introduced. We prove a theorem which can be interpreted as the fact that the removal of structural elements, e.g. joints or beams, can be modelled by a small strictly positive material amount assigned to the element. This is needed for the computations of sensitivities used in the applied gradient based iterative method. Both two and three dimensional problems, as well as multiple load cases and multiple mass constraints, are treated.

[1]  Ali M. Memari,et al.  Optimal design of steel frames subject to gravity and seismic codes' prescribed lateral forces , 1999 .

[2]  Zenon Mróz,et al.  Optimal joint positions and stiffness distribution for minimum mass frames with damping constraints , 1998 .

[3]  Noboru Kikuchi,et al.  First Order Analysis - New CAE Tools for Automotive Body Designers , 2001 .

[4]  K. Svanberg.  The method of moving asymptotes—a new method for structural optimization , 1987 .

[5]  Martin P. Bendsøe,et al.  Optimization of Structural Topology, Shape, And Material , 1995 .

[6]  Wolfgang Achtziger,et al.  Local stability of trusses in the context of topology optimization Part I: Exact modelling , 1999 .

[7]  T. M. Cameron,et al.  Optimization of frame structures with flexible joints , 2000 .

[8]  O. Sergeyev,et al.  On design of joint positions for minimum mass 3D frames , 1996 .

[9]  G. Cheng,et al.  ε-relaxed approach in structural topology optimization , 1997 .

[10]  M. Bendsøe,et al.  Optimization methods for truss geometry and topology design , 1994 .

[11]  Mokhtar S. Bazaraa,et al.  Nonlinear Programming: Theory and Algorithms , 1993 .

[12]  Harald Fredricson.  Optimization methods for vehicle body structures , 2002 .

[13]  G. Jivotovski.  A gradient based heuristic algorithm and its application to discrete optimization of bar structures , 2000 .

[14]  Niels Olhoff,et al.  Topology optimization of continuum structures: A review* , 2001 .

[15]  D. W. Scharpf,et al.  Finite element method — the natural approach , 1979 .

[16]  James W. Daniel,et al.  Stability of the solution of definite quadratic programs , 1973, Math. Program..

[17]  W. Achtziger.  Multiple-Load Truss Topology and Sizing Optimization: Some Properties of Minimax Compliance , 1998 .