Thermally integrated fuel processor design for fuel cell applications

Abstract Effective thermal integration could enable the use of compact fuel processors with PEM fuel cell-based power systems. These systems have potential for deployment in distributed, stationary electricity generation using natural gas. This paper describes a concept wherein the latent heat of vaporization of H2O is used to control the axial temperature gradient of a fuel processor consisting of an autothermal reformer (ATR) with water gas shift (WGS) and preferential oxidation (PROX) reactors to manage the CO exhaust concentration. A prototype was experimentally evaluated using methane fuel over a range of external heat addition and thermal inputs. The experiments confirmed that the axial temperature profile of the fuel processor can be controlled by managing only the vapor fraction of the premixed reactant stream. The optimal temperature profile is shown to result in high thermal efficiency and a CO concentration less than 40 ppm at the exit of the PROX reactor.

[1]  Dylan Mason,et al.  A light hydrocarbon fuel processor producing high-purity hydrogen , 2003 .

[2]  A. Perna,et al.  Investigations on the behaviour of 2 kW natural gas fuel processor , 2011 .

[3]  Hyun Chul Lee,et al.  A compact and highly efficient natural gas fuel processor for 1-kW residential polymer electrolyte membrane fuel cells , 2007 .

[4]  Caine M. Finnerty,et al.  REFORMING CATALYSTS FOR HYDROGEN GENERATION IN FUEL CELL APPLICATIONS , 2006 .

[5]  Erdogan Gulari,et al.  Selective CO oxidation over Pt/alumina catalysts for fuel cell applications , 2002 .

[6]  Thomas Aicher,et al.  A portable fuel processor for hydrogen production from ethanol in a 250 Wel fuel cell system , 2009 .

[7]  M. Krumpelt,et al.  Hydrogen from hydrocarbon fuels for fuel cells , 2001 .

[8]  J. Armor,et al.  The multiple roles for catalysis in the production of H2 , 1999 .

[9]  M. Funke,et al.  A dynamic model of the fuel processor for a residential PEM fuel cell energy system , 2009 .

[10]  R. Besser.  Thermal integration of a cylindrically symmetric methanol fuel processor for portable fuel cell power , 2011 .

[11]  J. Boon,et al.  Development of a single stage heat integrated water–gas shift reactor for fuel processing , 2010 .

[12]  M. Schuessler,et al.  Monolithic integrated fuel processor for the conversion of liquid methanol , 2003 .

[13]  Antonio Vita,et al.  Experimental analysis of a 2 kWe LPG-based fuel processor for polymer electrolyte fuel cells , 2006 .

[14]  Shudong Wang,et al.  Integrated fuel processor built on autothermal reforming of gasoline: A proof-of-principle study , 2006 .

[15]  Brant A. Peppley,et al.  Integrated fuel processors for fuel cell application : A review , 2007 .

[16]  J. Wagner,et al.  Water Gas Shift Catalysis , 2009 .

[17]  Cheng-Ching Yu,et al.  Modelling an experimental methane fuel processor , 2005 .

[18]  Rajesh K. Ahluwalia,et al.  Fuel processors for automotive fuel cell systems: a parametric analysis , 2001 .

[19]  Daniel V. Applegate,et al.  Hydrogen from natural gas: part I—autothermal reforming in an integrated fuel processor , 2005 .

[20]  T. Baier,et al.  A micro-structured 5 kW complete fuel processor for iso-octane as hydrogen supply system for mobile auxiliary power units: Part I. Development of autothermal reforming catalyst and reactor , 2008 .

[21]  Andrew Dicks,et al.  Hydrogen generation from natural gas for the fuel cell systems of tomorrow , 1996 .

[22]  Stefan Pischinger,et al.  Compact gasoline fuel processor for passenger vehicle APU , 2005 .

[23]  Rajesh K. Ahluwalia,et al.  A natural-gas fuel processor for a residential fuel cell system. , 2009 .

[24]  M. Castaldi,et al.  An investigation into water and thermal balance for a liquid fueled fuel processor , 2007 .

[25]  Steven G. Goebel,et al.  Fast starting fuel processor for automotive fuel cell systems , 2005 .

[26]  Jamie D. Holladay,et al.  Fuel Processing for Portable Power Applications , 2003 .

[27]  James Larminie,et al.  Fuel Cell Systems Explained , 2000 .

[28]  Spyros Voutetakis,et al.  A combined methanol autothermal steam reforming and PEM fuel cell pilot plant unit: Experimental and simulation studies , 2009 .

[29]  Yutaek Seo,et al.  Development of compact fuel processor for 2 kW class residential PEMFCs , 2006 .

[30]  Bruce A. Finlayson,et al.  Heat transfer in packed beds—a reevaluation , 1977 .

[31]  Michael Q. Wang,et al.  Fuel-cycle analysis of early market applications of fuel cells: Forklift propulsion systems and distributed power generation , 2009 .