70 nm low-noise metamorphic HEMT technology on 4 inch GaAs wafers

A 70 nm gate length metamorphic HEMT technology will be presented. Extrinsic cut-off frequencies of f/sub t/ = 293 GHz and f/sub max/ = 337 GHz were achieved. The transistors have an on-state breakdown voltage of 1.7 V. A median time to failure of 1/spl times/10/sup 6/ h at 125/spl deg/C and an activation energy of 1.3 eV was extrapolated based on a 10% g/sub m,max/ degradation in air. This is significant less than the 1.8 eV activation energy of our 100 nm gate-length 65% In process which is probably due to hot electron effects. The MMIC-process obtains high yields on transistor and circuit level. Low-noise amplifiers demonstrate a small signal gain of 13 dB and a noise figure of 2.8 dB at 94 GHz. The achieved results are comparable to state-of-the-art InP-based HEMT technologies.

[1]  W. Klein,et al.  Metamorphic InAlAs/InGaAs HEMTs on GaAs substrates with a novel composite channels design , 1996, IEEE Electron Device Letters.

[2]  A. Leuther,et al.  Effect of gate metal on reliability of metamorphic HEMTs , 2001, 2001 GaAs Reliability Workshop. Proceedings (IEEE Cat. No.01TH8602).

[3]  R. Lai,et al.  InP HEMT and HBT applications beyond 200 GHz , 2002, Conference Proceedings. 14th Indium Phosphide and Related Materials Conference (Cat. No.02CH37307).

[4]  M. Nishimoto,et al.  High reliability of 0.07 /spl mu/m pseudomorphic InGaAs/InAlAs/InP HEMT MMICs on 3-inch InP substrates , 2002, Conference Proceedings. 14th Indium Phosphide and Related Materials Conference (Cat. No.02CH37307).

[5]  W. Kong,et al.  Very high gain millimeter-wave InAlAs/InGaAs/GaAs metamorphic HEMT's , 1999, IEEE Electron Device Letters.

[6]  A. Leuther,et al.  Reliability and degradation mechanism of AlGaAs/InGaAs and InAlAs/InGaAs HEMTs , 2003 .