A review on solutions for improving rutting resistance of asphalt pavement and test methods

Abstract Permanent deformation, mainly referring to rutting, is one of the main distress modes of asphalt pavement. Exploring effective methods to mitigate the rutting distress is of great significance for providing a long-life and safe road. The rutting solutions were first reviewed. It was found that the efforts from academic and engineering industries focused on enhancing the rheological properties of asphalt binder by adding modifying powder, fiber or mixture into binder or mixture, as well as strengthening aggregate interlock and applying novel pavement structure. Semi-flexible asphalt pavement was suggested to be a promising method to fight the rutting distress, because it has a high mechanical property without scarifying the flexibility of asphalt pavement. In order to consider the influence of temperature on rutting occurrence, cool asphalt pavements, especially heat-transfer induced structures, were reviewed and deemed to be a new strategy for reducing rutting susceptibility of asphalt pavement. In order to evaluate the effectiveness of above rutting solutions, many tests, such as multi-stress creep recovery test for asphalt binder and wheel tracking test for asphalt mixture, were reviewed. By linking the reported results of wheel tracking test with high-temperature rutting mechanism it was advised to develop a test method that could reproduce the real field pavement environment, including multiple stress mode, temperature gradient control system and pavement structure, to assess the rutting response of asphalt mixture. This review is expected to provide an overall insight on the existing rutting solutions and test methods, and recommend future studying areas relevant to rutting distress.

[1]  Niki Gaitani,et al.  Experimental testing of cool colored thin layer asphalt and estimation of its potential to improve the urban microclimate , 2011 .

[2]  R. Zerbino,et al.  Wheel tracking rutting performance estimation based on bitumen Low Shear Viscosity (LSV), loading and temperature conditions , 2014 .

[3]  John D'Angelo,et al.  The Relationship of the MSCR Test to Rutting , 2009 .

[4]  A. Aksoy,et al.  Investigation of rutting performance of asphalt mixtures containing polymer modifiers , 2007 .

[5]  R. Mallick,et al.  Assessing the feasibility of incorporating phase change material in hot mix asphalt , 2015 .

[6]  Mofreh Saleh,et al.  Laboratory evaluation of warm mix asphalt incorporating high RAP proportion by using evotherm and sylvaroad additives , 2016 .

[7]  Lu Wang,et al.  Effect of chemical composition of aggregate on interfacial adhesion property between aggregate and asphalt , 2017 .

[8]  Ramon Bonaquist,et al.  Analysis of Pavement Rutting Data from FHWA Pavement Testing Facility Superpave Validation Study , 1997 .

[9]  Rui Li,et al.  Formulation and performance comparison of grouting materials for semi-flexible pavement , 2016 .

[10]  Daniel Castro-Fresno,et al.  Asphalt solar collectors: A literature review , 2013 .

[11]  H. B. Sant'ana,et al.  Effects of nanoclay and nanocomposites on bitumen rheological properties , 2016 .

[12]  Pouria Hajikarimi,et al.  Comparing different rutting specification parameters using high temperature characteristics of rubber-modified asphalt binders , 2015 .

[13]  Yifan Sun,et al.  Performance of hot mix epoxy asphalt binder and its concrete , 2015 .

[14]  Y. Kim,et al.  Fatigue and Rutting Evaluation of Laboratory-Produced Asphalt Mixtures Containing Reclaimed Asphalt Pavement , 2015 .

[15]  Shaopeng Wu,et al.  Multi-stress loading effect on rutting performance of asphalt mixtures based on wheel tracking testing , 2017 .

[16]  Rafiqul A. Tarefder,et al.  Weibull Model for Rutting Prediction of Warm-Mix Asphalt Agents: Using Hamburg Wheel-Tracking Device Results , 2016 .

[17]  Xiaoping Ji,et al.  Application of asphalt mixture shear strength to evaluate pavement rutting with accelerated loading facility (ALF) , 2013 .

[18]  Aditya Kumar Das,et al.  Investigation of rutting, fracture and thermal cracking behavior of asphalt mastic containing basalt and hydrated lime fillers , 2017 .

[19]  Halit Ozen,et al.  Rutting evaluation of hydrated lime and SBS modified asphalt mixtures for laboratory and field compacted samples , 2011 .

[20]  Du Yinfei,et al.  Bidirectional heat induced structure of asphalt pavement for reducing pavement temperature , 2015 .

[21]  Xiaoming Huang,et al.  Investigation of rutting behavior of asphalt pavement in long and steep section of mountainous highway with overloading , 2015 .

[22]  J. Boone,et al.  Investigation of asphalt concrete rutting mechanisms by X-ray computed tomography imaging and micromechanical finite element modeling , 2013 .

[23]  T. Ma,et al.  Experimental study of recycled asphalt concrete modified by high-modulus agent , 2016 .

[24]  R. Christopher Williams,et al.  Preliminary Dynamic Modulus Criteria of HMA for Field Rutting of Asphalt Pavements , 2010 .

[25]  Xiaoming Huang,et al.  Integrated Experimental and Numerical Study on Permanent Deformation of Asphalt Pavement at Intersections , 2013 .

[26]  G. Zou,et al.  Evaluation of Rheological Properties and Field Applications of Buton Rock Asphalt , 2015 .

[27]  Yinfei Du,et al.  Oriented heat release in asphalt pavement induced by high-thermal-conductivity rods , 2015 .

[28]  Mofreh Saleh,et al.  Evaluation of warm mix asphalt performance incorporating high RAP content , 2016 .

[29]  H. A. Nageim,et al.  High performance cold asphalt concrete mixture for binder course using alkali-activated binary blended cementitious filler , 2017 .

[30]  Praveen Kumar,et al.  Effect of aggregate types on the performance of neat and EVA-modified asphalt mixtures , 2014 .

[31]  Andrew Hanz,et al.  Use of performance-based testing for high RAP mix design and production monitoring , 2017 .

[32]  Bradley J. Putman,et al.  Evaluation of Rutting Resistance in Warm-Mix Asphalts Containing Moist Aggregate , 2010 .

[33]  Junan Shen,et al.  Performance properties of rubberized stone matrix asphalt mixtures produced through different processes , 2016 .

[34]  Richard Izzo,et al.  Use of the Hamburg Wheel-Tracking Device for Evaluating Moisture Susceptibility of Hot-Mix Asphalt , 1999 .

[35]  H. R. Jahanian,et al.  Performance evaluation of Hot Mix Asphalt (HMA) containing bitumen modified with Gilsonite , 2017 .

[36]  M. Arabani,et al.  Laboratory investigation of rutting and fatigue in glassphalt containing waste plastic bottles , 2016 .

[38]  Juan Gallego,et al.  Mechanical performance of asphalt rubber mixtures with warm mix asphalt additives , 2017 .

[39]  Lihong He,et al.  Analysis on the cooling effect of a heat-reflective coating for asphalt pavement , 2015 .

[40]  Mansour Fakhri,et al.  Laboratory evaluation of rutting and moisture damage resistance of glass fiber modified warm mix asphalt incorporating high RAP proportion , 2017 .

[41]  Ali Topal,et al.  Evaluation of Rutting Performance of Warm Mix Asphalt , 2017 .

[42]  Ali Mansourkhaki,et al.  The effect of aggregate gradation on creep and moisture susceptibility performance of warm mix asphalt , 2014 .

[43]  Qiao Dong,et al.  Development of an Innovative Uniaxial Compression Test to Evaluate Permanent Deformation of Asphalt Mixtures , 2015 .

[44]  R. Zerbino,et al.  The use of asphalt low shear viscosity to predict permanent deformation performance of asphalt concrete , 2011 .

[45]  Reynaldo Roque,et al.  Effects of Surface Rutting on Near-Surface Pavement Responses Based on a Two-Dimensional Axle-Tire-Pavement Interaction Finite-Element Model , 2012 .

[46]  Jian-Shiuh Chen,et al.  Engineering properties and performance of asphalt mixtures incorporating steel slag , 2016 .

[47]  Dallas N. Little,et al.  Static Creep and Repeated Load as Rutting Performance Tests for Airport HMA Mix Design , 2014 .

[48]  Mohd Rosli Hainin,et al.  Engineering properties of asphalt binders containing nanoclay and chemical warm-mix asphalt additives , 2016 .

[49]  Hee Mun Park,et al.  Effects of Aggregate Structure on Hot-Mix Asphalt Rutting Performance in Low Traffic Volume Local Pavements , 2009 .

[50]  R. Kluttz,et al.  Revision of the Superpave High Temperature Binder Specification: The Multiple Stress Creep Recovery Test (With Discussion) , 2007 .

[51]  Ş. Oruç,et al.  Improvement in performance properties of asphalt using a novel boron-containing additive , 2016 .

[52]  Xin Yu,et al.  RAP Binder Influences on the Rheological Characteristics of Foamed Warm-Mix Recycled Asphalt , 2017 .

[53]  H. Ziari,et al.  Laboratory evaluation of the effect of waste plastic bottle (PET) on rutting performance of hot mix asphalt mixtures , 2016 .

[54]  Luis Alberto Herrmann do Nascimento,et al.  Effects of morphological characteristics of aggregate particles on the mechanical behavior of bituminous paving mixtures , 2016 .

[55]  Huaxin Chen,et al.  Effects of phosphorus slag powder and polyester fiber on performance characteristics of asphalt binders and resultant mixtures , 2017 .

[56]  James Grenfell,et al.  Rutting of bituminous mixtures: wheel tracking tests campaign analysis , 2011 .

[57]  S. Tighe,et al.  Effects of high friction aggregate and PG Plus binder on rutting resistance of hot mix asphalt mixtures , 2017 .

[58]  Erdem Coleri,et al.  Evaluation of AASHTO T 324 Hamburg-Wheel Track Device test , 2016 .

[59]  Ellie H. Fini,et al.  Rutting Characteristics of Styrene-Ethylene/Propylene-Styrene Polymer Modified Asphalt , 2015 .

[60]  Imad L. Al-Qadi,et al.  Evaluation of Surface-Related Pavement Damage due to Tire Braking , 2010 .

[61]  Sigurdur Erlingsson,et al.  Modelling of responses and rutting profile of a flexible pavement structure in a heavy vehicle simulator test , 2015 .

[62]  Wenbin Zhao,et al.  Characterization of rutting performance of warm additive modified asphalt mixtures , 2012 .

[63]  M. D. I. Domingos,et al.  Susceptibility of Asphalt Binders to Rutting: Literature Review , 2016 .

[64]  Thamindra Lakshan Jayanthi Wasage,et al.  Rheological analysis of multi-stress creep recovery (MSCR) test , 2011 .

[65]  John D'Angelo,et al.  Proposed Refinement of Superpave High-Temperature Specification Parameter for Performance-Graded Binders , 2001 .

[66]  Hervé Di Benedetto,et al.  Thermomechanical characterization of asphalt mixtures modified with high contents of asphalt shingle modifier (ASM®) and reclaimed asphalt pavement (RAP) , 2013 .

[67]  Alex K. Apeagyei,et al.  Experimental study on materials composition design and mixture performance of water-retentive asphalt concrete , 2016 .

[68]  Jo Sias Daniel,et al.  Effects of Long-Term Oven Aging on Reclaimed Asphalt Pavement Mixtures , 2012 .

[69]  Y. Richard Kim,et al.  Rutting performance evaluation of asphalt mix with different types of geosynthetics using MMLS3 , 2015 .

[70]  Lubinda F. Walubita,et al.  The Hamburg rutting test – Effects of HMA sample sitting time and test temperature variation , 2016 .

[71]  Wang Ning,et al.  Performance evaluation of asphalt mixture using brake pad waste as mineral filler , 2017 .

[72]  R J Cominsky,et al.  SUPERIOR PERFORMING ASPHALT PAVEMENTS (SUPERPAVE): THE PRODUCT OF THE SHRP ASPHALT RESEARCH PROGRAM , 1994 .

[73]  Y. Richard Kim,et al.  Development of Stress Sweep Rutting (SSR) test for permanent deformation characterization of asphalt mixture , 2017 .

[74]  Hui Wang,et al.  Laboratory investigation and numerical simulation of the rutting performance of double-layer surfacing structure for steel bridge decks , 2017 .

[75]  Rebecca S McDaniel,et al.  High-Temperature Properties of Asphalt Binders: Comparison of Multiple Stress Creep Recovery and Performance Grading Systems , 2016 .

[76]  R. Kluttz,et al.  Linear viscoelastic limits of bituminous binders , 2002 .

[77]  Dar-Hao Chen,et al.  Calibrating Mechanistic-Empirical Design Guide Permanent Deformation Models Based on Accelerated Pavement Testing , 2009 .

[78]  Lubinda F. Walubita,et al.  Measurement of HMA Shear Resistance Potential in the Lab: The Simple Punching Shear Test , 2015 .

[79]  Lubinda F. Walubita,et al.  Exploring the flow number (FN) index as a means to characterise the HMA permanent deformation response under FN testing , 2013 .

[80]  Sungun Kim,et al.  Performance of Modified WMA Mixtures Prepared Using the Same Class PG Binders of HMA Mixtures , 2014 .

[81]  Long Jin,et al.  Design and performance validation of high-performance cement paste as a grouting material for semi-flexible pavement , 2016 .

[82]  Xingzhong Weng,et al.  The influence on the durability of semi-flexible airport pavement materials to cyclic wheel load test , 2015 .

[83]  Reza Imaninasab.  Rutting resistance and resilient modulus evaluation of polymer-modified SMA mixtures , 2016 .

[84]  D. Feng,et al.  Performance and Thermal Evaluation of Incorporating Waste Ceramic Aggregates in Wearing Layer of Asphalt Pavement , 2013 .

[85]  Jiu-peng Zhang,et al.  Comprehensive service properties evaluation of composite grouting materials with high-performance cement paste for semi-flexible pavement , 2017 .

[86]  A. Scarpas,et al.  Using Pavement as Solar Collector: Effect on Pavement Temperature and Structural Response , 2001 .

[87]  Mahmoud Ameri,et al.  Laboratory Evaluation of Damage Behavior of Warm Mix Asphalt Containing Steel Slag Aggregates , 2017 .

[88]  A. T. Pauli,et al.  Ageing characteristics of RAP binder blends – what types of RAP binders are suitable for multiple recycling? , 2014 .

[89]  Haocheng Xiong,et al.  Evaluation of pavement response and performance under different scales of APT facilities , 2017 .

[90]  Xiaoping Ji,et al.  Development of a rutting prediction model for asphalt pavements with the use of an accelerated loading facility , 2016 .

[91]  Fujian Ni,et al.  Cause analysis on permanent deformation for asphalt pavements using field cores , 2015 .

[92]  Jay G. Sanjayan,et al.  Development of thermal energy storage composites and prevention of PCM leakage , 2014 .

[93]  Du Yinfei,et al.  Highly oriented heat-induced structure of asphalt pavement for reducing pavement temperature , 2014 .

[94]  Shuaicheng Guo,et al.  Laboratory performance evaluation of both flake graphite and exfoliated graphite nanoplatelet modified asphalt composites , 2017 .

[95]  H. A. Nageim,et al.  Laboratory Studies to Examine the Properties of a Novel Cold-Asphalt Concrete Binder Course Mixture Containing Binary Blended Cementitious Filler , 2017 .

[96]  Lei Gao,et al.  Developing an optional multiple repeated load test to evaluate permanent deformation of asphalt mixtures based on axle load spectrum , 2016 .

[97]  Qiang Li,et al.  Permanent Deformation Model Based on Shear Properties of Asphalt Mixtures , 2011 .

[98]  Tao Ma,et al.  Evaluating the rutting resistance of asphalt mixtures using a simplified triaxial repeated load test , 2016 .

[99]  Baoshan Huang,et al.  Laboratory evaluation of moisture susceptibility of foamed warm mix asphalt containing high percentages of RAP , 2012 .

[100]  Jian-Shiuh Chen,et al.  How good are linear viscoelastic properties of asphalt binder to predict rutting and fatigue cracking? , 1999, Journal of Materials Engineering and Performance.

[101]  Hugues Chollet,et al.  Effects of accelerating and decelerating tramway loads on bituminous pavement , 2010 .

[102]  Jie Han,et al.  Wheel tracking methods to evaluate moisture sensitivity of hot-mix asphalt mixtures , 2016 .

[103]  Yue Xiao,et al.  A review on hydronic asphalt pavement for energy harvesting and snow melting , 2015 .

[104]  Robert L. Lytton,et al.  Novel Method for Moisture Susceptibility and Rutting Evaluation Using Hamburg Wheel Tracking Test , 2014 .

[105]  A. Sumalee,et al.  The use of natural rubber latex as a renewable and sustainable modifier of asphalt binder , 2017 .

[106]  Yongchun Cheng,et al.  Laboratory evaluation on performance of diatomite and glass fiber compound modified asphalt mixture , 2015 .

[107]  Abbas Babazadeh,et al.  Evaluation of polyphosphoric acid-modified binders using multiple stress creep and recovery and linear amplitude sweep tests , 2016 .

[108]  Lubinda F. Walubita,et al.  Comparison of flow number, dynamic modulus, and repeated load tests for evaluation of HMA permanent deformation , 2013 .

[109]  Hui Wang,et al.  Investigation of Layer Contributions to Asphalt Pavement Rutting , 2009 .

[110]  F. Moreno-Navarro,et al.  The use of additives for the improvement of the mechanical behavior of high modulus asphalt mixes , 2014 .

[111]  John M. Boone,et al.  Micromechanical investigation of open-graded asphalt friction courses’ rutting mechanisms , 2013 .

[112]  Cheng Pei Feng,et al.  Study on Marshall and Rutting test of SMA at abnormally high temperature , 2013 .

[113]  Babagoli Rezvan,et al.  Evaluation of rutting performance of stone matrix asphalt mixtures containing warm mix additives , 2017 .

[114]  A. Sha,et al.  Modification mechanism of high modulus asphalt binders and mixtures performance evaluation , 2015 .

[115]  M. Elseifi,et al.  Laboratory Performance of Asphalt Mixtures Containing Recycled Asphalt Shingles, Reclaimed Asphalt Pavement, and Recycling Agents , 2017 .

[116]  Jiming Yin,et al.  Improving the performance of asphalt mixture by addition of short-thin wheat straw pieces , 2016 .

[117]  Joel Oliveira,et al.  Use of a warm mix asphalt additive to reduce the production temperatures and to improve the performance of asphalt rubber mixtures , 2013 .

[118]  Tong Lu,et al.  Evaluation of optimized bio-asphalt containing high content waste cooking oil residues , 2017 .

[119]  Fujie Zhou,et al.  Development of new mix design method for asphalt mixtures containing RAP and rejuvenators , 2016 .

[120]  Du Yinfei,et al.  A novel strategy of inducing solar absorption and accelerating heat release for cooling asphalt pavement , 2018 .

[121]  Praveen Kumar,et al.  Effect of type of aggregate on permanent deformation of bituminous concrete mixes , 2016 .

[122]  A. Synnefa,et al.  Development and testing of thermochromic coatings for buildings and urban structures , 2009 .

[123]  D. Sybilski.  Zero-Shear Viscosity of Bituminous Binder and Its Relation to Bituminous Mixture's Rutting Resistance , 1996 .

[124]  Kwang W. Kim,et al.  Investigation of rutting potential of Open Graded Friction Course (OGFC) mixes using asphalt pavement analyzer , 2011 .

[125]  Y. Richard Kim,et al.  Mechanistic performance evaluation of pavement sections containing RAP and WMA additives in Manitoba , 2017 .

[126]  Feng Xing,et al.  Utilization of macro encapsulated phase change materials for the development of thermal energy storage and structural lightweight aggregate concrete , 2015 .

[127]  Xiaoming Huang,et al.  RETRACTED: Effect of segregation on rutting resistance of asphalt pavement , 2017 .

[128]  Yasir Ali,et al.  Permanent deformation prediction of asphalt concrete mixtures – A synthesis to explore a rational approach , 2017 .

[129]  Soon-Jae Lee,et al.  Performance properties of CRM binders with wax warm additives , 2014 .

[130]  D. Sybilski,et al.  Relationship between absolute viscosity of polymer-modified bitumens and rutting resistance of pavement , 1994 .

[131]  Terhi Pellinen,et al.  Creep-recovery behavior of bituminous binders and its relation to asphalt mixture rutting , 2015 .

[132]  John E. Haddock,et al.  Development of a mid-depth profile monitoring system for accelerated pavement testing , 2017 .

[133]  Jinze Song,et al.  Dilation Behavior of Hot Mix Asphalt Under Triaxial Loading , 2007 .

[134]  P S Kandhal,et al.  EVALUATION OF ASPHALT PAVEMENT ANALYZER AS A TOOL TO PREDICT RUTTING , 2002 .

[135]  Fujie Zhou,et al.  Development, Calibration, and Validation of a New M-E Rutting Model for HMA Overlay Design and Analysis , 2011 .

[136]  J. Boone,et al.  A micromechanical approach to investigate asphalt concrete rutting mechanisms , 2012 .

[137]  Shafeeq Ahmed,et al.  Empirical Correlation of Permanent Deformation Tests for Evaluating the Rutting Response of Conventional Asphaltic Concrete Mixtures , 2017 .

[138]  Qingli Dai,et al.  Mechanical performance of asphalt mixtures modified by bio-oils derived from waste wood resources , 2014 .

[139]  N Paul Khosla,et al.  Laboratory Evaluation of Warm-Mix Asphalt Mixtures for Moisture and Rutting Susceptibility , 2015 .

[140]  Jorge G. Zornberg,et al.  Mechanical response of flexible pavements enhanced with geogrid-reinforced asphalt overlays , 2016 .

[141]  R. Christopher Williams,et al.  Improving fatigue and low temperature performance of 100% RAP mixtures using a soybean-derived rejuvenator , 2017 .

[142]  Tao Xu,et al.  Investigation into causes of in-place rutting in asphalt pavement , 2012 .

[143]  M. Santamouris,et al.  A study of the thermal performance of reflective coatings for the urban environment , 2006 .

[144]  Yiqiu Tan,et al.  Using DSR and MSCR tests to characterize high temperature performance of different rubber modified asphalt , 2016 .

[145]  John D'Angelo,et al.  Refinement of Superpave High-Temperature Binder Specification Based on Pavement Performance in the Accelerated Loading Facility , 2003 .

[146]  John T Harvey,et al.  Corrigendum: The use of reflective and permeable pavements as a potential practice for heat island mitigation and stormwater management , 2013 .

[147]  Nam H Tran,et al.  Strategies for Design and Construction of High-Reflectance Asphalt Pavements , 2009 .

[148]  Dar-Hao Chen,et al.  Evaluation of Asphalt Overlay Permanent Deformation Based on Ground-Penetrating Radar Technology , 2016 .

[149]  Tom Scullion,et al.  VERIFICATION AND MODELING OF THREE-STAGE PERMANENT DEFORMATION BEHAVIOR OF ASPHALT MIXES , 2004 .

[150]  P. Jaskula,et al.  Thermal stabilization and permanent deformation resistance of LWA/PCM-modified asphalt road surfaces , 2017 .

[151]  Bouzid Choubane,et al.  Comparison of rutting resistance of unmodified and SBS-modified Superpave mixtures by accelerated pavement testing , 2008 .

[152]  H. A. Nageim,et al.  Performance Analysis of a Cold Asphalt Concrete Binder Course Containing High-Calcium Fly Ash Utilizing Waste Material , 2017, Journal of Materials in Civil Engineering.

[153]  Y. Richard Kim,et al.  Numerical evaluation of pavement design parameters for the fatigue cracking and rutting performance of asphalt pavements , 2016 .

[154]  Animesh Das,et al.  A re-visit to the development of fatigue and rutting equations used for asphalt pavement design , 2008 .

[155]  Haleh Azari,et al.  Verification of Rutting Predictions from Mechanistic–Empirical Pavement Design Guide by Use of Accelerated Loading Facility Data , 2008 .

[156]  Preeda Chaturabong,et al.  Mechanisms of asphalt mixture rutting in the dry Hamburg Wheel Tracking test and the potential to be alternative test in measuring rutting resistance , 2017 .

[157]  Benjamin C. Cox.  Cold in-place recycling characterization framework for single or multiple component binder systems , 2015 .

[158]  Aboelkasim Diab,et al.  Environmental and mechanical performance of crumb rubber modified warm mix asphalt using Evotherm , 2017 .

[159]  Carl L Monismith,et al.  Pavement Rutting Performance Prediction by Integrated Weibull Approach , 2008 .

[160]  Yiqiu Tan,et al.  Effect of multi-walled carbon nanotubes on the performance of styrene–butadiene–styrene copolymer modified asphalt , 2017 .

[161]  C. Feng,et al.  Effects of high-density polyethylene and crumb rubber powder as modifiers on properties of hot mix asphalt , 2017 .

[162]  Herv,et al.  Advances in Interlaboratory Testing and Evaluation of Bituminous Materials , 2013 .

[163]  Zhihong Xu,et al.  Comparison Between Flat Rubber Wheeled Loaded Wheel Tester and Asphalt Pavement Analyzer , 2007 .

[164]  Serji N. Amirkhanian,et al.  Impacts of multiple-polymer components on high temperature performance characteristics of airfield modified binders , 2017 .

[165]  Rouzbeh Ghabchi,et al.  Laboratory characterisation of asphalt mixes containing RAP and RAS , 2016 .

[166]  Prithvi S. Kandhal,et al.  Precision of Marshall Stability and Flow Test Using 6-in. (152.4-mm) Diameter Specimens , 1996 .

[167]  Tom Scullion,et al.  Hot-Mix Asphalt Permanent Deformation Evaluated by Hamburg Wheel Tracking, Dynamic Modulus, and Repeated Load Tests , 2012 .