Analytical method to predict two-phase flow pattern in horizontal micro-capillaries

An a priori prediction of multiphase flow pattern in micro-capillaries or microstructured reactors (MSR) is required for their rational design. The state-of-the-art numerical models require huge computational efforts. In the present work, an analytical model based on flow stability analysis has been applied to study the flow patterns in MSR. In order to simplify the task, a coaxial capillary geometry was chosen as a model of MSR and the two-phase flow was characterized in terms of the rate of perturbation in relation to the axial velocity. Liquid-liquid flow experiments were carried out in glass micro-capillary equipped with high-speed camera under various operating conditions such as flow velocity, flow ratios and viscosity ratios. The volume of fluid (VOF) model by ANSYS Fluent software was applied to predict the flow pattern details numerically. The results obtained were consistent with the experimental observations. Finally, the experimental and simulation results were rationalized in terms of dimensionless numbers allowing simple a priori prediction of the flow pattern in MSR. (C) 2012 Elsevier Ltd. All rights reserved.

[1]  D. Agar,et al.  CFD modelling of mass transfer with and without chemical reaction in the liquid–liquid slug flow microreactor , 2007 .

[2]  David Quéré,et al.  Liquid trains in a tube , 2000 .

[3]  D. Joseph,et al.  Long wave and lubrication theories for core‐annular flow , 1991 .

[4]  John William Strutt,et al.  Scientific Papers: On the Instability of Cylindrical Fluid Surfaces , 2009 .

[5]  Albert Renken,et al.  CFD modelling of liquid–liquid multiphase microstructured reactor: Slug flow generation , 2010 .

[6]  J. Burns,et al.  Development of a Microreactor for Chemical Production , 1999 .

[7]  Geoffrey Ingram Taylor,et al.  The formation of emulsions in definable fields of flow , 1934 .

[8]  Christophe Clanet,et al.  Transition from dripping to jetting , 1999, Journal of Fluid Mechanics.

[9]  Albert Renken,et al.  Liquid-liquid two-phase flow patterns and mass transfer characteristics in rectangular glass microreactors , 2008 .

[10]  David P. Trauernicht,et al.  A new method for deflecting liquid microjets , 2002 .

[11]  D. Agar,et al.  Computational modelling of slug flow in a capillary microreactor , 2007 .

[12]  A. E. Gill,et al.  Analysis of the stability of axisymmetric jets , 1962, Journal of Fluid Mechanics.

[13]  Charles E. Hickox,et al.  Instability due to Viscosity and Density Stratification in Axisymmetric Pipe Flow , 1971 .

[14]  S. Tomotika.  Breaking up of a Drop of Viscous Liquid Immersed in Another Viscous Fluid Which is Extending at a Uniform Rate , 1936 .

[15]  J. Burns,et al.  The intensification of rapid reactions in multiphase systems using slug flow in capillaries. , 2001, Lab on a chip.

[16]  Prasanta Kumar Das,et al.  Review of oil water core annular flow , 2009 .

[17]  G. Tryggvason,et al.  Breakup mode of an axisymmetric liquid jet injected into another immiscible liquid , 2006 .

[18]  C. W. Hirt,et al.  Volume of fluid (VOF) method for the dynamics of free boundaries , 1981 .

[19]  M. N. Kashid.  Experimental and modelling studies on liquid-liquid slug flow capillary microreactors , 2008 .

[20]  Chia-Shun Yih,et al.  Instability due to viscosity stratification , 1967, Journal of Fluid Mechanics.

[21]  Armand Ajdari,et al.  Stability of a jet in confined pressure-driven biphasic flows at low reynolds numbers. , 2007, Physical review letters.

[22]  C. Vuik,et al.  Core-annular flow through a horizontal pipe: Hydrodynamic counterbalancing of buoyancy force on core , 2007 .

[23]  R. D. Vigil,et al.  Forced instability of core-annular flow in capillary constrictions , 2011 .

[24]  R. Ismagilov,et al.  Effects of viscosity on droplet formation and mixing in microfluidic channels , 2004 .

[25]  U. Gösele,et al.  Theory of bimolecular reaction rates limited by anisotropic diffusion , 1976 .

[26]  David F. Fletcher,et al.  On the CFD modelling of Taylor flow in microchannels , 2009 .

[27]  L. Rayleigh.  On The Instability Of Jets , 1878 .

[28]  J. Brackbill,et al.  A continuum method for modeling surface tension , 1992 .

[29]  G. Ooms.  The hydrodynamic stability of core-annular flow of two ideal liquids , 1972 .

[30]  Armand Ajdari,et al.  Suppression of instabilities in multiphase flow by geometric confinement. , 2009, Physical review. E, Statistical, nonlinear, and soft matter physics.

[31]  D. Weitz,et al.  Dripping to jetting transitions in coflowing liquid streams. , 2007, Physical review letters.

[32]  A. Gañán-Calvo,et al.  Spatiotemporal instability of a confined capillary jet. , 2008, Physical review. E, Statistical, nonlinear, and soft matter physics.

[33]  Yuchao Zhao,et al.  Liquid-liquid two-phase mass transfer in the T-junction microchannels , 2007 .

[34]  Daniel D. Joseph,et al.  CORE-ANNULAR FLOWS , 1997 .

[35]  J. Tsamopoulos,et al.  Dynamics of the axisymmetric core-annular flow. II. The less viscous fluid in the core, saw tooth waves , 2002 .

[36]  G. Whitesides,et al.  Formation of droplets and bubbles in a microfluidic T-junction-scaling and mechanism of break-up. , 2006, Lab on a chip.

[37]  Helen Song,et al.  Formation of droplets and mixing in multiphase microfluidics at low values of the Reynolds and the capillary numbers , 2003 .

[38]  L. Rayleigh,et al.  XIX. On the instability of cylindrical fluid surfaces , 1892 .

[39]  D. Agar,et al.  The capillary-microreactor: a new reactor concept for the intensification of heat and mass transfer in liquid–liquid reactions , 2003 .

[40]  David W. Agar,et al.  Hydrodynamics of liquid–liquid slug flow capillary microreactor: Flow regimes, slug size and pressure drop , 2007 .

[41]  L. Rayleigh.  On the Capillary Phenomena of Jets , 1879 .

[42]  T. Tate Esq.,et al.  XXX. On the magnitude of a drop of liquid formed under different circumstances , 1864 .

[43]  Volker Hessel,et al.  Ionic liquid synthesis in a microstructured reactor for process intensification , 2007 .

[44]  Hariprasad J. Subramani,et al.  Dripping-jetting transitions in a dripping faucet. , 2004, Physical review letters.