Modeling Resistance Instabilities of Set and Reset States in Phase Change Memory With Ge-Rich GeSbTe

To satisfy the growing market demand for embedded nonvolatile memory, alternative solutions to Flash technology are currently under investigation. Among these, phase change memory (PCM) is attracting strong interest due to the low cost of integration with the CMOS front-end and good scalability. Embedded PCM, however, must feature high reliability during both packaging and functional stages. This paper studies reliability of PCM based on Ge-rich GeSbTe, providing evidence for resistance drift and decay in both the reset and set states. Set-state instability is attributed to grain-boundary relaxation and grain growth. A unified model is presented, capable of predicting the reliability of set/reset states at elevated temperature.

[1]  Unified reliability modeling of Ge-rich phase change memory for embedded applications , 2013, 2013 IEEE International Electron Devices Meeting.

[2]  Kumar Virwani,et al.  Observation and modeling of polycrystalline grain formation in Ge2Sb2Te5 , 2012 .

[3]  G. Servalli,et al.  A 45nm generation Phase Change Memory technology , 2009, 2009 IEEE International Electron Devices Meeting (IEDM).

[4]  K. Saraswat,et al.  A model for conduction in polycrystalline silicon—Part I: Theory , 1981, IEEE Transactions on Electron Devices.

[5]  G. Reimbold,et al.  Trade-off between SET and data retention performance thanks to innovative materials for phase-change memory , 2013, 2013 IEEE International Electron Devices Meeting.

[6]  Eric Pop,et al.  Low-Power Switching of Phase-Change Materials with Carbon Nanotube Electrodes , 2011, Science.

[7]  Daniele Ielmini,et al.  Physical origin of the resistance drift exponent in amorphous phase change materials , 2011 .

[8]  G. Reimbold,et al.  On Carbon doping to improve GeTe-based Phase-Change Memory data retention at high temperature , 2010, 2010 IEEE International Memory Workshop.

[9]  D. Ielmini,et al.  Recovery and Drift Dynamics of Resistance and Threshold Voltages in Phase-Change Memories , 2007, IEEE Transactions on Electron Devices.

[10]  M. Breitwisch,et al.  A method to maintain phase-change memory pre-coding data retention after high temperature solder bonding process in embedded systems , 2011, 2011 Symposium on VLSI Technology - Digest of Technical Papers.

[11]  H. L. Lung,et al.  A high performance phase change memory with fast switching speed and high temperature retention by engineering the GexSbyTez phase change material , 2011, 2011 International Electron Devices Meeting.

[12]  H. L. Lung,et al.  A thermally robust phase change memory by engineering the Ge/N concentration in (Ge, N)xSbyTe z phase change material , 2012, 2012 International Electron Devices Meeting.

[13]  D. Ielmini,et al.  Modeling of Threshold-Voltage Drift in Phase-Change Memory (PCM) Devices , 2012, IEEE Transactions on Electron Devices.

[14]  Daniele Ielmini,et al.  Analytical model for subthreshold conduction and threshold switching in chalcogenide-based memory devices , 2007 .

[15]  Jing Li,et al.  Explore physical origins of resistance drift in phase change memory and its implication for drift-insensitive materials , 2011, 2011 International Electron Devices Meeting.

[16]  C. M. Lin,et al.  Atomic-level engineering of phase change material for novel fast-switching and high-endurance PCM for storage class memory application , 2013, 2013 IEEE International Electron Devices Meeting.

[17]  R. O. Jones,et al.  Structural phase transitions on the nanoscale: The crucial pattern in the phase-change materials Ge2Sb2Te5 and GeTe , 2007 .

[18]  Andrea L. Lacaita,et al.  Unified mechanisms for structural relaxation and crystallization in phase-change memory devices , 2009 .

[19]  E. Varesi,et al.  Atomic migration in phase change materials , 2013, 2013 IEEE International Electron Devices Meeting.

[20]  A. Pirovano,et al.  Statistical analysis and modeling of programming and retention in PCM arrays , 2007, 2007 IEEE International Electron Devices Meeting.

[21]  G. Kamarinos,et al.  Study of leakage current in n-channel and p-channel polycrystalline silicon thin-film transistors by conduction and low frequency noise measurements , 1997 .

[22]  Elisabetta Palumbo,et al.  Overcoming Temperature Limitations in Phase Change Memories With Optimized ${\rm Ge}_{\rm x}{\rm Sb}_{\rm y}{\rm Te}_{\rm z}$ , 2013, IEEE Transactions on Electron Devices.

[23]  E. Vianello,et al.  Electrical performances of SiO2-doped GeTe for phase-change memory applications , 2013, 2013 IEEE International Reliability Physics Symposium (IRPS).

[24]  D. Ielmini,et al.  Reliability study of phase-change nonvolatile memories , 2004, IEEE Transactions on Device and Materials Reliability.

[25]  W. J. Wang,et al.  Breaking the Speed Limits of Phase-Change Memory , 2012, Science.

[26]  Andrea L. Lacaita,et al.  Temperature acceleration of structural relaxation in amorphous Ge2Sb2Te5 , 2008 .