Microstructure and sliding wear behavior of nanostructured Ni60–TiB2 composite coating sprayed by HVOF technique
暂无分享,去创建一个
D. Zeng | X. Zhong | Zhongwu Liu | Hongya Yu | W. Qiu | Wu Yaosha | Li Shangzhou
[1] Yongbing Li,et al. Synthesis of nanocrystalline NiCrC alloy feedstock powders for thermal spraying by cryogenic ball milling , 2009 .
[2] Dong-bai Sun,et al. The influence of HVAF powder feedstock characteristics on the sliding wear behaviour of WC-NiCr coatings , 2008 .
[3] L. Berger,et al. Microstructure and Properties of HVOF-Sprayed WC-(W,Cr)2C-Ni Coatings , 2008 .
[4] J. Zhang,et al. Fabrication of conventional and nanostructured NiCrC coatings via HVAF technique , 2008 .
[5] Jining He,et al. Microstructure and properties of Al2O3-13%TiO2 coatings sprayed using nanostructured powders , 2007 .
[6] J. Bernardi,et al. Microstructure and mechanical properties of HVOF sprayed nanocrystalline Cr3C2-25(Ni20Cr) coating , 2006 .
[7] S. Prakash,et al. Hot corrosion resistance of high-velocity oxyfuel sprayed coatings on a nickel-base superalloy in molten salt environment , 2006 .
[8] B. Marple,et al. Enhanced ductility in thermally sprayed titania coating synthesized using a nanostructured feedstock , 2005 .
[9] H. Liao,et al. Relationships between in-flight particle characteristics and coating microstructure with a twin wire arc spray process and different working conditions , 2004 .
[10] P. Shipway,et al. Abrasive wear behaviour of Ni(Cr)–TiB2 coatings deposited by HVOF spraying of SHS-derived cermet powders , 2003 .
[11] P. Shipway,et al. Thermally sprayed Ni(Cr)–TiB2 coatings using powder produced by self-propagating high temperature synthesis: microstructure and abrasive wear behaviour , 2002 .
[12] C. Berndt,et al. Bimodal distribution of mechanical properties on plasma sprayed nanostructured partially stabilized zirconia , 2002 .
[13] P. Shipway,et al. A comparison of the abrasive wear behaviour of HVOF sprayed titanium carbide- and titanium boride-based cermet coatings , 2001 .
[14] K. Yukimura,et al. Tribological properties of nanostructured and conventional WC–Co coatings deposited by plasma spraying , 2001 .
[15] L. Shaw,et al. The dependency of microstructure and properties of nanostructured coatings on plasma spray conditions , 2000 .
[16] J. Matějíček,et al. Substrate temperature effects on splat formation, microstructure development and properties of plasma sprayed coatings Part I: Case study for partially stabilized zirconia☆ , 1999 .
[17] J. Matějíček,et al. Substrate temperature effects on the splat formation, microstructure development and properties of plasma sprayed coatings: Part II: case study for molybdenum , 1999 .
[18] P. H. Shipway,et al. Abrasive wear behaviour of conventional and nanocomposite HVOF-sprayed WC–Co coatings , 1999 .
[19] B. Mellor,et al. Fracture toughness and crack morphologies in eroded WC-Co-Cr thermally sprayed coatings , 1998 .
[20] J. Celis,et al. Sliding wear behavior of thermally sprayed 75/25 Cr3C2/NiCr wear resistant coatings , 1996 .
[21] M. Bjordal,et al. Combined erosion and corrosion of thermal sprayed WC and CrC coatings , 1995 .
[22] Samuel J. Schneider,et al. Ceramics and glasses , 1991 .
[23] T. R. Wilshaw,et al. Quasi-static solid particle damage in brittle solids—I. Observations analysis and implications , 1976 .