The self-magnetic pinch (SMP) diode is an intense radiographic source fielded on the Radiographic Integrated Test Stand (RITS-6) accelerator at Sandia National Laboratories in Albuquerque, NM. The accelerator is an inductive voltage adder (IVA) that can operate from 2-10 MV with currents up to 160 kA (at 7 MV). The SMP diode consists of an annular cathode separated from a flat anode, holding the bremsstrahlung conversion target, by a vacuum gap. Until recently the primary imaging diagnostic utilized image plates (storage phosphors) which has generally low DQE at these photon energies along with other problems. The benefits of using image plates include a high-dynamic range, good spatial resolution, and ease of use. A scintillator-based X-ray imaging system or “gamma camera” has been fielded in front of RITS and the SMP diode which has been able to provide vastly superior images in terms of signal-to-noise with similar resolution and acceptable dynamic range.
[1]
Robert C. Bush,et al.
P‐95: Fresnel Lenses in Rear Projection Displays
,
2001
.
[2]
J. Rowlands,et al.
The physics of computed radiography.
,
2002,
Physics in medicine and biology.
[3]
S. Portillo,et al.
Status of the 10 MV, 120 kA RITS-6 Inductive Voltage Adder
,
2005,
2005 IEEE Pulsed Power Conference.
[4]
C. Bentley,et al.
Evaluation of the sensitivity and fading characteristics of an image plate system for x-ray diagnostics.
,
2008,
The Review of scientific instruments.
[5]
K. Hahn,et al.
Overview of Self-Magnetically Pinched-Diode Investigations on RITS-6
,
2010,
IEEE Transactions on Plasma Science.