Pd nanofilm supported on C@TiO2 nanocone core/shell nanoarrays: A facile preparation of high performance electrocatalyst for H2O2 electroreduction in acid medium

A new facile preparation of three-dimensional (3D) electrode (Pd NF-C@TiO2) that Pd nanofilm supported on the nanoarrays consisting of carbon coating TiO2 nanocones (C@TiO2) is reported. The synthesis of electrode involves the fabrication of C@TiO2 through a thermal evaporation method, followed by electrodeposition of Pd nanofilm. The morphology and structure of the as-prepared electrode are characterized by scanning electron microscopy and X-ray diffraction. The open 3D electrode shows a unique open structure allowing the full utilization of Pd surface active sites. Electrochemical methods including linear sweep voltammetry and chronoamperometry are used to examine the catalytic activity of the electrode for H2O2 electroreduction in H2SO4 solution. Results reveal that the electrode exhibits significantly higher catalytic activity than the conventional electrode made with commercial Pd/C powder. At the potential of 0 V in 2.0 mol L−1 H2O2 + 2.0 mol L−1 H2SO4, the reduction current density of 0.415 A cm−2 is successfully achieved and displayed a slight decrease within 1000 s test period, which exhibits high catalytic activity and the superior stability of Pd NF-C@TiO2 electrode for H2O2 electroreduction in acid medium.

[1]  T. Mallát,et al.  Electrochemical study of palladium powder catalysts , 1976 .

[2]  L. Birry,et al.  DMFC electrode preparation, performance and proton conductivity measurements , 2009 .

[3]  H. I. Sarac,et al.  Investigation of Ni Foam Effect for Direct Borohydride Fuel Cell , 2012 .

[4]  B. Liu,et al.  Performance improvement of a micro borohydride fuel cell operating at ambient conditions , 2005 .

[5]  C. Ponce de León,et al.  A direct borohydride—Acid peroxide fuel cell , 2007 .

[6]  B. Liu,et al.  Development of high-performance planar borohydride fuel cell modules for portable applications , 2008 .

[7]  J. Kauffmann,et al.  Electrochemical behavior of H2O2 on gold , 1997 .

[8]  A. Shukla,et al.  Electro-reduction of hydrogen peroxide on iron tetramethoxy phenyl porphyrin and lead sulfate electrodes with application in direct borohydride fuel cells , 2005 .

[9]  H. I. Sarac,et al.  Effects of operation conditions on direct borohydride fuel cell performance , 2008 .

[10]  Guiling Wang,et al.  A direct NaBH4-H2O2 fuel cell using Ni foam supported Au nanoparticles as electrodes , 2010 .

[11]  Lei Zhang,et al.  Electrocatalytic reduction of O2 and H2O2 by adsorbed cobalt tetramethoxyphenyl porphyrin and its application for fuel cell cathodes , 2006 .

[12]  A. Sanli,et al.  Response to Disselkamp: Direct peroxide/peroxide fuel cell as a novel type fuel cell , 2011 .

[13]  R. Rego,et al.  A new route to prepare carbon paper-supported Pd catalyst for oxygen reduction reaction , 2010 .

[14]  Fan Yang,et al.  Facile synthesis of porous (Co, Mn)3O4 nanowires free-standing on a Ni foam and their catalytic performance for H2O2 electroreduction , 2013 .

[15]  D. Northwood,et al.  Electrocatalysis of Borohydride Oxidation on Colloidal Pt and Pt-Alloys (Pt-Ir, Pt-Ni, and Pt-Au) and Application for Direct Borohydride Fuel Cell Anodes , 2006 .

[16]  David L. Carroll,et al.  Direct NaBH4/H2O2 fuel cells , 2007 .

[17]  John J. Rusek,et al.  Aluminum–hydrogen peroxide fuel-cell studies , 2003 .

[18]  Jiujun Zhang,et al.  Electrochemical reduction of oxygen and hydrogen peroxide catalyzed by a surface copper(II)–2,4,6-tris(2-piridil)-1,3,5-triazine complex adsorbed on a graphite electrode , 2005 .

[19]  Jianguo Zhou,et al.  Preparation of high performance Pd catalysts supported on untreated multi-walled carbon nanotubes for formic acid oxidation , 2010 .

[20]  H. I. Sarac,et al.  Influences of sodium borohydride concentration on direct borohydride fuel cell performance , 2010 .

[21]  James M. Cichon,et al.  A study of cathode catalysis for the aluminium/hydrogen peroxide semi-fuel cell , 1999 .

[22]  Guiling Wang,et al.  Catalytic behavior of Co3O4 in electroreduction of H2O2 , 2008 .

[23]  Guiling Wang,et al.  Pd–Ru/C as the electrocatalyst for hydrogen peroxide reduction , 2008 .

[24]  Q. Xin,et al.  Nanostructured silver catalyzed nickel foam cathode for an aluminum-hydrogen peroxide fuel cell , 2006 .

[25]  J. Farcy,et al.  Electrochemical study of hydrogen interaction with palladium and platinum , 1975 .

[26]  J. Yin,et al.  An Alkaline Al–H2O2 Semi‐Fuel Cell Based on a Nickel Foam Supported Co3O4 Nanowire Arrays Cathode , 2011 .

[27]  P. Chu,et al.  One-step growth and field emission properties of quasialigned TiO2 nanowire/carbon nanocone core-shell nanostructure arrays on Ti substrates , 2008 .

[28]  G. Ertl,et al.  Autocatalytic mechanism of H2O2 reduction on Ag electrodes in acidic electrolyte: experiments and simulations , 1999 .

[29]  Guiling Wang,et al.  Kinetics of hydrogen peroxide electroreduction on Pd nanoparticles in acidic medium , 2008 .

[30]  Yawen Tang,et al.  Effect of Pd ions in electrolyte on electrocatalytic performance of carbon supported Pd catalyst for oxidation of formic acid , 2013 .

[31]  H. I. Sarac,et al.  Improving the direct borohydride fuel cell performance with thiourea as the additive in the sodium borohydride solution , 2010 .

[32]  R. Pattabiraman,et al.  Electrochemical investigations on carbon supported palladium catalysts , 1997 .

[33]  Fan Yang,et al.  CuO nanosheets grown on cupper foil as the catalyst for H2O2 electroreduction in alkaline medium , 2012 .

[34]  J. Yin,et al.  The open circuit potential of hydrogen peroxide at noble and glassy carbon electrodes in acidic and basic electrolytes , 2011 .

[35]  Wang Guiling,et al.  Nickel Foam Supported-Co3O4 Nanowire Arrays for H2O2 Electroreduction , 2009 .

[36]  Q. Xin,et al.  Nanostructured palladium-silver coated nickel foam cathode for magnesium–hydrogen peroxide fuel cells , 2006 .

[37]  J. Yin,et al.  Preparation of Au nanodendrites supported on carbon fiber cloth and its catalytic performance to H2O2 electroreduction and electrooxidation , 2013 .

[38]  Xiaolin Zheng,et al.  Sol-flame synthesis: a general strategy to decorate nanowires with metal oxide/noble metal nanoparticles. , 2013, Nano letters.

[39]  A. Sanli,et al.  Electrooxidation of hydrogen peroxide and sodium borohydride on Ni deposited carbon fiber electrode , 2011 .

[40]  Fan Yang,et al.  Direct peroxide–peroxide fuel cell – Part 1: The anode and cathode catalyst of carbon fiber cloth supported dendritic Pd , 2012 .

[41]  C. Du,et al.  Direct peroxide–peroxide fuel cell – Part 2: Effects of conditions on the performance , 2012 .

[42]  W. J. Lorenz,et al.  Structural changes of surface oxide layers on palladium , 1982 .

[43]  S. Miertus,et al.  A glucose/hydrogen peroxide biofuel cell that uses oxidase and peroxidase as catalysts by composite bulk-modified bioelectrodes based on a solid binding matrix. , 2002, Bioelectrochemistry.